|
DL QuickSpecs
|
DL20
|
|
DL60
|
|
DL80
|
|
DL120
|
|
DL140
|
|
DL145
|
|
DL160
|
|
DL160se
|
|
DL165
|
|
DL180
|
|
DL185
|
|
DL320
|
|
DL325
|
|
DL345
|
|
DL360
|
|
DL365
|
|
DL380
|
|
DL385
|
|
DL388
|
|
DL560
|
|
DL580
|
|
DL585
|
|
DL740
|
|
DL760
|
|
DL785
|
|
DL1000
|
|
|
ML QuickSpecs
|
ML30
|
|
ML110
|
|
ML115
|
|
ML150
|
|
ML310
|
|
ML330
|
|
ML350
|
|
ML370
|
|
ML530
|
|
ML570
|
|
ML750
|
|
|
BL QuickSpecs
|
BL10e
|
|
BL20p
|
|
BL25p
|
|
BL260c
|
|
BL280c
|
|
BL2x220c
|
|
BL30p
|
|
BL35p
|
|
BL40p
|
|
BL420c
|
|
BL45p
|
|
BL460c
|
|
BL465c
|
|
BL480c
|
|
BL495c
|
|
BL60p
|
|
BL620c
|
|
BL660c
|
|
BL680c
|
|
BL685c
|
|
BL860c
|
|
|
SL QuickSpecs
|
SL160z
|
|
SL165z
|
|
SL170s
|
|
SL170z
|
|
SL230s
|
|
SL250s
|
|
SL270s
|
|
SL2x170z
|
|
SL335s
|
|
SL390s
|
|
SL4540
|
|
SL4545
|
|
|
XL QuickSpecs
|
XL170r
|
|
XL190r
|
|
XL220a
|
|
XL230a
|
|
XL730f
|
|
XL740f
|
|
XL750f
|
|
|
CL QuickSpecs
|
CL1850
|
CL1850 G1
| |
CL380
|
CL380 G1
| |
|
|
|
|
|
|
|
Proliant ML310 G2 QuickSpecs |
US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant ML310 G2 Overview
HP ProLiant ML310 Generation 2 (G2)
|
|
|
|
|
|
|
1. 48x IDE
(ATAPI) CD-ROM
|
5. Four DIMM Sockets, for up
to 4GB DDR memory |
2. Removable
Media Bays
|
6. System Fan |
3. Four
Hot-Plug (shown) or Four Non hot-plug (not shown) Drive Bays
|
7. 350W Power Supply |
4. Four Expansion Slots (Two
PCI-X, One PCI, and One PCI Express) |
|
|
At A Glance
- Supports a single 3.0 GHz,
3.20 GHz, or 3.40 GHz Intel® Pentium® 4 processor with 1MB or 2MB cache
size or a single 2.8 GHz Intel Celeron processor with 256KB cache size.
- Intel® Pentium® 4 processors include support for
Hyper-Threading
- Intel E7221 Chipset supporting 800MHz FSB (with Pentium
4 processor) or 533MHz FSB (with Celeron processor)
- PC3200 400MHz DDR SDRAM with advanced unbuffered
ECC capabilities and optional interleaving (expandable up to 4 GB)
- Embedded NC7761 PCI 10/100/1000T Gigabit network
adapter
- Four Expansion Slots: Two PCI-X 64-bit/100MHz, One
PCI 32-bit/33MHz slot, One PCI Express slot (X8 connector, x4 speed)
- SCSI models include
- Single Channel Ultra320 SCSI Adapter in PCI-X
slot
- SATA models include
- Integrated four Channel SATA Controller
- Four USB 2.0 ports - Two on front, two on rear
- ROM Based Setup Utility (RBSU) and PXE support
- Protected by HP Services including a one-year, Next
Business Day limited global warranty - Certain restrictions and exclusions
apply.
|
Standard Features
Processor
One of
the following |
Intel Pentium 4 - 3.4
GHz/800-2MB L2
NOTE: See "Configuration Information
- Factory Integrated Models" section |
Intel Pentium 4 - 3.2
GHz/800-2MB L2 |
Intel Pentium 4 - 3.4
GHz/800-1MB L2 |
Intel Pentium 4 - 3.2
GHz/800-1MB L2 |
Intel Pentium 4 - 3.0
GHz/800-1MB L2
NOTE: See "Configuration Information
- Factory Integrated Models" section |
Intel Celeron 2.8
GHz/533-256KB L2
NOTE: See "Configuration Information
- Factory Integrated Models" section |
|
Cache
Memory
One of the following depending on Model |
Integrated 1MB level 2 ECC cache
(Pentium 4 models) |
Integrated 2MB level 2 ECC cache
(Pentium 4 models) |
Integrated 256KB level 2 ECC
cache (Celeron models) |
|
Memory Protection |
Advanced ECC |
|
ML310 G2 Memory |
Type
|
PC3200 DDR SDRAM (400MHz) |
Standard
|
512 MB (1 x 512 MB) |
Maximum |
4 GB |
|
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
|
Expansion Slots |
Slot Number
|
Bus Speed
|
Maximum Card Length
|
Hot Plug
|
|
1
|
64-bit/100MHz PCI-X
|
12.3
|
No
|
3.3V
|
2
|
64-bit/100MHz PCI-X
|
12.3
|
No
|
3.3V
|
3
|
PCI Express x4
(x8 connector)
|
12.3
|
No
|
N/A
|
4
|
32-bit/33MHz PCI
|
12.3
|
No
|
3.3V
|
|
Storage Controllers |
Single Channel Ultra320 SCSI
Adapter (SCSI Models) OR |
Integrated four port SATA controller
with integrated SATA RAID 0, 1 (SATA Models)
NOTE: Integrated SATA RAID functionality
supports 2 hard drives. |
NOTE: See the
"Storage" section of these QuickSpecs for information on controllers
and cables required to support SATA drive configurations |
|
Storage |
Diskette Drive |
Optional
1.44 MB Diskette Drive |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
|
Maximum
Internal Storage | Hot Plug SCSI
| 1.2TB | 4
x 300GB Ultra320 | Non-Hot
Plug SCSI | 587GB | 4
x 146GB Ultra320 | Hot
Plug SAS (3.5") | 587GB | 4
x 146GB SAS | Hot Plug
SATA (3.5") | 2.0TB | 4
x 500GB SATA | Non-Hot
Plug SATA | 320GB | 4
x 80GB SATA | NOTE:
See the "Storage" section of these QuickSpecs for information on controllers
and cables required to support SATA and SAS drive configurations |
|
Graphics |
Integrated ATI RAGE XL Video
Controller with 8MB SDRAM Video Memory |
|
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit (PN 238547-B22) available) |
|
ProLiant Essentials
Foundation Pack Software |
HP Systems Insight Manager
| HP's new HP Systems Insight
Manager (HP SIM) helps maximize system uptime and performance and reduce system
maintenance costs by providing proactive notification of problems before those
problems result in unplanned downtime or reduced productivity. HP SIM are both
easy to set up work with the Insight Management Agents, integrated Lights-Out
and Remote Insight Lights-Out Edition, and Version Control Agents to deliver robust
fault, configuration, and asset management as well as remote administration. With
HP SIM customers will also be able to take advantage of role-based security; the
ability to manage ProLiant, Integrity, and HP 9000 systems; and plug-ins for storage,
client, printer, and power management as well as server rapid deployment, performance
management, and workload management. For more details on HP SIM visit https://www.hp.com/go/hpsim. |
|
Management Agents | The
Management Agents form the foundation for HP's Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into
HP servers, workstations, desktops, and portables, and send alerts to HP Systems
Insight Manager and other enterprise management applications in case of subsystem
or environmental failures. For additional information about the Management Agents
and other management products from HP, please visit the management Web site at
https://www.hp.com/servers/manage. |
|
SmartStart | SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at https://www.hp.com/servers/manage.
SmartStart version supported (minimum): SmartStart
7.20. | |
Subscriber's
Choice | Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription service that
provides automatic delivery of software and driver change notifications for ProLiant
products. Sign up at https://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis. | |
ROMPaq,
support software, and configuration utilities | The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options available in SmartStart or downloadable from Software and Drivers
download pages, linked from the SmartStart website at https://www.hp.com/servers/smartstart. |
|
Survey Utility and diagnostics
utilities | The most advanced
configuration analysis, reporting and troubleshooting utilities used by HP and
at your fingertips, available in SmartStart. | |
Optional ProLiant Essentials Value
Packs | Optional software offerings
that selectively extend the functionality of an Adaptive Infrastructure to address
specific business problems and needs: - Rapid Deployment Pack - an automated
solution for multi-server deployment and provisioning, enabling companies to quickly
and easily adapt to changing business demands.
- Workload Management Pack
- provides easier management of complex environments, improving overall server
utilization and enabling Microsoft® Windows® 2000 customers for the first
time to confidently deploy multiple applications on a single multiprocessor ProLiant
Server.
- Performance Management Pack - a performance management solution
that identifies and explains hardware performance bottlenecks on ProLiant servers
and attached options enabling users to better utilize their valuable resources.
- Intelligent
Networking Pack - detects and analyzes network bottlenecks or broken network linkages
and steers traffic to the optimum route based on network conditions, plus it provides
an extra layer of protection. The virus throttle feature of the solution slows
the propagation of fast spreading virus
- Vulnerability and Patch Management
Pack - identifies and remediates software security vulnerabilities due to missing
patches as well operating system configurations that can be exploited by viruses,
worms, and other blended threats
- Virtual Machine Management Pack - provides
central management and control of virtual machines from Microsoft and VMware.
Integrated approach provides the ability to manage both physical and virtual resources
from a single management console.
- Server Migration Pack - The Server
Migration Pack automates the manual processes required for migrating servers between
physical or virtual platforms (P2V, V2P, and V2V).
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information. |
| NOTE:
For more information regarding ProLiant Essentials Software, please see the
following URL: https://www.hp.com/servers/proliantessentials. |
|
Industry Standard Compliance |
ACPI V1.0b Compliant
PCI 2.2 Compliant
PCI-X 1.0 Compliant
PCI-Express 1.0a Compliant
PXE Support
WOL Support
Microsoft Logo certifications
Novell Logo certifications
USB2.0 |
|
Manageability |
HP Systems Insight Manager
Online ROM Flash Utility
Automatic Server Recovery-2 (ASR-2)
Drive Parameter Tracking (with Smart Array Controller)
Dynamic Sector Repairing (with Smart Array Controller)
Pre-Failure Warranty (covers processors, memory and SCSI hard drives)
BIOS Serial Console |
|
Security |
Power-on password
Setup password
Diskette boot control
Power switch security
Intruder Alert Message |
|
Server Power Cords |
All models ship with one 6'
standard low-line country specific power cord. |
|
Power Supply |
350 Watts, PFC (Power Factor
Correcting) |
|
System Fans |
1 - Non-hot
plug, Non-redundant system fan
NOTE: Does not include fans in CPU
heatsink or power supply. |
|
Rack
Airflow Requirements |
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack
is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
- Front and rear doors: If your 42U
server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top
to bottom to permit adequate airflow (equivalent to the required 64
percent open area for ventilation).
- Side: The clearance between the
installed rack component and the side panels of the rack must be a
minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
|
|
NOTE: For additional information, refer to the Setup and Installation
Guide or the Documentation CD provided with the server, or to the server documentation
located in the Support section at the following URL: https://h18000.www1.hp.com/products/servers/ProLiantdl760/index.html. |
|
Factory Express Portfolio for
Servers and Storage |
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and storage
products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple
configuration, racking, installation, complex configuration and design services as well
as individual factory services, such as image loading, asset tagging, and
custom packaging. HP products supported through Factory Express include a wide
array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant
Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000,
VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to https://www.hp.com/go/factory-express.
|
|
HP ProLiant Smart
Buys |
The
HP Smart Buy program offers mainstream business solutions at competitive
prices with excellent availability and superior HP quality. It offers a
wide range of industry-leading HP products at compelling prices, allowing
you to receive richer configurations with additional options.
NOTE: For detailed specification information on ProLiant Smart Buys
please click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf
|
|
Service and Support |
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of resellers and service providers.
Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements.
NOTE: Limited
warranty includes 1 year parts, 1 year labor, 1 year on-site support.
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are
available including:
- Installation and start up
- Education courses
- Extended onsite hardware coverage hours from
same business day 13 hours, 5 day to 24 hours, 7 days call window with
options including 4-hour response or 6-hour Call To Repair
- Comprehensive range of software technical
support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT
solutions helping to deliver high level of application availability.
Response times range from 30 mins for critical problems to 2 hours.
- System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server, purchased at the same time or afterward, internal
to the enclosure, as well as 22" and smaller external monitors and
tower UPS options up to 3kVA; these items will be covered at the same
service level and for the same coverage period as the server. Coverage
of UPS Battery is not included, standard warranty terms & conditions
apply. For servers or storage systems installed within a rack, service
also covers all HP qualified rack options installed within the same rack.
|
NOTE: For more
information on HP Care Pack services, contact any of our worldwide sales
offices or resellers or visit our worldwide Web site on the internet at:
https://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers
and resellers, please visit us at: https://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty
and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html |
Models
NOTE: For detailed
specification information on ProLiant Smart Buys please click on the following
link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf. |
ML310T02 3.4/800-1M
HP-SCSI
376793-001 |
Processor(s) |
(1) Intel Pentium 3.40 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Single Channel Ultra320 SCSI
controller in PCI slot |
Hard Drives |
None ship standard (up to 4
hot plug SCSI drives supported) |
Internal Storage |
1.20 TB maximum hot plug SCSI
(with optional hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.4/800-1M
HP-SATA/SAS
376794-001
|
Processor(s) |
(1) Intel Pentium 3.40 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Four port Integrated SATA Controller |
Hard Drives |
None ship standard (up to 4
hot plug SATA or SAS drives supported)
NOTE: See the "Storage" section of these
QuickSpecs for information on controllers and cables required to support
SATA and
SAS
drive configurations |
Internal Storage |
2.0 TB maximum hot plug SATA
(with optional hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.4/800-1M
NHP-SCSI
378247-002 |
Processor(s) |
(1) Intel Pentium 3.40 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Single Channel Ultra320 SCSI
controller in PCI slot |
Hard Drives |
(1) 36.4 GB Ultra320 SCSI |
Internal Storage |
587.2 GB maximum NHP SCSI (with
optional hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.4/800-1M
NHP SATA80
381833-002
|
Processor(s) |
(1) Intel Pentium 3.40 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Four port Integrated SATA Controller |
Hard Drives |
(1) 80GB Non hot plug SATA drive |
Internal Storage |
320 GB maximum NHP SATA (with
optional drives)
NOTE: See the "Storage"
section of these QuickSpecs for information on controllers and cables required
to support SATA drive configurations |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.2/800-2M
HP SCSI
381839-001
|
Processor(s) |
(1) Intel Pentium 3.20 GHz (standard) |
Cache Memory |
2MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Single Channel Ultra320 SCSI
controller in PCI slot |
Hard Drives |
None ship standard (up to 4
hot plug SCSI drives supported) |
Internal Storage |
1.20 TB maximum hot plug SCSI
(with optional hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.2/800-2M
HP SATA/SAS
381838-001
|
Processor(s) |
(1) Intel Pentium 3.20 GHz (standard) |
Cache Memory |
2MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Four port Integrated SATA Controller |
Hard Drives |
None ship standard (up to 4
hot plug SATA or SAS drives supported)
NOTE: See the "Storage" section of these
QuickSpecs for information on controllers and cables required to support
SATA and
SAS
drive configurations |
Internal Storage |
2.0 TB maximum hot plug SATA
(with optional hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.2/800-1M
HP-SCSI
376871-001 |
Processor(s) |
(1) Intel Pentium 3.20 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Single Channel Ultra320 SCSI
controller in PCI slot |
Hard Drives |
None ship standard (up to 4
hot plug SCSI drives supported) |
Internal Storage |
1.2 TB maximum hot plug SCSI
(with optional hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.2/800-1M
HP-SATA/SAS
376852-001 |
Processor(s) |
(1) Intel Pentium 3.20 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Four port Integrated SATA Controller |
Hard Drives |
None ship standard (up to 4
hot plug SATA or SAS drives)
NOTE: See the "Storage" section of these
QuickSpecs for information on controllers and cables required to support
SATA and
SAS
drive configurations |
Internal Storage |
2.0 TB maximum hot plug SATA
(with optional hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.2/800-1M
NHP SCSI
378279-002
|
Processor(s) |
(1) Intel Pentium 3.20 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Single Channel Ultra320 SCSI
controller in PCI slot |
Hard Drives |
(1) 36.4 GB Ultra320 SCSI |
Internal Storage |
320 GB maximum (with optional
hard drives) |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
|
ML310T02 3.2/800-1M
NHP SATA80
381832-002
|
Processor(s) |
(1) Intel Pentium 3.20 GHz (standard) |
Cache Memory |
1MB Level 2 cache |
Memory |
512 MB (Standard) to 4 GB (Maximum)
of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
Network Controller |
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
Storage Controller |
Four port Integrated SATA Controller |
Hard Drives |
(1) 80GB Non hot plug SATA drive |
Internal Storage |
320 GB maximum non hot plug
SATA (with optional hard drives)
NOTE: See the "Storage"
section of these QuickSpecs for information on controllers and cables required
to support SATA drive configurations |
Optical Drive |
48x IDE (ATAPI) CD-ROM Drive |
Diskette Drive |
None ship standard (Optional
1.44 MB Diskette Drive) |
Form Factor |
Tower (5U) (Tower to Rack Enabling
Option Kit available) |
Configuration Information - Factory Integrated Models
NOTE:
All configure-to-order servers must start with a CTO Chassis. Use the following
section to order a server customized to your requirements with options integrated
at the factory. The options you select in steps 2 and 3 will be integrated
with the base configuration you select in step 1. Additional options selected
in Step 4 will also be integrated when applicable.
NOTE: Standard models of this product offering (see previous section
of this document) do not support HP Factory Express Server Configuration
Level 1. |
Step 1: Base Configuration |
Models |
HP ProLiant ML310 Tower CTO Chassis
NHP SCSI |
381850-405
|
HP ProLiant ML310 Tower CTO Chassis
NHP SATA |
381851-405
|
HP ProLiant ML310 Tower CTO Chassis
HP-SCSI |
378559-405
|
HP ProLiant ML310 Tower CTO Chassis
HP-SATA/SAS |
378560-405
|
Factory Integrated Models ship
with: |
|
Embedded NC7761 PCI 10/100/1000T
Gigabit network adapter |
|
Integrated four Channel SATA Controller
(included with 381851-405 and 378560-405 ONLY) |
|
350 Watts, PFC (Power Factor Correcting) |
|
Keyboard |
|
Mouse |
|
Tower 5U Form Factor |
|
|
Step
2: Choose Required Options (only one of the following from each list unless otherwise
noted | Processors | Celeron
Processor 2.80-GHz/533 MHz Front Side Bus, FIO |
383872-L22 | Pentium
Processor 3.00-GHz/800 MHz Front Side Bus, FIO |
390813-L22 | Pentium
Processor 3.20-GHz/ 800 MHz Front Side Bus, 1MB FIO |
383871-L22 | Pentium
Processor 3.20-GHz/ 800 MHz Front Side Bus, 2MB FIO |
383870-L22 | Pentium
Processor 3.40-GHz/ 800 MHz Front Side Bus, 1MB FIO |
383869-L22 | Pentium
Processor 3.40-GHz/ 800 MHz Front Side Bus, 2MB FIO |
383868-L22 | Base
Memory | 256 MB Advanced ECC
PC3200 DDR SDRAM DIMM Kit (1 x 256 MB) |
354557-B21 | 512
MB Advanced ECC PC3200 DDR SDRAM DIMM Kit (1 x 512 MB) |
| 1024
MB Advanced ECC PC3200 DDR SDRAM DIMM Kit (1 x 1024 MB) |
| Optical
Drive | CD-RW/DVD-ROM Combo Drive
Option Kit | |
HP ProLiant 48X CD w/SCREWS |
337863-B21 | 16X
DVD-ROM Drive Option Kit (Carbon) |
| Base
Hard Drives | Non-Hot
Plug U320 SCSI Drives NOTE: For use in Non-Hot Plug SCSI base
configurations P/N 381850-405 or 381805-B21. |
|
HP 36GB U320 15K NHP HDD
| |
HP 72GB U320 10K NHP HDD |
| Hot
Plug U320 SCSI Drives NOTE: For
use in Hot Plug SCSI base configurations P/N 378559-405 or 378559-B21.
| |
HP 72GB U320 10K Universal HDD
| | HP 146GB U320
10K Universal HDD | | HP
36GB U320 15K Universal HDD |
| HP
72GB U320 15K Universal HDD |
| Non-Hot
Plug SATA Drives NOTE: For use
in Non-Hot Plug SATA base configurations P/N 381851-405 or 381851-B21.
| |
HP 80GB 1.5G SATA 7.2K NHP 3.5"
HDD | | HP
160GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO |
399164-B21 | HP
250GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO |
399165-B21 | HP
500GB 1.5G SATA 7.2K 3.5" HDD |
| Hot
Plug SATA Drives NOTE: For use
in Hot Plug SATA/SAS base configurations P/N 378560-405 or 378560-B21.
| |
HP 80GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 160GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 250GB 1.5G SATA 7.2K 3.5"
HDD | |
Hot Plug SAS 3.5" Drives
NOTE: for use in Hot Plug SATA/SAS base
configurations P/N 378560-405 or 378560-B21. | |
HP 36GB 3G SAS 15K 3.5"
HDD | |
HP 72GB 3G SAS 15K 3.5"
HDD | |
HP 146GB 3G SAS 15K 3.5"
HDD | |
|
Step 3: Choose Additional
Factory Integratable Options |
Controllers |
Smart Array 641 Controller
|
|
Smart Array 642 Controller
|
|
64-Bit/133MHz Dual Channel Ultra320
SCSI Adapter
|
|
64-Bit/133-MHz Single Channel
Ultra320 SCSI HBA G2 |
|
|
Step 4: Choose Additional Options
for Factory Integration |
NOTE: For additional
options, please refer to the "Options" section below. |
Options
ProLiant
Essentials
Value Pack Software |
ProLiant Essentials
Intelligent Networking Pack |
|
ProLiant Essentials
Intelligent Networking Pack, Single Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
|
|
NOTE:
For additional ProLiant Intelligent Networking Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12062_na/12062_na.HTML
|
|
ProLiant Essentials
Performance Management Pack |
|
ProLiant Essentials
Performance Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key, HP Management
CD and documentation.
NOTE: The most recent version of the software can always be downloaded
at https://www.hp.com/products/pmp. |
|
NOTE:
For additional ProLiant Intelligent Networking Pack - Windows License Kits
please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12062_na/12062_na.HTML |
|
ProLiant Essentials
Intelligent Networking Pack - Linux Edition, Single Server License |
397004-B21
|
NOTE:
For additional ProLiant Intelligent Networking Pack - Linux License Kits
please see the QuickSpecs at:
https://h18000.www1.hp.com/products/quickspecs/12327_na/12327_na.HTML
|
|
ProLiant Essentials
Rapid Deployment Pack Windows Edition and Linux Edition Release |
|
Rapid Deployment
Pack, Single-Server License
NOTE: This license allows 1 server
to be deployed and managed via RDP. |
|
NOTE:
For additional ProLiant Essentials Rapid Deployment Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.HTML
https://h18000.www1.hp.com/products/quickspecs/11713_na/11713_na.HTML |
|
ProLiant Essentials
Virtualization Management Software |
|
ProLiant Essentials
Virtual Machine Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation. |
372214-B21
|
ProLiant
Essentials Server Migration Pack, Single-Migration License
NOTE: Contains one license, enabling 1 server migration, with a unique
license activation key and documentation.
NOTE: This license allows 1 server to be migrated from a physical
server to a virtual machine. Or this license can be used to migrate a virtual
machine from one virtualization layer i.e. VMware GSX to a different virtualization
layer such as VMware ESX or Microsoft Virtual Server 2005.
|
375345-B21
|
NOTE:
For additional ProLiant Essentials Virtualization Management Software
License Kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12328_na/12328_na.HTML
|
|
ProLiant Essentials
Vulnerability and Patch Management Pack |
|
ProLiant Essentials
Vulnerability and Patch Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
|
371645-B21
|
NOTE:
For additional ProLiant Vulnerability and Patch Management Pack License
Kits, please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12111_na/12111_na.HTML
|
|
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials. |
|
|
Memory
(SDRAM DIMMs)
|
1024 MB Advanced ECC PC3200 DDR
SDRAM DIMM (1 x 1024 MB)
|
|
512 MB Advanced ECC PC3200 DDR
SDRAM DIMM (1 x 512 MB)
|
|
256 MB Advanced ECC PC3200 DDR
SDRAM DIMM (1 x 256 MB) |
354557-B21
|
|
Optical
Drives
|
16X DVD-ROM Drive
Option Kit (Carbon) |
217053-B21 |
CD-RW/DVD-ROM Combo Drive Option
Kit
NOTE: The DVD-ROM drive is supported
in the CD-ROM bay and in the removable media bay. If placed in the removable
media bay, it requires the 2-Device IDE cable (PN 305381-B21). |
|
HP DVD+R/RW 16X Half Height |
|
|
Diskette Drives
|
1.44MB Floppy Drive Option Kit |
379257-B21
|
|
Serial Port Kit |
HP ProLiant 2nd Serial port option
kit |
390390-B21
|
|
ML310 G2 Hard Drives | Ultra320
- Universal Hot Plug (SCSI Hot Plug Models Only) |
| HP
300GB U320 10K Universal HDD |
| HP
146GB U320 10K Universal HDD |
| HP
72GB U320 10K Universal HDD | |
HP 146GB U320 15K Universal HDD |
| HP
72GB U320 15K Universal HDD | |
HP 36GB U320 15K Universal HDD |
| Ultra320
- Non-Hot Plug (SCSI Non Hot Plug Models Only) |
| HP
146GB U320 10K NHP HDD | |
HP 72GB U320 10K NHP HDD | |
HP 36GB U320 15K NHP HDD |
|
NOTE: Please
see the Wide Ultra320 Universal Hot Plug QuickSpecs for additional technical information
on the hard drives Support details, please see the following: https://h18000.www1.hp.com/products/quickspecs/11531_na/11531_na.HTML |
| Serial-Attached
SCSI (SAS) Hot Plug Hard Drive (SATA/SAS Hot Plug Models Only) | |
HP 146GB 3G SAS 15K 3.5"
HDD | |
HP 72GB 3G SAS 15K 3.5"
HDD | |
HP 36GB 3G SAS 15K 3.5"
HDD | |
Serial-ATA (SATA) Hot Plug
Hard Drive (SATA/SAS Hot Plug Models Only) |
| HP
250GB 1.5G SATA 7.2K 3.5" HDD | |
HP 160GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 80GB 1.5G SATA 7.2K 3.5"
HDD | |
Serial-ATA (SATA) Non Hot
Plug Hard Drive (SATA Non Hot Plug Models Only) |
| HP
80GB 1.5G SATA 7.2K NHP 3.5" HDD |
| NOTE:
Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity,
height, width, interface, transfer rate, seek time, physical configuration, and
operating temperature: https://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.HTML
| |
|
Hard Drive Cables |
HP 4-port SATA/SAS cable (target
fan cable) |
389653-B21
|
NOTE: This cable
is required when the HP 6-port SATA RAID controller is installed on hot
plug SATA/SAS models of the ML310 G2. See the "Storage" section of these
QuickSpecs for information on controllers and cables required to support
SATA drive configurations. |
|
HP 2-port SATA Cable |
379093-B21
|
NOTE: This cable
is required when the HP 6-port SATA RAID controller is installed on non-hot
plug SATA/SAS models of the ML310 G2. See the "Storage" section of these
QuickSpecs for information on controllers and cables required to support
SATA drive configurations. |
|
|
Storage Controllers | SCSI
Controllers | |
NOTE: The following
Storage Controllers are qualified for SCSI drives only. They do not support SATA
or SAS Drives. | |
Smart Array 6402/128 Controller |
|
Smart Array 6404/256 Controller |
|
Smart Array 641 Controller |
|
Smart Array 642 Controller |
| 128MB
Battery-Backed Cache Enabler NOTE: This
128MB BBWC supports the Smart Array 641 Controller and Smart Array 642 Controller.
| |
Ultra320 Expansion Module for
SA-6402 | |
64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter |
| 64-Bit/133-MHz
Single Channel Ultra320 SCSI HBA G2 |
| NOTE:
Please see the following Controller or SCSI Adapter QuickSpecs for Technical
Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported,
SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID
support, and additional information: https://h18000.www1.hp.com/products/quickspecs/12067_na/12067_na.HTML
(Smart Array 641) https://h18000.www1.hp.com/products/quickspecs/12069_na/12069_na.HTML
(Smart Array 642) https://h18000.www1.hp.com/products/quickspecs/10429_na/10429_na.HTML
(Dual Channel SCSI Adapter) https://h18000.www1.hp.com/products/quickspecs/11943_na/11943_na.HTML
(Single Channel SCSI HBA) |
|
SAS Controllers | |
Smart Array P600 Controller
NOTE: Serial SCSI/ATA. |
| 512MB
DDR BBWC Upgrade | |
NOTE: Please
see the following Controller QuickSpecs for Technical Specifications such as PCI
Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer
Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional
information: https://h18000.www1.hp.com/products/quickspecs/12247_na/12247_na.HTML
(Smart Array P600 Controller) | |
SAS HBA | |
HP 8 Internal Port SAS HBA with
RAID | |
NOTE: Please
see the HBA QuickSpecs for additional information: https://h18000.www.1.hp.com/products/quickspecs/12332_div/12332_div.HTML | |
SATA Controller | |
HP 6-port SATA RAID Controller
NOTE: See the "Storage" section of these
QuickSpecs for information on controllers and cables required to support SATA
drive configurations |
|
|
Communications
| HP NC150T PCI 4-port Gigabit
1000T Combo Switch Adapter | |
HP NC310F PCI-X 1000SX Gigabit
Server Adapter | |
HP NC320T PCI Express 1000T Gigabit
Server Adapter | |
HP NC1020 PCI 1000T Gigabit Server
Adapter | |
HP NC7170 PCI-X Dual Port 1000T
Gigabit Server Adapter | |
HP NC7771 PCI-X 1000T
Gigabit Server Adapter | 290563-B21
|
NOTE:
NC61XX, NC71XX, NC77XX, or NC1020 network adapter (NIC) can be used for redundancy
with the embedded NC7761 NIC. When either the embedded NC7761 or the NC1020 is
teamed with other HP NICs, Jumbo Frames and LSO features are automatically disabled. |
|
Management Options
|
Remote Insight Lights-Out Edition II
|
227251-001
|
|
Tape Drives |
NOTE: For the
complete listing of Tape Drive offerings for this server, please visit: https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For recommended tape drive offerings for this ProLiant server see the following: |
| USB
Tape Drives | |
HP StorageWorks DAT 40 USB Internal
Tape Drive (Carbonite) | DW022A |
HP StorageWorks DAT 40 USB External
Tape Drive (Carbonite) | DW023A |
HP StorageWorks DAT 72 USB Internal
Tape Drive (Carbonite) | DW026A |
HP StorageWorks DAT 72 USB External
Tape Drive (Carbonite) | |
Internal, External, and Rack-Mount
Ultrium Tape Drives | |
HP StorageWorks Ultrium 232 Internal
Tape Drive (Carbonite) | |
HP StorageWorks Ultrium 232 External
Tape Drive (Carbonite) | |
HP StorageWorks Ultrium 448 Internal
Tape Drive (Carbonite) |
DW016A | NOTE:
Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional options
such as controllers, media, and other related items: https://h18006.www1.hp.com/products/quickspecs/11739_na/11739_na.html
For an up-to-date listing of the latest O/S and software support details for HP
Ultrium tape drives, please visit: https://www.hp.com/go/connect. |
| Internal,
External, and Rack-Mount DAT Drives |
| HP
StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon) |
Q1522B | HP
StorageWorks DAT 72 SCSI External Tape Drive (Carbon) |
Q1523B | HP
StorageWorks 1U Rack-mount kit with one DAT 72 (Carbon) |
A7443A | NOTE:
Please see the DAT Tape Drive QuickSpecs for controllers, media, and other options:
https://h18000.www1.hp.com/products/quickspecs/11883_na/11883_na.HTML
https://h18006.www1.hp.com/products/quickspecs/12128_na/12128_na.html
For an up-to-date listing of the latest O/S and software support details for HP
DAT drives, please visit: https://www.hp.com/go/connect. |
| Rack-Mount
Tape Drive Enclosures | |
HP StorageWorks 1U Rack-Mount
Kit NOTE: The 1U Rack-mount Kit can
support up to (2) half-height tape drives and compatible with multiple Single-Ended
and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160,
Ultrium 215, Ultrium 232 and Ultrium 448 tape drives. |
| HP
StorageWorks 1U USB Rack-Mount Kit |
| 1U
USB Cable Option Kit NOTE: Converts
a 1U SCSI rack-mount kit to a USB interface to support the USB tape drives. |
| NOTE:
Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information
regarding these kits: https://h18000.www1.hp.com/products/quickspecs/10854_na/10854_na.HTML |
| |
|
Tape
Autoloaders | DAT Autoloader
| |
HP StorageWorks DAT 72x6 Autoloader
(Internal) | Q1566A |
HP StorageWorks DAT 72x6 Autoloader
(External) | Q1567A |
NOTE: Please
see the DAT 72x6 Tape Autoloader QuickSpecs for additional options such as host
bus adapters, controllers and media: https://h18006.www1.hp.com/products/quickspecs/11905_na/11905_na.html | |
HP StorageWorks 1/8 Tape
Autoloader | |
HP StorageWorks 1/8 Ultrium 960
Tape Autoloader | AF204A |
HP StorageWorks 1/8 Ultrium 448
Tape Autoloader | AF203A |
HP StorageWorks 1/8 Ultrium 232
Tape Autoloader | AF202A |
1/8 Tape Autoloader Rackmount
Kit NOTE: Required to install the
unit in a standard 19-inch rack; includes rails and rackmount instructions | C9268R |
NOTE: Please
reference the 1/8 Tape Autoloader QuickSpecs at https://www.hp.com/go/automation
for additional information needed to create a complete solution; reference current
compatibility information at https://www.hp.com/go/ebs
| |
|
Ultra Density Optical
Jukeboxes |
1900ux, 4 drive, 64 slot jukebox |
AA966A |
3800ux, 4 drive, 128 slot jukebox |
AA969A |
7100ux, 6
drive, 238 slot jukebox
|
AA971A |
NOTE: Please see
the HP StorageWorks Ultra Density Optical Jukeboxes QuickSpecs for a complete
listing of available jukeboxes at:
https://h18006.www1.hp.com/products/quickspecs/11944_na/11944_na.html
NOTE: Please reference the Ultra Density Optical Jukebox QuickSpecs
at https://www.hp.com/go/optical
for additional information needed to create a complete solution |
|
|
HP
StorageWorks Modular Smart Array 30 | HP
StorageWorks Modular Smart Array 30 SB NOTE:
Rack-mountable 14 drive enclosure with single bus, redundant power supplies | 302969-B21 |
HP StorageWorks Modular Smart
Array 30 DB NOTE: Rack-mountable 14
drive enclosure with dual bus, redundant power supplies | 302970-B21 |
NOTE: The Modular
Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 Hot Plug Hard
Drives. | |
|
Uninterruptible Power Systems – Tower Supply
|
HP T500 UPS
120 V
|
361475-001
|
HP UPS Model T700 (700VA, 500
Watt), Low Voltage |
204015-001
|
HP T750 UPS |
378439-D71
|
HP UPS Model T1000 XR (1000VA,
700 Watt), Low Voltage |
204155-001
|
HP UPS Model T1500 XR (1440VA,
1050 Watt), Low Voltage |
|
|
Uninterruptible Power Systems Rack
|
HP UPS R5500 XR, (5000VA, 4500
Watt), High Voltage |
326529-D71 |
HP UPS R1500 XR (100 to 127) |
|
HP UPS R3000 XR (120V) |
|
HP UPS R3000 XR (208V) |
|
HP UPS R5500 XR, (5000VA, 4500
Watt), High Voltage |
|
UPS R12000 XR N+ x (200-240V)
(hardwired) |
207552-B22
|
NOTE: The UPS
R12000 XR has a hardwired input and output connection. |
|
|
Rack Enabling Kit
|
ProLiant ML310/ML330 G2 Rack Enabling
Kit |
238547-B22
|
NOTE: Support
for racks with round or square mounting holes (including all Compaq
and HP Rack System /E and HP Systems), with an adjustment range of
24" 36". |
|
|
Other |
Internal to External SCSI Cable
Option Kit (HD68) |
159547-B22
|
Internal to External SCSI Cable
Option Kit (VHDCI) |
333370-B21
|
Telco Rack Option Kit |
251243-B21
|
NOTE: Support
for all 2-post Telco racks requires the use of the standard four post rack
kit and an additional option kit from HP. |
|
|
USB Options |
USB Optical Scroll Mouse (Carbonite) |
DD441B |
USB 1.44-MB External Diskette
Drive (Carbonite) |
DC141B
|
|
HP Rack 5000 Series (Graphite
Metallic) |
HP 5642 Rack-Unassembled |
|
|
Rack Options for
Rack 5000 Series |
Stabilizer Kit for 5642 Rack (Graphite
Carbon)
NOTE: The stabilizing kit is used
to prevent rack from tipping over. |
374493-B21
|
Baying Kit for 5642 Rack (Graphite
Carbon)
NOTE: The baying kit is used to join
two or more HP 5642 racks. |
374499-B21
|
|
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
| 10642
G2 (42U) Rack Cabinet - Pallet | |
10642 G2 (42U) Rack Cabinet -
Shock Pallet | |
10642 G2 (42U) Rack Cabinet -
Crated | AF003A |
10642 G2 (42U) Rack Cabinet,
with Extension - Shock Pallet | |
10642 G2 (42U) Rack Cabinet,
without door - Shock Pallet | AF005A |
10642 G2 (42U) Rack Cabinet -
with Extension, without door - Shock Pallet | AF006A |
10636 G2 (36U) Rack Cabinet -
Pallet | |
10636 G2 (36U) Rack Cabinet -
Shock Pallet | |
10636 G2 (36U) Rack Cabinet -
Crated | |
10636 G2 (36U) Rack Cabinet ,
with Extension - Shock Pallet | |
10636 G2 (36U) Rack Cabinet,
without door - Shock Pallet | AF015A |
10636 G2 (36U) Rack Cabinet,
with Extension, without door - Shock Pallet | AF016A |
NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed. | |
NOTE: Please
see the Rack 10000 G2 QuickSpecs for Technical Specifications such as height,
width, depth, weight, and color: https://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.HTML
| | NOTE:
For additional information regarding Rack Cabinets, please see the following URL:
https://www.hp.com/go/rackandpower. | |
|
Rack Options for Rack 10000 G2 Series | HP
10642 G2 Front Door | AF009A |
HP 10636 G2 Front Door | AF019A |
10642 G2 (42U) Side Panels (set
of two) (Graphite Metallic) | AF054A |
10636 G2 (36U) Side Panels (set
of two) (Graphite Metallic) | AF056A |
10636 G2 Rear Extension Kit | AF060A |
600mm G2 Stabilizer Option Kit
(Graphite) | AF062A |
600mm G2, Heavy Duty Stabilizer
Option Kit (Graphite) | AF064A |
800mm G2 Stabilizer Option Kit
(Graphite) | AF066A |
800mm G2, Heavy Duty Stabilizer
Option Kit (Graphite) NOTE: Supports
10000 G2 Series only.
| AF068A |
HP 10000 G2 Rack Grounding Kit | AF074A |
600W 10K G2 Rack Tie Down | AF076A |
NOTE: For additional
information regarding Rack Options, please see the following URL: https://www.hp.com/go/rackandpower. | |
|
HP Rack 10000 Series (Graphite
Metallic) | HP Rack S10614
(14U) Rack Cabinet - Shock Pallet |
| HP
Rack 10842 (42U) Rack Cabinet - Pallet |
| HP
Rack 10842 (42U) Rack Cabinet - Shock Pallet |
| HP
Rack 10647 (47U) Pallet |
| HP
Rack 10647 (47U) Crated |
245160-B23 | HP
Rack 10642 (42U) Pallet |
| HP
Rack 10642 (42U) Shock Pallet |
| HP
Rack 10642 (42U) Crated |
245161-B23 | HP
Rack 10636 (36U) Pallet |
| HP
Rack 10636 (36U) Shock Pallet |
| HP
Rack 10636 (36U) Crated |
245162-B23 | HP
Rack 10622 (22U) Pallet |
| HP
Rack 10622 (22U) Shock Pallet |
| HP
Rack 10622 (22U) Crated |
245163-B23 | NOTE:
-B21 (pallet) used to ship empty racks shipped on a truck -B22 (shock
pallet) used to ship racks with equipment installed (by custom systems, VARs and
Channels) -B23 (crated) used for air shipments of empty racks | |
NOTE: Please
see the Rack 10000 QuickSpecs for Technical Specifications such as height, width,
depth, weight, and color:
https://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML
|
|
NOTE: For additional
information regarding Rack Cabinets, please see the following URL: https://h18000.www1.hp.com/products/servers/proliantstorage/racks/index.html. | |
|
HP KVM Switch Options
|
IP Console Switch Box (KVM/IP),
3 x 1 x 16 |
|
IP Console Switch Box (KVM/IP),
1 x 1 x 16 |
|
Server Console Switch (KVM), 0
x 1 x 8 port |
|
Server Console Switch (KVM), 0
x 2 x 16 port |
|
PS/2 Interface Adapter, 1 pack |
|
PS/2 Interface Adapter, 8 pack |
|
USB Interface Adapter, 1 pack |
|
Serial Interface adapter - 1 Pack
with power supply |
|
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: https://www.hp.com/go/kvm.
|
|
HP 1x 4 USB/PS2 KVM Switch, TT
|
371301-D71
|
HP PS2 KVM Cable with audio, 6',
2-pack |
371730-B21
|
HP USB KVM Cable with audio, 6',
2-pack |
371729-B21
|
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: https://www.hp.com/go/kvm.
|
|
|
HP Serial Console
Server Options |
HP 16 Port Serial Console Server
|
|
HP 48 Port Serial Console Server
|
|
Serial Adapter, RJ45-DB9 DCE Female,
1 Pack |
|
Serial Adapter, RJ45-DB9 DCE Female,
8 Pack |
AF110A
|
NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: https://www.hp.com/go/kvm.
|
|
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: https://www.hp.com/go/kvm. |
|
|
Service
and Support Offerings (HP Care Pack Services) |
Hardware Services
On-site Service |
|
Next Business Day On-site
Service, 5-Day x 9-Hour Coverage, 3 Years, Electronic |
U4445E
|
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic |
U4446E
|
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic
|
U4447E
|
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
U4448E
|
|
Installation &
Start-up Services |
|
Hardware Installation, Electronic |
U4456E
|
Installation & Start-Up
of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays, Electronic |
U4457E
|
|
Support Plus |
|
Onsite HW support, 8am-9pm,
M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays,
Electronic |
U4458E
|
|
Support Plus 24 |
|
Onsite HW support 24x7,
4hr response and Microsoft O/S SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic |
U4459E
|
Onsite HW support 24x7,
4hr response and SuSE Linux SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time incl. HP holidays, Electronic |
|
Onsite HW support 24x7,
4hr response and Red Hat ES Linux SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic |
U8328E
|
|
|
Memory
HP ProLiant ML310 G2 All Models
|
Standard Memory - Pentium 4 Models
512 MB
PC3200 Unbuffered ECC DDR SDRAM installed (1 x 512 MB SDRAM DIMM)
Standard Memory Replaced with Optional Memory
Up
to 4096 MB memory is available with the optional installation of PC3200
Unbuffered ECC DDR SDRAM DIMM Memory kits.
|
|
These systems support PC3200
DDR memory and come standard with a single PC3200
DIMM installed.
The system board provides four DIMM sockets:
- Socket 1 (blue connector), channel A
- Socket 2 (black connector), channel A
- Socket 3 (blue connector), channel B
- Socket 4 (black connector), channel B
DIMMs do not need to be installed in pairs although
installation of pairs (an equal DIMM for each channel) provides the best
performance. The BIOS will detect the DIMM population and set the system
accordingly as follows:
- Single-channel mode - DIMMs installed for one channel
only
- Dual-channel asymmetric mode - DIMMs installed for
both channels but of unequal channel capacities.
- Dual-channel interleaved mode (recommended) - DIMMs
installed for both channels and offering equal channel capacities, proving
the highest performance.
These systems require DIMMs with the following parameters:
- Unbuffered
- 256 MB, 512 MB, and 1 GB memory technology
- PC3200
- ECC DIMMs only
The first DIMM should be installed in Socket 1. A DIMM
should not be installed in Socket 2 without a DIMM in Socket. Likewise
a DIMM should not be installed in Socket 4 without a DIMM in Socket 3.
A DIMM need not be installed in Socket 2 in order to install a DIMM in
Socket 3.
The table below shows some of the suggested memory configurations
for these systems.
NOTE: Table below does not list all
possible configurations. Balanced-capacity, dual-channel loading yields
best performance.
|
Channel A
|
Channel B
|
Total
|
Mode
|
Socket 1 |
Socket 2 |
Socket 3
|
Socket 4
|
256 MB
|
none
|
none
|
none
|
256 MB
|
Single-channel
|
256 MB
|
none
|
256 MB
|
none
|
512 MB
|
Dual-channel interleaved
|
512 MB
|
none
|
none
|
none
|
512 MB
|
Single-channel
|
512 MB
|
none
|
512 MB
|
none
|
1 GB
|
Dual-channel interleaved
|
1 GB
|
none
|
none
|
none
|
1 GB
|
Single-channel
|
1 GB
|
none
|
1 GB
|
none
|
2 GB
|
Dual-channel interleaved
|
1 GB
|
1-GB
|
1 GB
|
none
|
3 GB
|
Dual-channel asymmetric
|
1 GB
|
1-GB
|
1 GB
|
1 GB
|
4 GB
|
Dual-channel interleaved
|
Storage
| A,
| 48x IDE (ATAPI) CD-ROM |
B, C |
Removable Media Bays (1.6" each) |
0, 1, 2, 3 | Four Non-Hot Plug
Drive Bays, or Four Hot Plug Drive Bays | | |
| Drive
Support | |
|
Quantity Supported |
Position Supported |
Controller
|
Removable Media |
| |
| 1.44-MB Diskette
Drive | Up to 1 |
A,
B, or C |
Integrated |
IDE (ATAPI) CD-ROM Drive | Up
to 2 |
A,
B, or C |
Integrated
IDE (ATAPI) | DVD-ROM
Drive Option Kit | Up
to 2 |
A,
B, or C |
Integrated
IDE (ATAPI) |
|
Hard Drives | Ultra320
SCSI - Non-Hot Plug (Non-Hot Plug SCSI models only) |
| Quantity Supported |
Position Supported |
Controller
| 36.4GB
U320 15K 72.8GB U320 15K 146.8GB U320 15K
| Up
to 4 | 0,1, 2, or 3 |
Single Channel Ultra320 SCSI Adapter (SCSI Models) Smart Array 6402/128
Controller Smart Array 6404/256 Controller Smart Array 641 Controller
Smart Array 642 Controller 64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter |
|
Ultra320 SCSI -Hot Plug (Hot Plug
SCSI models only) |
| Quantity Supported |
Position Supported |
Controller
|
300GB U320 10K 146.8GB U320 10K 72.8GB U320 10K 146.8GB U320 15K 72.8GB
U320 15K 36.4GB U320 15K | Up
to 4 | 0,1, 2, or 3 | Single
Channel Ultra320 SCSI Adapter (SCSI Models) Smart Array 6404/256 Controller
Smart Array 6404/256 Controller Smart Array 641 Controller Smart Array
642 Controller 64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter |
|
Hot Plug SAS - (Hot Plug
SATA/SAS Models Only) |
| Quantity Supported |
Position Supported |
Controller
|
36GB 3G SAS 15K 72GB 3G SAS 15K 146GB 3G SAS 15K | Up
to 4 | 0, 1, 2, 3 |
Smart
Array P600 Controller | NOTE:
Use of SAS hard drives in SATA/SAS models requires installation of the Smart Array
P600. |
| Hot Plug Serial
ATA - (Hot Plug SATA/SAS Models Only) | |
Quantity Supported |
Position Supported |
Controller
| 80GB
1.5G SATA 7.2K 160GB 1.5G SATA 7.2K 250GB 1.5G SATA 7.2K | Up
to 4* | 0,
1 | Integrated four port SATA
Controller with RAID 0/1 |
Up to 2* | 0,
1, 2, 3 | Integrated four port SATA
Controller with RAID 0/1 | Up
to 4 | 0, 1, 2, 3 | HP
6-port SATA RAID controller | *NOTE:
A maximum of two hard drives are supported when integrated RAID is enabled. Use
of hot plug SATA hard drives in positions 2 and/or 3 requires either a non-RAID
configuration or installation of the HP 6-port SATA RAID controller (P/N 372953-B21)
and the HP 4-port SATA/SAS target fan cable (P/N 389653-B21). NOTE:
Hot plug capability and drive LED status support requires installation of the
HP 6-port SATA RAID controller. |
| Non-Hot
Plug SATA - (Non-Hot Plug SATA models only) |
| Quantity Supported |
Position Supported |
Controller
|
80GB 1.5G SATA 7.2K 160GB 1.5G SATA 7.2K 250GB 1.5G SATA 7.2K | Up
to 2* | 0,
1 | Integrated four port SATA Controller |
Up to 4*
| 0, 1, 2, 3 | Integrated
four port SATA Controller with RAID 0/1 | Up
to 4* | 0,
1, 2, 3 | HP 6-port SATA RAID controller |
*NOTE: A maximum
of two hard drives are supported when integrated RAID is enabled. Use of non-hot
plug SATA hard drives in positions 2 and/or 3 requires either a non-RAID configuration
or installation of the HP 6-port SATA RAID controller (P/N 372953-B21) and two
of the HP 2-port SATA/SAS cables (P/N 379093-B21). NOTE: Drive LED
status support requires installation of the HP 6-port SATA RAID controller. |
|
External Storage
|
|
Quantity
Supported
|
Position
Supported
|
Host Controller or Adapter
|
Modular Smart Array 30 Family |
|
External |
Smart Array 642 Controller |
|
Maximum Storage Capacity - SATA Models
(SCSI Attached (Enclosure)) |
Internal | 1.0TB
(4 x 250GB) | External | 29.40TB
(14 x 300GB) x 7 (Requires additional SCSI controllers in slots) |
Total | 30.40TB |
|
Maximum Storage Capacity - SCSI Models
(SCSI Attached (Enclosure)) |
Internal | 1.2TB
(4 x 300GB hot-plug hard drives) | External | 29.40TB
(14 x 300GB) x 7 | Total | 30.60TB |
|
Tape
Drives, Tape Autoloaders & Tape Libraries |
NOTE: For an up-to-date listing of the latest
O/S Support details for each of the Tape Drives listed below, please see the following:
https://h18000.www1.hp.com/products/quickspecs/North_America/10233.html NOTE:
For an up-to-date listing of the latest O/S Support details for each of the
Tape Autoloaders and Tape Libraries listed below, please see the following:
https://h18000.www1.hp.com/products/quickspecs/North_America/10809.html NOTE:
For complete listing of tape drive offerings see https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html |
| Quantity
Supported | Position Supported |
Controller
|
HP StorageWorks Tape Drives, USB Internal DAT 40 USB DAT 72
USB | 1 | B,C |
Embedded USB port | | | | |
HP StorageWorks Tape Drives,
USB External DAT 24 USB DAT 40 USB DAT 72 USB | 1
per USB port | External | USB
port | | | | |
HP StorageWorks Tape Drives,
Internal Ultrium 232 Ultrium 448 Ultrium 460 Ultrium 960
DAT 40 DAT 72 DLT VS80 DLT VS160 SDLT 320 SDLT 600 | 1 |
B,C | 64-Bit/133MHz Dual Channel
Ultra320 SCSI Adapter 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| | | |
HP StorageWorks Tape Drives,
Internal Ultrium 232 Ultrium 448 Ultrium 460 Ultrium 960
DAT 40 DAT 72 DLT VS80 DLT VS160 SDLT 320 SDLT 600 | 1 |
B,C | 64-Bit/133MHz Dual Channel
Ultra320 SCSI Adapter 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| | | |
HP StorageWorks Tape Drives,
External Ultrium 960 SDLT 600 | 1
per SCSI Channel | External | 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter 64-Bit/133-MHz Single Channel Ultra320
SCSI HBA G2 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate
OS | | | | |
HP StorageWorks Autoloaders,
Internal DAT 72x6 Tape Autoloader | 1
| B,C | 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter 64-Bit/133-MHz Single Channel Ultra320
SCSI HBA G2 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate
OS | | | | |
HP StorageWorks Autoloaders,
External DAT 72x6 Tape Autoloader 1/8 Tape Autoloader | 1
autoloader per SCSI channel | External | 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter 64-Bit/133-MHz Single Channel Ultra320
SCSI HBA G2 64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate
OS | | | | |
HP StorageWorks Tape Libraries,
External MSL2024 (Ultrium 960-based) MSL2024 (Ultrium 448-based)
MSL6000 (Ultrium 960-based) MSL6000 (SDLT 600-based) MSL6000 (Ultrium
460-based) MSL5026S2 (SDLT 320-based) MSL5052S2 (SDLT 320-based)
| Please reference the
MSL Tape Library QuickSpecs to determine configuration requirements | External | Please
consult the EBS connectivity matrix at https://www.hp.com/go/ebs
for detailed connectivity information. |
Quickspecs
System Unit | Dimensions
(HxWxD) |
17.0 x 7-7/8 x 22
in (43.0 x 20.0 x 55.0 cm) |
Weight(approximate) |
37 lb (16.8 kg) |
|
Input Requirements
(per power supply) | Range Line
Voltage | 100-127V and 200-240V |
Normal Line Voltage | 115
to 230 VAC | Line
Frequency | 50 to 60 Hz | |
Rated Input Current | <
6A RMS at 90VAC with maximum load | BTU
Rating | 1,560 BTU |
| SCSI
Connectors (SCSI Models only) | One
internal HD68 connectors | NOTE:
Support for either one internal or one external SCSI channel is available.
This is achieved using an internal to external SCSI cable option kit (PN 159547-B22)
and SCSI knockout bracket. | Power
Supply Output Power | Rated
Steady-State Power |
350W |
Maximum Peak Power |
370W |
Temperature Range | Operating | 50°
to 93° F (10° to 35° C) | Shipping | -40°
to 150° F (-40° to 66° C) | Relative
Humidity (non-condensing) | Operating | 20%
to 80% | Non-operating | 5%
to 90% | Acoustic
Noise | Idle (Fixed Disk
Drives Spinning) | |
L WAd
(BELS) |
5.7 |
L pAm
(dBA) |
40 |
Operating (Random
Seeks to Fixed Disks) | |
L
WAd (BELS) |
5.7 |
L
pAm (dBA) |
40 |
|
Non-Hot Plug Wide
Ultra320 SCSI Hard Drives |
36.4 GB 15K |
Capacity |
36419.2 MB |
357012-B21 |
Height |
1 in (2.54 cm) |
|
Width |
4 in (10.16 cm) |
|
Interface |
Ultra320 SCSI |
|
Transfer Rate Synchronous
(Maximum) |
320 MB/s |
|
Seek Time
(typical reads, including settling) |
Single Track |
0.4 ms
|
Average |
3.8 ms
|
Full-Stroke |
8 ms
|
Rotational |
15,000 rpm |
|
Physical Configuration |
Bytes/Sector
|
512 |
Logical Blocks |
71,132,000 |
|
Operating Temperature |
50° to 95°
F (10° to 35° C) |
|
Non-Hot Plug SATA/100
Hard Drives
|
80 GB 7.2K
|
Capacity |
80,000 MB |
383410-B21 |
Height |
1.028 in/2.611cm |
|
Width |
4.0 in/10.16 cm |
|
Interface |
Serial ATA |
|
Transfer Rate Synchronous
(Maximum) |
1.5 Gb/s |
|
Seek Time
(typical reads, including settling) |
Single Track |
0.9 ms |
Average |
9.0 ms |
Full-Stroke |
17.0 ms |
Rotational |
7,200 rpm |
|
Physical Configuration |
Bytes/Sector
|
512 |
Logical Blocks |
156,301,488 |
|
Operating Temperature |
41° to 131°
F (5° to 55° C) |
|
48X Max IDE (ATAPI) CD-ROM Drive |
Disk | Applicable
Disk | CD-ROM, CD-XA, CD-DA (Mode
1, Mode 2, Form 1 and 2) |
| Photo CD (Single and Multi-session) |
| Mixed
Mode (Audio and Data combined) |
| | CD-R |
|
Capacity | 540 MB (Mode 1,
12 cm) | |
| 650 MB (Mode 2, 12 cm) |
Block Size |
Mode 1 | 2,048 bytes |
|
Mode 2 | 2,340 bytes, 2,336
bytes | |
CD-DA | 2,352 bytes |
| CD-XA | 2,328
bytes | Interface |
IDE (ATAPI) | |
Access Times (typical) |
Random | <100 ms |
Full-Stroke | <150
ms | Data
Transfer Rate | Sustained | 3000
to 7750 KB/s (20X to 48X) | Burst | 150
KBps to 7,200 KBps | Bus
Rate | 16.7 MBps |
Cache Buffer |
128 KB | |
Start-up Time (typical) |
< 7seconds | |
Stop Time | <
4seconds | |
Laser Parameters | Type | Semiconductor
Laser GaA1As | Wave
Length | 780 ± 25 nm |
Operating Conditions |
Temperature | 41° to 113°
F (5° to 45° C) |
Humidity | 10% to 80% |
Dimensions |
(HxWxD, maximum) | 1.7
x 5.85 x 8.11 in (4.29 x 14.86 x 20.60 cm) |
| Weight | 2.09
lb (0.95 kg) |
|
Embedded NC7761 PCI 10/100/1000T Gigabit network adapter
|
Network Interface |
10Base-T/100Base-TX/1000Base-TX |
Compatibility |
IEEE 802.3 10Base-T |
IEEE 802.3ab 1000Base-T |
IEEE 802.3u 100Base-TX |
Data Transfer Method |
32-bit bus-master PCI |
Network Transfer Rate |
10Base-T(Half-Duplex) |
10 Mb/s |
10Base-T(Full-Duplex) |
20 Mb/s |
100Base-TX(Half-Duplex) |
100 Mb/s |
100Base-TX(Full-Duplex) |
200 Mb/s |
1000Base-TX (Half and Full-Duplex) |
2000Mb/s |
Connector |
RJ-45 |
Cable Support |
10Base-T |
Categories 3, 4 or 5 UTP; up to
328 ft (100 m) |
10/100/1000Base-TX |
Category 5 UTP; up to 328 ft (100
m) |
|
Integrated 4 Channel SATA Controller
(SATA NHP Models only)
|
Drives Supported |
Up to 4 SATA hard drives (1 drive/channel) |
Channels |
4 |
Storage Capacity |
1 TB |
Maximum SATA Channel Transfer Rate |
150 MB/s per channel |
SATA Protocols |
SATA-1a |
Internal SATA Connectors |
One 4-lane connector (all four channels) |
|
|
|
|
Single Channel Ultra320 SCSI Adapter
(SCSI Models only)
|
Drives Supported |
Up to 15 SCSI devices Wide |
Data Transfer Method |
64-bit/100-MHz PCI bus-master |
SCSI Channel Transfer Rate |
320 MB/s per channel |
Maximum Transfer Rate per PCI
Bus (peak) |
1033 MB/s per channel
|
SCSI Protocols |
Ultra320, Wide Ultra3, Wide Ultra2,
Wide Ultra SCSI-3, Fast-Wide SCSI-2, and Fast SCSI-2 |
Fast SCSI-2 |
Electrical Protocol |
Low Voltage Differential (LVD) |
SCSI Termination |
Active Termination |
External SCSI Connectors |
None. |
NOTE: To implement
an external SCSI connection, install an optional controller or internal
to external SCSI option kit (part number 159547-B22 for HD68 or 333370-B21
for VHDCI). |
Internal SCSI Connectors |
One 68-Pin Wide Ultra SCSI-3 connectors |
|
|
|
|
|