Embedded dual port Flex-10 10GbE multifunction server adapter
7.
Internal USB connector
4.
Up to two (2) AMD Opteron™ 2300 Series processors
What's
New
Support for HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
At
A Glance
This document covers the HP ProLiant BL495c G5 server
blade only. For more information on HP BladeSystem c-Class Infrastructure
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please
see the following QuickSpecs:
The HP ProLiant BL495c G5 Server
Blade virtualization blade eliminates the performance bottlenecks of a
virtual machine host. Engineered with more memory and I/O than any other
half-height blade server, this world's first virtualization blade maximizes
the number and performance of VMs that you can deploy per blade.
HP ProLiant BL495c G5 server blade includes:
Processor:
Up to two (2) Quad-Core AMD Opteron™ 2300 series processors
Supports up to 2.9 GHz, 2.2 GHz HyperTransport™; 512 KB
Level 2 cache memory per core; 6 MB Level 3 cache
Supports up to 2.3 GHz, 1 GHz HyperTransport™; 512 KB Level
2 cache memory per core; 2 MB Level 3 cache
Dual-Link AMD HyperTransport connection between processors for
maximum performance
AMD Dual Dynamic Power Management™ for optimum performance
and reduced power consumption
ServerWorks HT-1000 and HT-2100 chipsets
Memory:
Up to 128 GB of memory, supported by sixteen (16) slots of PC2-5300
Registered DIMMs at 667MHz or 64GB of memory, supported by sixteen
(16) slots of PC2-6400 Registered DIMMs at 800MHz
Supporting memory interleaving (2:1) NOTE: The memory bus will operate
at 800 MHz with four (4) or fewer DIMMs per processor, 667 MHz with
six (6) DIMMs per processor, and 533 MHz with eight (8) DIMMs per
processor.
Storage Controller:
HP Embedded SATA Controller NOTE: RAID functionality
requires the use of an optional Smart Array mezzanine card. See the
Storage Controller options section below.
Internal Drive Support:
Up to two (2) non-hot plug SATA Solid State Drives (SSD)
With an attached SB40c Storage Blade, up to six (6) hot plug SFF
Serial Attached SCSI (SAS) or SATA Hard Drives (optional)
Network Controller:
Embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapter NOTE: Flex-10 capability
requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet
module. Learn more at: www.hp.com/go/virtualconnect.
NOTE: Each port is autosensing 1Gb/10Gb, and can interoperate
with 1Gb HP BladeSystem c-Class interconnect components.
One (1) additional 10/100 server adapter dedicated to iLO 2 Management
Mezzanine Support:
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual-Port Fibre Channel Mezzanine (4-Gb or 8-Gb) options for
SAN connectivity
iSCSI Ethernet mezzanine option for optimized iSCSI connectivity
Ethernet server adapter mezzanine options for additional network
ports
4X DDR InfiniBand (IB) Mezzanine (20 Gb/s) options for low latency
server interconnectivity (based on Mellanox technology)
I/O Accelerator mezzanine options for high transaction rate
local storage
Internal USB Support:
One (1) internal USB 2.0 connector for security
key devices and USB drive keys
Form Factor:
HP ProLiant BL495c G5 server blade plugs
into the BladeSystem c3000 and c7000 enclosures
Infrastructure Management:
This server blade requires the latest version of the Onboard
Administrator firmware. This firmware release may also require other
subsystem firmware upgrades. For information on the latest firmware
versions, please see the Blades Firmware Maintenance website at:
http://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
HP Integrated Lights-Out 2 (iLO 2) management processor for simplified
server setup, health monitoring and recovery, power and thermal
control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, control and optimize your IT infrastructure
through a single, simple management console. Insight Control supports
both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated
command center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. This
ultimately enables them to dynamically keep pace with the organization's
changing business requirements.
HP offers three different c-Class server
blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds
up to sixteen (16) ProLiant BL495c G5 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds
up to eight (8) HP ProLiant BL495c G5 servers plugged horizontally.
The HP BladeSystem c3000 tower enclosure is designed with casters
for sites without racks and holds up to eight (8) HP ProLiant
BL495c G5 servers plugged vertically.
Server blades, storage blades, and interconnect
modules are all designed to fit into the c7000 and c3000 enclosures.
This product is covered by a global limited
warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and repair
is available for three years from date of purchase. Support for software
and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack
services or customized service agreements. Hard drives have either
a one year or three year warrant; refer to the specific hard drive
QuickSpecs for details. NOTE: Server warranty
includes 3-year Parts, 3- year Labor, 3-year on-site support. Warranty
repairs may be accomplished through the use of Customer Self Repair
(CSR) parts. These parts fall into two categories: 1) Mandatory CSR
parts are designed for easy replacement. A travel and labor charge
will result when customers decline to replace a Mandatory CSR part;
2) Optional CSR parts are also designed for easy replacement but may
involve added complexity. Customers may choose to have HP replace
Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at::
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section.
AMD Opteron processor Model
2387 (2.8 GHz, 6 MB L3 Cache, 75W ACP) NOTE: Offered through Configure-To-Order
process only. See Factory Integration Models section for more details.
AMD Opteron processor Model
2382 (2.6 GHz, 6 MB L3 Cache, 75W ACP) NOTE: Offered through Configure-To-Order
process only. See Factory Integration Models section for more details.
Low Power AMD Opteron processor
Model 2381 HE (2.5 GHz, 6 MB L3 Cache, 55W ACP) NOTE: Offered through Configure-To-Order
process only. See Factory Integration Models section for more details.
Low Power AMD Opteron processor
Model 2376 HE (2.3 GHz, 6 MB L3 Cache, 55W ACP) NOTE: Offered through Configure-To-Order
process only. See Factory Integration Models section for more details.
Low Power AMD Opteron processor
Model 2347 HE (1.9 GHz, 2 MB L3 Cache, 55W ACP)
NOTE: AMD Opteron 2300 series processors are 64-bit, quad-core,
and support AMD Virtualization™. NOTE: Processor wattage references reflect Average CPU Power (ACP).
For more information on ACP visit: http://www.amd.com/powernow.
Upgradeability
Upgradeable to dual (2) processors
Cache Memory
512 KB Level 2 cache memory
per core
2 MB or 6 MB Level 3 cache memory
Chipset
ServerWorks HT-1000 and HT-2100
Memory
Type
PC2-5300
DDR2 Registered DIMMs at 667 MHz PC2-6400 DDR2 Registered DIMMs at 800MHz
Standard
4
GB (2 x 2 GB)
Maximum
128
GB (16 x 8 GB) at 533 MHz
NOTE:
Memory must be installed in pairs. NOTE: PC2-6400 DDR2 DIMMs are only supported with the AMD Opteron
processor Models 2376 HE, 2378, 2381 HE, 2382, 2384, 2387, 2389, 2425 HE,
2427, and 2435. NOTE: PC2-5300 DDR2 DIMMs in 8 GB capacities are supported with the
AMD Opteron processor Models 2347 HE, 2352, 2356, 2376 HE, 2378, 2381 HE,
2382, 2384, 2387, 2389, 2425 HE, 2427, and 2435. NOTE: PC2-5300 DDR2 DIMMs in 1 GB, 2 GB, and 4 GB capacities are
only supported with the AMD Opteron processor Models 2347 HE, 2352, and
2356. NOTE: The memory bus will operate at 800 MHz with four (4) or fewer
DIMMs per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz
with eight (8) DIMMs per processor.
Network Controller
Embedded NC532i Dual Port Flex-10
10GbE Multifunction Server Adapter NOTE: Flex-10 capability requires
the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn more
at: www.hp.com/go/virtualconnect. NOTE: The iSCSI offload feature of the embedded multifunction adapter
requires the HP Accelerated iSCSI Pack. For more information, please see
the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12466_div/12466_div.html
One (1) additional 10/100 server adapter dedicated to iLO 2 management
I/O Expansion Slots
Two (2) I/O expansion mezzanine slots (One x8 and one x4 PCI Express)
Integrated
Manageability
HP Integrated Lights-Out 2 (iLO
2) management processor
Storage
Controller
HP Embedded SATA Controller
(for connecting to non-hot plug SATA SDD only) NOTE: RAID functionality requires
the use of an optional Smart Array mezzanine card. See the Storage Controller
options section below.
Maximum Internal
Storage
Non-Hot Plug SATA (SATA) SSD
128GB
2 x 64GB SATA SSD
Hot Plug SFF SAS (with optional
SB40c Storage Blade attached)
1.8TB
6 x 300GB Hot Plug SAS
Graphics
Integrated ATI RN-50 1280 x
1024 x 16M color (32 MB DDR1 memory)
Graphics Resolution Supported
Resolution Color Depths
1280 x 1024, 16.7M,
64k, 256.16
1024 x 768, 16.7M, 64k, 256, 16
800 x 600, 16,7M, 64k, 256, 16
640 x 480, 16,7M, 64k, 256, 16
Fibre
Channel Support
Two (2) optional dual-port Fibre Channel HBAs are supported by the HP
ProLiant BL495c G5. Each mezzanine circuit board connects directly to
the server blade system board. These Fibre Channel HBAs are available
via option kits and must be ordered separately.
HBA mezzanine card option kits:
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology
as Emulex's renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver
compatible with all Emulex HBAs
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
(PN 403619-B21)
Uses common drivers which means that customers can standardize on
one QLogic driver whether they are using the QMH2462 or other HBAs powered
by QLogic
Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
Dual-ports for redundant path connections
Up to two FC HBAs per server blade providing redundant FC HBA support
Optimized for HP StorageWorks and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating system
environments
Compatible SAN
HP ProLiant BL495c G5 server blades are optimized for HP StorageWorks
MSA, EVA, and XP
HP ProLiant BL495c G5 server blades are compatible with select 3rd party
SANs (please see blade storage page for more details: http://h18004.www1.hp.com/products/blades/components/c-class-sans.html)
HP Virtual Connect
HP Virtual Connect simplifies server connectivity to LANs and SANs, and
reduces costs. Unique HP Flex-10 technology makes maximum use of 10Gb
Ethernet bandwidth by allowing multiple ports within a single Industry
Standard connection that can be dynamically tuned to meet individual server
requirements. HP Virtual Connect Enterprise Manager (VCEM) provides a
central console to administer connections and workloads for thousands
of servers. For more information on Virtual Connect Ethernet, Fibre Channel
and management options see: www.hp.com/go/virtualconnect
HP Insight management software
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation.
NOTE: In an effort to support reducing
our environmental impact, the HP Insight Foundation Suite for ProLiant
media will be available as a selectable option for this server at time
of order of a CTO SKU. This will allow customers to order the number of
media kits that best meet their needs and eliminate receiving unnecessary
duplicate media.
HP Integrated Lights-Out (iLO)
HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and
can be accessed from any location via a web browser. HP iLO works hand-in-hand
with HP Systems Insight Manager, Insight Control suites, and Insight Dynamics
for ProLiant, helping customers unleash the value of the ProLiant platform
and deliver the highest possible quality of IT service. For more information,
visit: www.hp.com/go/iLO
HP Insight Control
HP Insight Control, a product
option, delivers essential infrastructure management that can help save
time and money by making it easy to deploy, migrate, monitor, remote control,
and optimize your IT infrastructure through a single, simple management
console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP Insight
Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service, please
visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant
HP Insight Dynamics for ProLiant,
a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure,
while automating and reducing the cost of common data center tasks by as
much as 40 percent. As a powerfully integrated by design toolkit to accelerate
complex technology projects and simplify daily operations that ultimately
enable IT Staff personnel to dynamically keep pace with the organizations
changing business requirements. It enables them to plan capacity and power
continuously, balance across physical and virtual resources, and ensure
cost-effective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared resources
using a self-service portal. Resources provisioned can range from a single
virtual machine to complex multi-tier environments and their associated
physical and virtual resource requirements. In addition to the previous
functional benefits, it also provides a cost-effective disaster recovery
for physical and virtual environments that works with HP StorageWorks Continuous
Access software for both the Enterprise Virtual Array and the XP storage
array allowing application environments to be reactivated in minutes with
the touch of a button to a remote location.
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance Computing,
with a choice of servers, networks and software. Operating system options
include specially priced offerings for Red Hat Enterprise Linux and Novell
SLES, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering. http://www.hp.com/go/clusters
HP HPC Interconnects
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when integrated
within an HP cluster. Flexible, validated solutions can be defined with
the help of configuration tools. http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management Utility
HP Cluster Management Utility
(CMU) is an HP-licensed and HP-supported suite of tools that are used to
manage large-scale Linux ProLiant systems. CMU includes software for the
centralized provisioning, management and monitoring of nodes. CMU makes
the administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack
HP HPC Linux Value Pack (Value
Pack) is an HP-licensed and HP-supported specially priced software bundle
for the development and deployment of applications on HPC Cluster Platforms.
Value Pack includes the Platform LSF workload scheduler, the HP-MPI parallelization
library, the HP Unified Parallel C compiler and the HP Shmem library, as
well as the execution environments for the libraries and compiler. HP
HPC Linux Value Pack
Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection
Dual- and Quad-Port server adapter for redundant LAN connections
Redundant ROM on each server blade
Multiple mezzanine I/O expansion
ECC Memory
Network adapter teaming (network fault tolerance, transmit load balancing,
switch-assisted load balancing)
Industry Standard Compliance
ACPI 2.0 Compliant
PCI 2.2 Compliant
Microsoft® Logo certifications
USB 2.0 Support
Security
Power-on password
Administrator's password
Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
Integrated Lights-Out 2 can be disabled via a Global Setting
Factory Express Portfolio for
Servers and Storage
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services on your specific server
model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eConfigure Enterprise Configurator now provides factory default
racking for our HP hardware portfolio. This approach is aligned with our
strategic direction to meet the needs and expectations of our valued customers.
If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator.
HP Care Pack Services: Packaged server and storage services for increased
uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a
good time to think about what levels of support you may need. Our portfolio
of service options reduce deployment and management worries while helping
you get the most out of your server and storage investments. We take a
holistic approach to your environment, bridging servers, blades, storage,
software and network infrastructures with our packaged HP Care Pack Services
for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment
warranties have matured along with technology. Good news that can also
create problems stemming from depending on standard warranties designed
to only protect against product defects and some downtime causes. Using
a standard approach to warranty uplifts, such as HP Care Pack Services,
helps reduce downtime risks and provides operational consistency for mission-critical
and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and
storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software
support services suite sold separately, or combined with our Support Plus
and Support Plus 24 services. The portfolio also provides a combination
of integrated proactive and reactive services, such as Proactive 24 Service
and Critical Service. In addition with HP Proactive Select, you can acquire
the specific proactive constancy and technical services. HP Proactive
Select menu offers a broad set of service options that you can mix and
match depending on your specific requirements. Proactive service options
include offers for server, storage, network, SAN device, software, environment
and education services.
HP server and storage lifecycle support services offers a full spectrum
of customer care-from technology support to complex migrations to complete
managed services. HP Factory Express provides customization, integration
and deployment services for turnkey solutions. HP Education Services offer
flexible, comprehensive training on to help your IT staff get the most
out of your server and storage investments. HP Financial solutions extend
innovative financing and cost-effective asset management programs-from
purchase to equipment retirement.
Recommended
HP Care Pack Services for optimal satisfaction with your HP product
Recommended
Services
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6-
or 24-hour
Provides your IT manager with a team of support specialists who will quickly
begin troubleshooting the system to help return the hardware to operating
condition within 6 or 24 hours of the initial service request to the HP
Global Solution Center.
HP is committed to repairing your hardware within a maximum of six or
twenty four hours. The benefits include:
Improved system uptime
Predictable repair times
More effective IT resource planning
Consistent level of hardware support across your multi-technology
systems
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
Provides you with rapid remote support and if required an HP authorized
representative who will arrive on site any time and day of the year to
begin hardware maintenance service within 4 hours of the service request
being logged.
This service provides a trained HP service specialist to perform an installation
that meets HP quality standards, for:
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner.
Expedited installation, with all service prerequisites met before
the installation is performed
Installation in accordance with manufacturer's specifications, enhancing
the supportability of your HP-installed hardware and software
Service delivery at a mutually scheduled time
Allows your IT resources to stay focused on their core tasks and priorities
Availability of an HP service specialist to answer questions during
the onsite delivery of this service
Optional
HP Care Pack Services that will enhance your HP product experience
Optional
Services
HP Enhanced Network Installation & Startup for BladeSystem Switches
Provides for the configuration and testing of BladeSystem Ethernet interconnect
switches to facilitate proper implementation of network protocols and
access to advanced features.
3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who
want enhanced operational effectiveness and proactive problem identification:
Provides improved stability, availability and operational effectiveness
with an integrated hardware and software support service that combines
industry-leading reactive technical assistance with proactive account
services, giving your IT manage support from a team of service specialists.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENUC
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services
and education courses
Provides a flexible way to purchase HP best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase
your hardware and then use the credits over the next 12 months.
HP eSupport is a portfolio of technology-based services that assist you
with managing your business environment - from the desktop to the data
center.
Support Portal
The HP support portal provides one-stop access to the information, tools
and services you need to manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service
agreement. To access the support portal, visit: http://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for
your HP Servers and Storage, 24 X 7, so you can spend less time solving
problems and more time focused on your business. You can have your systems
remotely monitored for hardware failure using secure technology that's
been proven at thousands of companies around the world. In many cases,
you can avoid problems before they occur.
Customer Technical
Training
In today's cost-conscious business environment, IT professionals, developers,
consultants and users face an interesting challenge: how to keep up with
the latest technologies and expand important skills while delivering profitable
results on current projects. To help address this challenge, HP offers
innovative training solutions that help keep you up-to-date on virtualization,
server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related
topics-while spending less time away from business-critical activities.
HP Services Awards
HP Technology Services continues to be recognized for service and support
excellence by customers, partners, industry organizations and publications
around the world. Recent honors and award reflect our services team's
dedications, technical expertise, professionalism and uncompromising commitment
to customer satisfaction.
Embedded NC532i Dual Port Flex-10
10GbE Multifunction Server Adapter and one (1) additional 10/100 server
adapter dedicated to iLO 2 management
Storage Controller
HP Embedded SATA Controller
Hard Drives
No drives included; (2) Non-Hot
Plug SSD internal drive bays
Internal Storage
Up to 128GB SATA SSD
Optical Drive
None
Form Factor
Up to eight (8) half-height
blades supported in the HP BladeSystem c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000
Enclosure
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above.
Configure-to-order servers must start with a CTO Chassis. NOTE: FIO indicates that this option is a factory installable option.
Step
1: Base Server Blade Configuration
HP
Models
HP ProLiant BL495c
G5 Configure-to-order Blade
454314-B21
Configurable Model
ships with:
Embedded NC532i Dual
Port Flex-10 10GbE Multifunction Server Adapter and one (1) additional 10/100
server adapter dedicated to iLO 2 management
HP Embedded SATA
Controller
Two (2) non-hot plug
internal SATA SSD drive bays
HP Integrated Lights-Out
2 management processor
Step
2: Choose Required Options (one of the following from each list unless otherwise
noted):
HP
Processors
For single processor
configuration choose: NOTE: If two (2) processors are desired,
select one xxxxxx-B21 and one xxxxxx-B21.
HP 4GB (2x2GB) Single
Rank PC2-5300 (DDR2-667) Registered Low Power Memory Kit NOTE: Compatible with the AMD Opteron
processor Models 2347 HE, 2352, and 2356.
HP 8GB (2x4GB) Dual
Rank PC2-5300 (DDR2-667) Registered Low Power Memory Kit NOTE: Compatible with the AMD Opteron
processor Models 2347 HE, 2352, and 2356.
NOTE:
Must be installed in pairs. NOTE: The memory bus will operate at 800 MHz with four (4) or fewer
DIMMs per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz
with eight (8) DIMMs per processor.
Step
3: Choose Additional Options for Factory Integration
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved.
HP Ethernet Mezzanine
Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port
1Gb Server Adapter for c-Class BladeSystem NOTE: If the NC325m is installed
in mezzanine slot 1 of a half-height server, connectivity will be provided
on only 2 of the 4 ports.
416585-B21
HP NC326m PCI Express Dual Port
1Gb Server Adapter for c-Class BladeSystem
406771-B21
HP NC360m Dual Port 1GbE BL-c
Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c
Adapter NOTE: If the NC364m is installed
in mezzanine slot 1 of a half-height server, connectivity will be provided
on only 2 of the 4 ports.
447883-B21
HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
453246-B21
QLogic iSCSI Dual Port Adapter
with Virtual Connect for c-Class BladeSystem
488074-B22
NOTE: The Gigabit
Ethernet adapters above transmit from the server at 2000 Mbps, full duplex
per port. For more information, see the "Network Controller" segment
in the Standards Features section.
10 Gigabit Ethernet Mezzanines
HP NC522m Dual Port Flex-10 10GbE
Multifunction BL-c Adapter NOTE: The NC522m requires a minimum
of 2 GB of server memory. NOTE: The NC522m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
467801-B21
HP NC532m Dual Port Flex-10 10GbE
Multifunction BL-c Adapter
467799-B21
NOTE: The NC532m
network adapter card is required for each server blade connecting to a 10Gb
interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP
BladeSystem c3000 Enclosure). NOTE: The NC532m requires a minimum of 2 GB of server memory. NOTE: The NC532m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
HP NC550m 10GbE 2-port PCIe x8
Flex-10 Ethernet Adapter NOTE: The NC550m network adapter
card is required for each server blade connecting to a 10Gb interconnect
in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 3-4 (HP BladeSystem
c3000 Enclosure). NOTE: The NC550m requires a minimum of 2 GB of server memory. NOTE: The NC550m supports linking at 1000Mbps or 10000Mbps when not
connected to a Flex-10 device. The NC550m will only support 1000Mbps when
connected to a 1Gb Ethernet interconnect.
581204-B21
HP Fibre Channel
Mezzanine Options
4Gb Fibre Channel Mezzanines
Emulex LPe1105 4Gb Fibre Channel
Host Bus Adapter for c-Class BladeSystem
HP 4GB (2x2GB) Single Rank PC2-5300
(DDR2-667) Registered Low Power Memory Kit NOTE: Compatible with the AMD Opteron
processor Models 2347 HE, 2352, and 2356.
HP 8GB (2x4GB) Dual Rank PC2-5300
(DDR2-667) Registered Low Power Memory Kit NOTE: Compatible with the AMD Opteron
processor Models 2347 HE, 2352, and 2356.
NOTE: Must be
installed in pairs. NOTE: The memory bus will operate at 800 MHz with four (4) or fewer
DIMMs per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz
with eight (8) DIMMs per processor.
BL495c G5 Hard Drives
NOTE: Drives have
either a one year or three year warranty; refer to the specific drive QuickSpecs
for details.
HP 32GB 1.5G SATA SFF (2.5-inch)
Non-hot Plug Entry 3yr Warranty Solid State Drive
461201-B21
HP 64GB 1.5G SATA SFF (2.5-inch)
Non-hot Plug Entry 3yr Warranty Solid State Drive
HP Insight Software
Media Kit NOTE: Insight Software DVD media
without licenses. Contains Insight Control, Insight Dynamics and Virtual
Connect Enterprise Manager. Uses an integrated installer to perform quick
and accurate software installation and updates.
436222-B21
NOTE:
Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support &
Update Service. NOTE: For additional license kits, including bundles with HP BladeSystem
enclosures, please see the Insight Control QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Insight Control
for Linux
HP Insight Control
for Linux, 1-server license, including one year of 24x7 Technical Support
and Updates, Electronic
TC213AAE
HP Insight Control
for Linux, No Media, 1-Server license, including one year of 24x7 Technical
Support and Updates
TC209A
HP Insight Control
for Linux, Media pack (DVD) - No licenses included NOTE: Media pack DVD contains HP
Insight Control for Linux, HP Systems Insight Manager, HP Insight Control
power management, HP Insight Control virtual machine management, and an
integrated installer. Licenses must be acquired separately.
TC208A
NOTE:
Licenses ship without media. The Media Kit for Insight Control for Linux
can be ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button). NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and are available in all countries except
China and Japan. Customers in China and Japan should order the physical
equivalent. NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
HP Integrated Lights-Out
(iLO) Advanced for BladeSystem Remote Management
HP Integrated Lights-Out
(iLO) Advanced for BladeSystem (1) Server License/(1) Key for BladeSystem,
No Media, including 1 year of 24x7 Technical Support and Updates.
512488-B21
NOTE:
Electronic licenses can be used to purchase multiple licenses with a single
activation key, and is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits please see the HP Integrated Lights-Out
2 (iLO 2) QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_div/12362_div.html
HP Insight Control
server deployment
HP Insight Control
server deployment Electronic License including 1 year 24x7 Technical Support
and Updates
T9082AAE
HP Insight Control
server deployment 1-Server License including 1 year 24x7 Technical Support
and Updates
452151-B21
NOTE:
Licenses ship without media. The Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key, and is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service. NOTE: For additional license kits please see the Insight Control
QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12631_div/12631_div.html
HP Storage Controllers
HP Cluster Management Utility
Compute Node License NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one node (server). Customer will receive a printed
end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key. NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
436284-B21
HP Cluster Management Utility
Media and Management License NOTE: Order a minimum of one license
per cluster to purchase media including software and documentation, which
will be delivered to the customer, and also licenses CMU management. No
license key is delivered or required. NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/12612_div/12612_div.html
433257-B21
HP HPC Linux Value Pack One Processor
License NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one socket (a.k.a. processor). Customer will receive
a printed end user license agreement and license entitlement certificate
via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key. NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
TC293A
HP HPC Linux Value Pack Media NOTE: This part number can be used
to purchase media including software and documentation, which will be delivered
to the customer. NOTE: For additional license kits please see the QuickSpecs at: http://h18004.www1.hp.com/products/quickspecs/13485_div/13485_div.html
TC294A
HP Storage Controllers
Smart Array P700m Controller
HP Smart Array P700m/512 4-ports
Ext PCIe x8 SAS Controller
HP 650 mAh P-series Low Profile
Battery NOTE: The HP 650 mAh P-Series battery
option kit is required to enable battery-backed write cache (BBWC) on the
P712m Controller.
575031-B21
HP Smart Array P-Series Low Profile
Battery NOTE: The Smart Array P-Series battery
option kit is required to enable battery-backed write cache (BBWC) on the
P700m Controller.
HP PCI Expansion Blade NOTE: Ships with one pre-installed
PCI-X connect board. Also includes one PCIe connect board which requires
installation. NOTE: Please see the QuickSpecs for Technical Specifications and
additional information at: http://h18000.www1.hp.com/products/quickspecs/12753_div/12753_div.html
448018-B21
HP USB and SD Options
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver)
HP 2GB USB Flash Media Drive Key
Kit NOTE: HP qualified blank USB key
for use with HP ProLiant servers that support the VMware virtualization
environment and other HP value-add software like SmartStart. HP recommends
this industry standard USB flash device for use with VMware ESXi. USB device
must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
608447-B21
HP Care Pack Services
NOTE: The HP Care
Pack service part numbers below for ProLiant BL c-Class server blades, cover
the server blade and all HP branded hardware options qualified for the server,
purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic
UK065E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic
UK066E
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models".
DIMM
installation guidelines:
All DIMMs must be PC2-5300 Registered DDR2 DIMMs (667 MHz) or PC2-6400
Registered DDR2 DIMMs (800 MHz).
PC2-6400 DDR2 DIMMs are only supported with the AMD Opteron processor
Models 2376 HE, 2378, 2381 HE, 2382, 2384, 2387, 2389, 2425 HE, 2427,
and 2435.
Both DIMM slots in a memory bank must be populated.
Both DIMMs in a memory bank must be identical.
Processor 1 memory bank A must always be populated.
DIMM banks are active only when the corresponding processor socket
is populated.
If installing only one bank on a processor, populate the bank physically
farthest from the processor.
If mixing DIMM sizes on the same processor, the largest capacity DIMMs
must be populated in the bank physically farthest from the processor.
The smallest capacity DIMMs must be populated in the bank physically
nearest the processor.
For optimal performance in most applications, populate the first memory
bank for every populated processor socket.
The memory bus will operate at 800 MHz with four (4) or fewer DIMMs
per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz
with eight (8) DIMMs per processor.
HP
ProLiant BL495c G5 Server Blade
Standard Memory
4096 MB (2 x 2048 MB) of PC2-5300 or PC2-6400, Registered DDR2 ECC DIMMs.
Standard Memory Plus Optional Memory
Up to 118784 MB of PC2-5300 or 61440 MB of PC2-6400, Registered DDR2 ECC DIMMs.
Memory is available with the installation of optional PC2-5300 or PC2-6400, Registered
DDR2 DIMM memory expansion kits.
Standard Memory
Replaced with Optional Memory Up to 131072 MB of PC2-5300 or 65536
MB of PC2-6400, Registered DDR2 ECC DIMMs. Memory is available with the removal
of standard memory and the installation of optional PC2-5300 or PC2-6400, Registered
DDR2 DIMM memory expansion kits.
1 Processor Configurations
Memory
Slot
1A
2A
3B
4B
5C
6C
7D
8D
Standard
4096 MB
2048 MB
2048 MB
Empty
Empty
Empty
Empty
Empty
Empty
Optional
53248 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
2048 MB
2048 MB
Maximum
65536 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
2 Processor Configuration, Total
Memory = 60GB
Memory
Slot
1A
2A
3B
4B
5C
6C
7D
8D
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
2048 MB
2048 MB
9E
10E
11F
12F
13G
14G
15H
16H
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
2 Processor Configuration, Total
Memory = 64GB
Memory
Slot
1A
2A
3B
4B
5C
6C
7D
8D
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
9E
10E
11F
12F
13G
14G
15H
16H
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
4096 MB
2 Processor Configuration, Total
Memory = 116GB
Memory
Slot
1A
2A
3B
4B
5C
6C
7D
8D
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
2048MB
2048MB
9E
10E
11F
12F
13G
14G
15H
16H
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
8192 MB
2 Processor Configuration, Total
Memory = 128GB
Memory
Slot
1A
2A
3B
4B
5C
6C
7D
8D
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
9E
10E
11F
12F
13G
14G
15H
16H
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
8192MB
HP Memory
Following are memory options available
from HP:
HP 2GB (2x1GB) Single Rank PC2-6400
(DDR2-800) Registered Memory Kit NOTE: Compatible with the AMD Opteron
processor Models 2376 HE, 2378, 2381 HE, 2382, 2384, 2387, 2389, 2425 HE,
2427, and 2435.
HP 4GB (2x2GB) Single Rank PC2-5300
(DDR2-667) Registered Low Power Memory Kit NOTE: Compatible with the AMD Opteron
processor Models 2347 HE, 2352, and 2356.
HP 8GB (2x4GB) Dual Rank PC2-5300
(DDR2-667) Registered Low Power Memory Kit NOTE: Compatible with the AMD Opteron
processor Models 2347 HE, 2352, and 2356.
NOTE: Must be
installed in pairs. NOTE: DIMMs must be installed in decreasing capacity with the largest
DIMMs installed in the banks furthest away from each processor. NOTE: The memory bus will operate at 800 MHz with four (4) or fewer
DIMMs per processor, 667 MHz with six (6) DIMMs per processor, and 533 MHz
with eight (8) DIMMs per processor.
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault
or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative
Humidity (non-condensing)
Operating
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Non-operating
Maximum
allowable altitude change rate is 457 m/min (1500 ft/min).
Embedded NC532i Dual
Port Flex-10 10GbE Multifunction Server Adapter
Type
Integrated dual-port
KR 10GbE
Network
Processor
Broadcom 57711
Data Transfer Method
x8 PCI Express 1.0
Network
Transfer Rate
Two ports, each at 20 Gbps full
duplex; 40 Gbps aggregate full duplex theoretical bandwidth NOTE: Each port is autosensing 1
Gb / 10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect
components. NOTE: Each port on the NC532i adapter transmits from the server at
only 20 Gbps (theoretical) full duplex.
IEEE Compliance
802.1p QoS,
802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap 10GBase-KR, and 802.3x
flow control
Standard
Features
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
4K Jumbo frames
Microsoft Windows Receive Side Scaling (RSS)
Optional accelerated iSCSI
HP Integrated Lights-Out
2 (iLO 2)
integrated on system board
Architecture
32-bit PCI-based health and remote
management ASIC
Processor
32-bit RISC processor core running
at 66MHz
Upgradeability
Option firmware upgradeable via
Flash ROM
Operating System Support
Microsoft Windows Server 2008 Standard
Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise
Edition (32bit and 64bit)
Microsoft Windows Server 2003 and
Windows Server 2003 R2, and Windows Server 2003 for Extended Systems Standard
Edition, Enterprise Edition
Red Hat Enterprise Linux 5.4 (32bit
and 64bit)
SUSE LINUX Enterprise Server 11
(32bit and 64bit)
SUSE LINUX Enterprise Server 10
(32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Microsoft Windows XP Professional
Edition
Microsoft Windows Vista Business
and Ultimate Editions
Red Hat Enterprise Linux Desktop
5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows
and Linux systems)
Firefox 3.0 (on supported Windows
and Linux systems)
Command Line Support
Telnet, Secure Shell and serial
port access
Secure Socket Layer
Secure Shell version 2 (Password
and certificate)
Security
Advanced Encryption Standard (AES)
and Triple Data Encryption Standard (3DES) on browser, CLP and XML scripting
interface
SNMP 2, IPMI 2.0 (KCS interface),
DMTF Server Management Command Line Protocol Specification
(SM CLP), DMTF Web Services Management
Specification (WS Management)
Environment-friendly Products and
Approach
End-of-life Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.