Standard

Optional

Standard

Optional

Standard

Optional

Standard

Optional

Following are memory options available from HP:

8 GB (2 x 4 GB 2RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit

4 GB (2 x 2 GB 2RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit

4 GB (2 x 2 GB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit

2 GB (2 x 1 GB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit

1 GB (2 x 512 MB 1RANK) PC2-3200 Registered Memory (DDR2-400) Option Kit

ML570G4 Hot-plug Memory Expansion Board

146GB 3G SAS 10K SP
146GB 3G SAS 10K DP
72GB 3G SAS 10K SP
72GB 3G SAS 10K DP
72GB 3G SAS 15K SP
72GB 3G SAS 15K DP
36GB 3G SAS 15K SP
36GB 3G SAS 15K DP

HP Smart Array E500/256MB Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller

External Storage

Modular Smart Array 30 Family

Up to 28

External

Maximum Storage Capacity - (ML570 SFF SAS Drive Cage, 8 port SAS controller in 4 slots & MSA50 enclosures)

Internal

Position
Supported

HP StorageWorks D2D Backup Systems
D2D110
D2D120
D2D130

Efficiency (%)

Power Factor

Leakage Current (mA)

Maximum Inrush Current (A peak)

Maximum Inrush Current duration (mS)

https://h30099.www3.hp.com/configurator/calc/Power%
20Calculator%20Catalog.xls

- Click on the system of interest. Example: ML570 G4
- Follow the instructions of the next screens.

Integrated Lights-Out 2 Standard (integrated on system board)

Smart Array P400 Controller

HP ProLiant ML570 G4 High Performance Models

ML570R04 X7140M, 4GB (2P)
430056-001
ML570R04 X7130M, 4GB (2P)
430054-001

HP ML570 G4 Base Models

ML570R04 X7120M, 2GB (1P)
430046-001
ML570R04 X7110M, 2GB (1P)
430369-001
ML570T04 X7140M, 2GB (1P)
430057-001
ML570T04 X7130M, 2GB (1P)
430055-001
ML570T04 X7120M, 2GB (1P)
430050-001
ML570T04 X7110M, 2GB (1P)
430372-001

NOTE: The HP ProLiant ML570 G4 Server can support up to three x4-x8 PCI Express bus expander cards. The card can only be installed in expansion slots 6, 8, and 10.

HP Insight Control Environment delivers foundation management, including remote monitoring, hardware resource deployment, health monitoring, software version control, performance monitoring, vulnerability scanning and patch management, and power management.

HP Insight Control Environment installs and licenses the following components by default using a wizard-based integrated installer:

• HP Systems Insight Manager
• HP iLO Advanced Pack
• HP Rapid Deployment Pack
• HP Insight Power Manager
• HP Performance Management Pack
• HP Vulnerability and Patch Management Pack

Additional ProLiant Essentials software and management tools included on the Insight Control Management kit can be installed manually

• HP Server Migration Pack - Universal Edition
• HP Open Service Event Manager
• HP Instant Support Enterprise Edition

NOTE: Server Migration Pack - Universal Edition can be installed from the SMP Universal CD included in the Insight Control Management media kit.
NOTE: For additional product and licensing information about HP Insight Control Environment, visit: https://www.hp.com/go/ice.

HP Insight Control management suites and most HP ProLiant Essentials include a one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: https://www.hp.com/services/insight.

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. SMP Universal automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal allows all of the following migrations:

• physical to ProLiant
• physical to virtual
• virtual to virtual
• virtual to ProLiant

NOTE: For more information, visit: https://www.hp.com/go/migrate.

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials Rapid Deployment Pack

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at https://www.hp.com/servers/manage.

• Advanced ECC (1 or More Memory Boards)
  Advanced ECC Memory is the default memory protection mode for the HP ProLiant ML570 G4. In Advanced ECC, the server is protected against correctable memory errors. The server will provide notification if the level of correctable errors exceeds a predefined threshold rate. The server does not fail because of correctable memory errors.
  Advanced ECC provides additional protection over Standard ECC in that it is possible to correct certain memory errors that would otherwise be uncorrectable and result in server failure. Whereas Standard ECC can correct single-bit memory errors, Advanced ECC can correct single-bit and multi-bit memory errors if all failed bits are on the same DRAM device on the DIMM. Advanced ECC is the only mode in which hot-add operations are supported by adding a memory board with memory to the server while it is running.
  
• Online Spare Memory (1 or More Memory Boards)
  Offers a higher level of memory protection than Advanced ECC alone. If the number of single-bit correctable errors on a bank exceeds the pre-defined error threshold, that bank will fail over to the online spare bank without intervention or server interruption. The failed memory can then be replaced at the user's convenience during a scheduled maintenance window. Online Spare Memory is achieved by protecting active memory with online spare memory on the same memory board. No operating system support is required.
  
• Hot Plug Mirrored Memory (2 or 4 Memory Boards)
  Hot Plug Mirrored Memory provides a higher level of availability than Advanced ECC and Online Spare Memory. With Hot Plug Mirrored Memory, the server is protected against uncorrectable memory errors that would otherwise result in server failure. Hot Plug Mirrored Memory allows the server to keep two copies of all memory data on separate memory boards. If an uncorrectable error is encountered, the proper data is retrieved from the memory board that did not fail. In addition, Hot Plug Mirrored Memory allows failed or degraded DIMMs to be replaced while the server is running without requiring server downtime. The memory board with the failed DIMMs can be removed from the front of the server, failed DIMMs replaced, and the board re-inserted into the server without disengaging the server from the rack or interrupting the operating system.
  
• Hot Plug RAID Memory (4 Memory Boards)
  Hot Plug RAID Memory provides a similar level of protection as Hot Plug Mirrored Memory but obtains this protection using a smaller percentage of the installed memory. While Hot Plug Mirrored Memory keeps two copies of all memory data, Hot Plug RAID Memory keeps only one copy of all memory data and additional parity information. If an uncorrectable memory error is encountered, the server can create the proper data using data from the parity information and the other memory boards that contain no failures. In a Hot Plug RAID Memory configuration, 75% of the installed memory is available to the Operating System; 50% more than in a Hot Plug Mirrored Configuration. As with Hot Plug Mirrored Memory, Hot Plug RAID Memory allows failed DIMMs to be replaced while the server remains running and safely engaged in the rack.
  

Integrated Lights-Out (iLO 2) Management 2

• Virtual Text Remote Console (pre-OS only)
  
• Remote Serial Console
  
• Virtual Power Button Control
  
• Virtual Unit ID control
  
• Integrated Remote Console (ActiveX Control client)
  
• Dedicated & full function shared network connectivity with VLAN
  
• Embedded system health
  
• Present power consumption
  
• Browser, command line and scripted access
  
• Automatic IP Configuration via DHCP/DNS/WINS
  
• Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
  
• Advanced Encryption Standard (AES)/Triple Data Encryption Standard (3DES)
  
• OS independent hardware health status
  
• IML and iLO Event Logging
  
• Support for 12 user accounts with customizable access privilege

• -001
  
• Tower models ship with one local power cord
  
• Localized cables included with geographic specific models in other world regions

• -001
  
• Rack models all ship with one C19 to C14 jumper cable
  
• Localized cables included with geographic specific models in other world regions

Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

• Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
• Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server and purchased at the same time or afterward that are internal to the enclosure. This also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions, provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

• Support: 3 Year 4 Hour response 24x7 Same Business Day Coverage only
• Deployment Service: Installation and Start up only

Enhanced Service - optimize service level to increase IT performance and availability.

• Support: 3 Year Support Plus 24 only

Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://www.hp.com/go/proliant/carepack

Network Transfer Rate

Connector

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.