• Support for SAS/SATA Hot Plug and Non-Hot Plug Hard Drives

• Processor:
  • Quad-Core Intel® Xeon® processor E5400 sequence
  • Dual-Core Intel® Xeon® processor E5200 sequence
  • Intel® 5100 chipset
  • 1066 MHz or 1333MHz Front Side Bus
• Memory:
• PC2-5300 Registered Buffered DIMMs (DDR2-667) Memory
• 1 or 2 GB standard
• 16 GB maximum
• Storage Controller:
• HP Embedded SATA RAID Controller (RAID 0,1,10)
• SAS Model: HP SAS SC40Ge PCI Express to 4-Port SATA/SAS HBA Controller
  NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
• Performance Model: HP Smart Array E200/128 BBWC SATA/SAS Controller
• Internal Drive Support:
• Internal SAS storage capacity of up to 8.0TB (8 x 1TB SAS drives)
• Internal SATA storage capacity of up to 8.0TB (8 x 1TB SATA drives)
• Supports up to Eight (8) SAS/SATA hard drives via HBA or RAID Controller
• Network Controller:
• Embedded HP NC105i PCI Express Gigabit Server Adapter
• Expansion Slots:
• Six expansion slots: Two (2) PCI-Express x8, Three (3) PCI-Express x4(x8 connector) and One (1) PCI (32-bit/33MHz). One slot designated for optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
• USB Ports:
• Eight (8) USB 2.0 ports:- 4 rear, 2 front, 2 Internal(1 standard and 1HP 5-pin)
• Power Supply:
• One 650W Single Non-Redundant Power Supply
• 750W Redundant Power Supply(Optional)
• Form Factor:
• 5U Tower Models. Rack models optional HP Tower to Rack Conversion Tray, Universal Kit
• Management:
• Optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
• Deployment/Serviceability:
• Easy chassis entry and component access
• Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
• This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. SATA hard drives have a one year warranty.
  NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86/x64 based Systems
NetWare

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging to meet customer needs. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services on your specific server model please contact your sales representative or go to: https://www.hp.com/go/factory-express.

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

• Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
  
• Deployment Service – Hardware Installation only

Enhanced Service – Optimize service level to increase IT performance and availability

• Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
• Deployment Service – Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://www.hp.com/go/proliant/carepack

Performance Model

HP ML150G5 E5410 HP SATA/SAS, 2GB, (1P)
450164-001

Base Model

HP ML150G5 E5405 HP SATA/SAS, 2GB (1P)
450163-001

HP ML150G5 E5205 NHP 160GB SATA, 1GB, (1P)
450161-001

HP ML150G5 E5405 NHP 160GB SATA, 1GB, (1P)
450162-001

S-BUY ML150T05 E5205 NHP
463457-005

S-BUY ML150T05 E5410 NHP
459655-005

S-BUY ML150T05 E5430 NHP
470064-898

S-BUY ML150T05 E5430 SBS NHP
470064-899

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.

HP SC11Xe Host Bus Adapter

L WAd (BELS)

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.