• Support for HP NC553m 10Gb 2-port FlexFabric Converged Network Adapter
  
• Support for HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low Power Memory Kit
  
• Support for Intel Xeon X5675, X5672, E5649, and E5645 Processors

This document covers the HP ProLiant BL280c G6 server blade only. For more information on HP BladeSystem c-Class Enclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:

HP BladeSystem c3000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html

HP BladeSystem c7000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html

HP BladeSystem c-Class Interconnect and Mezzanine Components:
https://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
https://h18004.www1.hp.com/products/blades/components/c-class-adapters.html

HP ProLiant BL280c G6 server blade includes:

• Processor:
  • Up to two (2) Intel® Xeon® 5600 or 5500 series processors
  • Intel® 5500 chipset
• BL280c G6 Memory:
  • Twelve (12) DIMM slots
  • Up to 192GB memory with PC3-10600 (DDR3) Registered (RDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12 slots.
  • Up to 48GB, using PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at 2 DIMMs per Channel in 12 slots
  • 1333MHz available when fully populated 2 DIMMs per Channel with ROM update via ROM Based Setup Utility (RBSU).
• Internal Drive Support:
  • Up to two (2) small form factor (SFF) HP Solid State Drives (SSD) For ProLiant Server Blades
  • Up to two (2) small form factor (SFF) SATA or SAS Non-Hot Plug hard disk drives
• Storage Controller:
  • HP Embedded SATA RAID Controller
    NOTE: This is a chip set SATA RAID controller. It supports RAID 0 and 1 only and no Battery Backed Write Cache. User needs to enable the RAID option through HP RBSU (ROM Base Setup Utility) first before the RAID can be activated. Users also need to download the OS driver from the https://www.hp.com/support/BL280cG6 website for OS Array Monitoring.
• Network Controller:
  • One (1) HP Integrated NC362i Dual Port Gigabit Server Adapter
  • Additional Ethernet adapter ports available via the mezzanine expansion slot
  • One (1) additional 10/100 network adapter dedicated to iLO 2 Management
• Mezzanine Support:
  • Two (2) I/O expansion mezzanine slots
  • Supports up to two (2) additional mezzanine cards of your choice:
    • Dual-Port FlexFabric Adapter mezzanine options
      
    • Dual-Port Fibre Channel Mezzanine (4-Gb or 8-Gb) options for SAN connectivity
      
    • Ethernet server adapter mezzanine options for additional network ports
      
    • InfiniBand (IB) Mezzanine options for low latency and high bandwidth server interconnectivity
      
    • I/O Accelerator mezzanine options for high transaction rate local storage
      
    • SAS mezzanine option for external direct attach and shared SAS storage
      
• Internal USB Support:
  • One (1) internal USB 2.0 connector for security key devices and USB drive keys
  • One (1) internal SD-HC card slot
• Security - Trusted Platform Module:
  • One (1) internal TPM 1.2 module connector
• Form Factor:
  • HP ProLiant BL280c is a half-height server blade that plugs into the BladeSystem c3000 and c7000 enclosures
    • 16 blades per c7000 (10u) enclosure
    • 8 blades per c3000 (6U) enclosure
• Infrastructure Management:
  • This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades Firmware Maintenance website at: https://h18004.www1.hp.com/products/blades/components/c-class-compmatrix.html
  • Convenient slide-out Systems Insight Display for quick and easy front view server diagnostics, along with status LEDs, Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU)
  • HP Integrated Lights-Out 2 (iLO 2) management processor for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.
  • HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
  • HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements.
• Operating Systems:
  • Supports Windows, Linux, VMware, Solaris, and Citrix XenServer
• Enclosures:
  • HP offers three different c-Class server blade enclosures to meet your individual needs:
    • The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 16 ProLiant BL280c G6 servers plugged vertically.
    • The HP BladeSystem c3000 rack enclosure is 6U high and holds up to 8 HP ProLiant BL280c G6 servers plugged horizontally.
  • Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
  • For additional enclosure information, please see: https://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and parts replacement is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
    NOTE: Server Warranty includes 3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support. Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.

Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL280c G6. Both mezzanine circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available via option kits and must be ordered separately.

Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403621-B21)

• Based on the same field-proven ASIC, firmware, and driver technology as Emulex's renowned LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex HBAs

Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 456972-B21)

• Exceptional performance, enhanced security, and scalable management for virtual server and enterprise-class applications

QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 403619-B21)

• Uses common drivers which means that customers can standardize on one QLogic driver whether they are using the QMH2462 or other 4Gb and 2Gb HBAs powered by QLogic

QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (PN 451871-B21)

• Provides a first step into the 8Gb future, advanced, embedded support for virtualized environments and reduced power consumption

HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter (PN 590647-B21)

• Application oriented Quality of Service (AQoS) providing the ability to configure, prioritize, and optimize traffic flows from virtual machines and/or applications to the target port

Brocade, Emulex and QLogic Fibre Channel HBAs feature:

• Optimal performance utilizing PCI Express
• 4/2/1Gb/s auto negotiating speeds (4 Gb HBAs)
• 8/4/2Gb/s auto negotiating speeds (8 Gb HBAs)
• Dual-ports for redundant path connections
• Up to two FC HBAs per server blade providing redundant FC HBA support
• Optimized for HP StorageWorks and supported by third party SAN vendors
• Support for Microsoft® Windows® and Linux operating systems environments

HP ProLiant BL280c G6 server blades are optimized for HP StorageWorks MSA, EVA and XP

HP ProLiant BL280c G6 server blades are compatible with select 3rd party SANs Please see blade storage page for more details: https://h18004.www1.hp.com/products/blades/components/c-class-sans.html

Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecycle. This provides the customer with higher levels of operational efficiency and highly reliable systems: https://www.hp.com/go/foundation.

The foundation pack includes:

• HP SmartStart
• HP Management DVD
• HP ProLiant Smart Update Firmware DVD
• SmartStart version supported (minimum): SmartStart 8.20.
  https://www.hp.com/servers/smartstart

NOTE: In an effort to support reducing our environmental impact, the HP Insight Foundation Suite for ProLiant media will be available as a selectable option for this server at time of order of a Factory Integrated Model. This will allow customers to order the number of media kits that best meet their needs and eliminate receiving unnecessary duplicate media.

HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring, power and thermal control, and lights-out remote administration of ProLiant ML, DL, and BL servers. HP iLO functions without additional software and can be accessed from any location via a web browser. HP iLO Advanced can be purchased as a stand-alone product but also comes included with the purchase of HP Insight Control. HP iLO works hand-in-hand with HP Systems Insight Manager, Insight Control suites, and Insight Dynamics for ProLiant, helping customers unleash the value of the ProLiant platform and deliver the highest possible quality of IT service. For more information, visit: www.hp.com/go/iLO

HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.

Two versions of Insight Control are available, to serve environments requiring either a Linux-based or a Windows-based central management server: HP Insight Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol

HP Insight Control includes one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: https://www.hp.com/services/insight.

HP Insight Dynamics for ProLiant, a product option, is advanced infrastructure management software that enables IT staff to instantly adjust their environments to meet dynamic business demands by provisioning, optimizing and protecting complex infrastructure in minutes. It's a powerful toolkit, integrated-by-design, that accelerates complex technology projects and simplifies daily operations, transforming data center economics. With Insight Dynamics IT professionals can plan capacity and power continuously, balance workloads across physical and virtual resources, and ensure cost-effective high availability. It also enables IT organizations to provision infrastructure consistently and automatically from pools of shared resources using a self-service portal. Resources provisioned can range from a single virtual machine to complex multi-tier environments and their associated physical and virtual resource requirements. In addition to the previous functional benefits, it also provides a cost-effective disaster recovery for physical and virtual environments that works with HP StorageWorks Continuous Access software for both the Enterprise Virtual Array and the XP storage array allowing application environments to be reactivated in minutes with the touch of a button to a remote location.

NOTE: For more information, visit:
https://www.hp.com/go/insightdynamics

HP Cluster Platforms are specifically engineered, factory-integrated large-scale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and Novell SLES, as well as Microsoft Windows HPC Server. A Cluster Platform Configurator simplifies ordering. https://www.hp.com/go/clusters

High Performance Computing (HPC) interconnect technologies are available for this server as part of the HP Cluster Platform portfolio. These high-speed InfiniBand and Gigabit interconnects are fully supported by HP when integrated within an HP cluster. Flexible, validated solutions can be defined with the help of configuration tools. https://www.hp.com/techservers/clusters/ucp/index.html

HP Cluster Management Utility (CMU) is an HP-licensed and HP-supported suite of tools that are used to manage large-scale Linux ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of clusters user friendly, efficient, and effective. https://www.hp.com/go/cmu

HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported specially priced software bundle for the development and deployment of applications on HPC Cluster Platforms. Value Pack includes the Platform LSF workload scheduler, the HP-MPI parallelization library, the HP Unified Parallel C compiler and the HP Shmem library, as well as the execution environments for the libraries and compiler. HP HPC Linux Value Pack

Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris
VMware
Citrix XenServer

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server including, how to purchase from HP, please visit our OS Support Site at: https://www.hp.com/go/supportos and our driver download page https://www.hp.com/support/BL280cG6

• Dual port Fibre Channel Mezzanine card for redundant SAN connection
• Advanced ECC memory - can correct a multi-bit error (up to 4 bits) that occurs within one memory chip
• Support for Memory Mirroring and Memory Lock-Step Mode
• Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing

ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support

• One (1) internal USB 2.0 connector for security key devices and USB drive keys
• Power-on password
• Administrator's password
• Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
• Integrated Lights-Out 2 can be disabled via a Global Setting

HP Care Pack Services: Packaged server and storage services for increased uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a good time to think about what levels of support you may need. Our portfolio of service options reduce deployment and management worries while helping you get the most out of your server and storage investments. We take a holistic approach to your environment, bridging servers, blades, storage, software and network infrastructures with our packaged HP Care Pack Services for servers and storage.

Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have matured along with technology. Good news that can also create problems stemming from depending on standard warranties designed to only protect against product defects and some downtime causes. Using a standard approach to warranty uplifts, such as HP Care Pack Services, helps reduce downtime risks and provides operational consistency for mission-critical and standard business computing.

HP Care Pack Services: Upgrading or extending standard server and storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software support services suite sold separately, or combined with our Support Plus and Support Plus 24 services. The portfolio also provides a combination of integrated proactive and reactive services, such as Proactive 24 Service and Critical Service. In addition with HP Proactive Select, you can acquire the specific proactive constancy and technical services. HP Proactive Select menu offers a broad set of service options that you can mix and match depending on your specific requirements. Proactive service options include offers for server, storage, network, SAN device, software, environment and education services.

HP server and storage lifecycle support services offers a full spectrum of customer care-from technology support to complex migrations to complete managed services. HP Factory Express provides customization, integration and deployment services for turnkey solutions. HP Education Services offer flexible, comprehensive training on to help your IT staff get the most out of your server and storage investments. HP Financial solutions extend innovative financing and cost-effective asset management programs-from purchase to equipment retirement.

Learn more: www.hp.com/services/servers and www.hp.com/services/storage

NOTE: Care Pack Services availability may vary by product and country.

HP Care Pack Services are sold by HP and HP Authorized Service Partners:

• Services for customers purchasing from HP or an enterprise reseller are quoted using HP order configuration tools.
• Customers purchasing from a commercial reseller can find HP Care Pack Services at https://www.hp.com/go/lookuptool

3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6- or 24-hour
Provides your IT manager with a team of support specialists who will quickly begin troubleshooting the system to help return the hardware to operating condition within 6 or 24 hours of the initial service request to the HP Global Solution Center.

HP is committed to repairing your hardware within a maximum of six or twenty four hours. The benefits include:

• Improved system uptime
• Predictable repair times
• More effective IT resource planning
• Consistent level of hardware support across your multi-technology systems

https://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN

3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
Provides you with rapid remote support and if required an HP authorized representative who will arrive on site any time and day of the year to begin hardware maintenance service within 4 hours of the service request being logged.

This service provides a trained HP service specialist to perform an installation that meets HP quality standards, for:

• Help improve or maintain system uptime
• Convenient onsite support
• Committed response time

https://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE

HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking options to assist you in bringing your new hardware into operation in a timely and professional manner.

• Expedited installation, with all service prerequisites met before the installation is performed
• Installation in accordance with manufacturer's specifications, enhancing the supportability of your HP-installed hardware and software
• Service delivery at a mutually scheduled time
• Allows your IT resources to stay focused on their core tasks and priorities
• Availability of an HP service specialist to answer questions during the onsite delivery of this service

https://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN

HP Enhanced Network Installation & Startup for BladeSystem Switches
Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate proper implementation of network protocols and access to advanced features.

https://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW

3-Year HP Proactive 24
As an alternative to our recommended support level, for customers who want enhanced operational effectiveness and proactive problem identification:

Provides improved stability, availability and operational effectiveness with an integrated hardware and software support service that combines industry-leading reactive technical assistance with proactive account services, giving your IT manage support from a team of service specialists.

https://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-1614ENUC

HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services and education courses

Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy Proactive Select Service Credits when you purchase your hardware and then use the credits over the next 12 months.

https://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN

HP eSupport is a portfolio of technology-based services that assist you with managing your business environment - from the desktop to the data center.

Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to manage the daily operations of your IT environment.

Features include:

• Access to self-solve tools (including search technical knowledge base)
• Efficient logging and tracking of support cases
• Collaboration with other business and IT professionals
• Download of patches and drivers
• Access to diagnostic tools
• Proactive notification of relevant information

Access to certain features of the support portal requires an HP service agreement. To access the support portal, visit: https://www.hp.com/support

HP Insight Remote Support software delivers secure remote support for your HP Servers and Storage, 24 X 7, so you can spend less time solving problems and more time focused on your business. You can have your systems remotely monitored for hardware failure using secure technology that's been proven at thousands of companies around the world. In many cases, you can avoid problems before they occur.

In today's cost-conscious business environment, IT professionals, developers, consultants and users face an interesting challenge: how to keep up with the latest technologies and expand important skills while delivering profitable results on current projects. To help address this challenge, HP offers innovative training solutions that help keep you up-to-date on virtualization, server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related topics-while spending less time away from business-critical activities.

HP Technology Services continues to be recognized for service and support excellence by customers, partners, industry organizations and publications around the world. Recent honors and award reflect our services team's dedications, technical expertise, professionalism and uncompromising commitment to customer satisfaction.

To learn more on HP ProLiant servers, HP BladeSystem servers and HP StorageWorks storage products, please contact your HP sales representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/proliant or www.hp.com/services/bladesystem or https://www.hp.com/hps/storage

HP BL280c G6 E5649 6G 1P Svr
632693-B21

HP BL280c G6 X5650 6G 1P
598129-B21

HP BL280c G6 X5550 2G 1P
531350-B21

HP BL280c G6 E5540 2G 1P
507787-B21

HP BL280c G6 E5520 2G 1P
507786-B21

HP BL280c G6 E5630 4G (1P)
598130-B21

HP BL280c G6 E5506 2G (1P)
598132-B21

HP BL280c G6 E5502 2G 1P
507788-B21

HP BL280c G6 L5640 4G (1P)
598131-B21

HP BL280c G6 L5520 LP2G 1P
507785-B21

(1) Intel® Xeon® Processor X5650 (2.66 GHz, 12 MB, 95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)
(1) Intel® Xeon® Processor X5550 (2.66 GHz, 8 MB, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
(1) Intel® Xeon® Processor E5649 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1333, HT, Turbo1/1/1/1/2/2)
(1) Intel® Xeon® Processor E5540 (2.53 GHz, 8 MB, 80W, HT, Turbo 1/1/2/2)
(1) Intel® Xeon® Processor E5520 (2.26 GHz, 8 MB, 80W, HT, Turbo 1/1/2/2)
(1) Intel® Xeon® Processor E5630 (2.53 GHz, 12 MB, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
(1) Intel® Xeon® Processor E5506 (2.13 GHz, 4 MB, 80W, DDR3-800)
(1) Intel® Xeon® Processor E5502 (1.86 GHz, 4 MB, 80W, DDR3-800)
(1) Intel® Xeon® Processor L5640 (2.26 GHz, 12 MB, 60W, DDR3-1333, HT, Turbo 2/2/3/3/4/4)
(1) Intel® Xeon® Processor L5520 (2.26 GHz, 8 MB, 60W, DDR3-1066, HT, Turbo 1/1/2/2)

Basic memory slot and population diagram

• Population order; start with "A" first, "B" second, "C" third, etc.

Standard memory configuration (1 CPU model)

• 2GB (1 x 2GB) of PC3-10600 (DDR3-1333) ECC RDIMMs

Standard Memory Plus Optional Memory (1 CPU model)

• 82GB
  • 1x 2GB dual-rank PC3-10600 RDIMMs
  • 5x 16GB quad-rank PC3-10600 or PC3-8500 RDIMMs

Standard Memory Replaced with Optional Memory (1 CPU model)

• 96GB, consisting of six (6) 16GB quad-rank PC3-10600 RDIMMs

UDIMM maximum configuration (1CPU model)

• 24GB, consisting of six (6) 2GB dual-rank PC3-10600 UDIMMs

Standard Memory Replaced with Optional Memory (2 CPU Model)
RDIMM maximum configuration

• 192GB, consisting of twelve (12) 16GB quad-rank PC3-10600 RDIMMs

UDIMM maximum configuration (2 CPU model)

• 48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs

For power specifications including Input Requirements, BTU Rating, and Power Supply Output, please see the HP BladeSystem c-Class Enclosure QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html

To review typical system power ratings use the HP BladeSystem Power Sizer which is available via the online tool located at URL: https://www.hp.com/go/bladesystem/powercalculator

System Inlet Temperature

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed.

System performance may be reduced if operating with a fan fault or above 30°C (86°F).

For acoustic noise specifications, please see the HP BladeSystem c-Class Enclosures QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
https://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html

• 9K jumbo frames
• TCP/IP checksum offload (TCO)
• Large send offload (LSO)
• Interrupt coalescence
• Dual address cycles (DAC)
• Wake-on-LAN (WOL)
• Pre-boot execution environment (PXE)
• ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and Switch-Assisted Load Balancing
• IPv6 packet transmit and receive (excluding all offload capabilities); IPv6 aware SNMPv1 agents for Windows

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.