HP Proliant ML110 G5 Quickspecs

DL QuickSpecs

DL20

DL20 G9

DL20 G10

DL60

DL60 G9

DL80

DL80 G9

DL120

DL120 G5

DL120 G6

DL120 G7

DL120 G9

DL140

DL140 G2

DL140 G3

DL145

DL145 G1

DL145 G2

DL145 G3

DL160

DL160 G5

DL160 G5p

DL160 G6

DL160 G8

DL160 G9

DL160 G10

DL160se

DL160se G6

DL165

DL165 G5

DL165 G5p

DL165 G6

DL165 G7

DL180

DL180 G5

DL180 G6

DL180 G9

DL185

DL185 G5

DL320

DL320 G1

DL320 G2

DL320 G3

DL320 G4

DL320 G5

DL320 G6

DL325

DL325 G10+

DL345

DL345 G10+

DL360

DL360 G1

DL360 G2

DL360 G3

DL360 G4

DL360 G4p

DL360 G5

DL360 G6

DL360 G7

DL360 G8e

DL360 G8p

DL360 G9

DL360 G10

DL360 G10+

DL365

DL365 G1

DL365 G5

DL365 G10+

DL380

DL380 G1

DL380 G2

DL380 G3

DL380 G4

DL380 G5

DL380 G6

DL380 G7

DL380 G8e

DL380 G8p

DL380 G9

DL380 G10

DL380 G10+

DL385

DL385 G1

DL385 G2

DL385 G5

DL385 G5p

DL385 G6

DL385 G7

DL385p G8

DL385 G10

DL385 G10+

DL388

DL388 G9

DL560

DL560 G1

DL560 G8

DL560 G9

DL560 G10

DL580

DL580 G1

DL580 G2

DL580 G3

DL580 G4

DL580 G5

DL580 G7

DL580 G8

DL580 G9

DL580 G10

DL585

DL585 G1

DL585 G2

DL585 G5

DL585 G6

DL585 G7

DL740

DL740 G1

DL760

DL760 G1

DL760 G2

DL785

DL785 G5

DL785 G6

DL1000

DL1000

ML QuickSpecs

ML30

ML30 G9

ML110

ML110 G1

ML110 G2

ML110 G3

ML110 G4

ML110 G5

ML110 G6

ML110 G7

ML110 G9

ML110 G10

ML115

ML115 G1

ML115 G5

ML150

ML150 G2

ML150 G3

ML150 G5

ML150 G6

ML150 G9

ML310

ML310 G1

ML310 G2

ML310 G3

ML310 G4

ML310 G5

ML310 G5p

ML310 G8e

ML330

ML330 G1

ML330 G2

ML330 G3

ML350

ML350 G1

ML350 G2

ML350 G3

ML350 G4

ML350 G4p

ML350 G5

ML350 G6

ML350 G8e

ML350 G8p

ML350 G9

ML350 G10

ML370

ML370 G1

ML370 G2

ML370 G3

ML370 G4

ML370 G5

ML370 G6

ML530

ML530 G1

ML530 G2

ML570

ML570 G1

ML570 G2

ML570 G3

ML570 G4

ML750

ML750 G1

BL QuickSpecs

BL10e

BL10e G2

BL20p

BL20p G3

BL20p G4

BL25p

BL25p G1

BL260c

BL260c G5

BL280c

BL280c G6

BL2x220c

BL2x220c G5

BL2x220c G7

BL30p

BL30p G1

BL35p

BL35p G1

BL40p

BL40p G1

BL420c

BL420c G8

BL45p

BL45p G1

BL45p G2

BL460c

BL460c G1

BL460c G6

BL460c G7

BL460c G8

BL460c G9

BL460c G10

BL465c

BL465 G1

BL465c G5

BL465c G6

BL465c G7

BL465c G8

BL480c

BL480c G1

BL495c

BL495c G5

BL495c G6

BL60p

BL60p G1

BL620c

BL620c G7

BL660c

BL660c G8

BL660c G9

BL680c

BL680c G5

BL680c G7

BL685c

BL685c G1

BL685c G5

BL685c G6

BL685c G7

BL860c

BL860cG1

SL QuickSpecs

SL160z

SL160z G6

SL165z

SL165z G6

SL165z G7

SL170s

SL170s G6

SL170z

SL170z G6

SL230s

SL230s G8

SL250s

SL250s G8

SL270s

SL270s G8

SL2x170z

SL2x170z G6

SL335s

SL335s G7

SL390s

SL390s G7

SL4540

SL4540 G8

SL4545

SL4545 G7

XL QuickSpecs

XL170r

XL170r G9

XL190r

XL190r G9

XL220a

XL220a G9

XL230a

XL230a G9

XL730f

XL730f G9

XL740f

XL740f G9

XL750f

XL750f G9

CL QuickSpecs

CL1850

CL1850 G1

CL380

CL380 G1

Proliant ML110 G5 QuickSpecs

US QuickSpecs

ML110 G5 Hard Drives	ML110 G5 Processors	ML110 G5 Memory
ML110 G5 Controllers	ML110 G5 Networking	ML110 G5 Power Supplies
ML110 G5 Quickspecs	ML110 G5 Quickspecs-Options	ML110 G5 Options New Refurbished

Proliant ML110 G5 Overview

HP ProLiant ML110 Generation 5 (G5)

Proliant ML110 G5 Front View:		Proliant ML110 G5 Rear View:
1.	DVD-ROM Drive	1.	Rear System Fan
2.	Power LED	2.	PCI Slot Cover Retainer
3.	Drive Activity LED	3.	PCI Slot Covers
4.	Front Bezel	4.	HP ProLiant 100 G5 Lights-Out 100c Management Card Port (Optional)
5.	SAS Cable (SAS model only)	5.	LAN Port (RJ-45)
6.	Hard Drive Controller Card (Optional)	6.	Rear USB 2.0 Ports
7.	System Board	7.	Serial Port
8.	HP ProLiant 100 G5 Lights-Out 100c Management Card Port (Optional)	8.	VGA Port
8.		9.	PS/2 Keyboard Port
9.	System Fan	10.	PS/2 Mouse Port
10.	365W Power Supply	11.	Power Supply Outlet
		12.	Power Supply Unit (PSU) Fan

What's New

The HP ProLiant ML110 G5 is now available with higher performance processors (quad-core up to 3.0GHz and dual-core up to 3.16GHz) resulting in better processing power and increased productivity for the growing businesses.

Support for SATA Non-Hot Plug Entry and Midline Hard Drives

At A Glance

Processor:
- Intel® Xeon® processor 3300 series
- Intel® Xeon® processor 3200 series
- Intel® Xeon® processor 3100 series
- Intel® Core™ 2 Duo processor 7000 series
- Intel® Pentium® processor 2000 series
- Intel® Celeron® processor 400 series
Memory: o Four (4) DIMM slots
- Four (4) DIMM slots
- 1GB Standard/8GB Maximum of PC2-6400 Unbuffered DDR2 ECC 800 MHz
Storage Controller:

SATA Models: Integrated 6 ports SATA controller with embedded RAID (4 ports available for hard disks)
NOTE: Transfer rate: 3 Gb/s SATA.
SAS Models: HP SC40Ge Host Bus Adapter with RAID 0, 1 support, FIO
NOTE: When using the SC40Ge with SATA hard drives, 1.5G SATA hard drives are required.
NOTE: Transfer rate: 3 Gb/s SATA.

Internal Drive Support:

4 HDD Support:
- Internal SAS storage capacity of up to 1.8TB (4 x 450GB 3.5" SAS drives)
- Internal SATA storage capacity of up to 8.0TB (4 x 2TB 3.5" SATA drives)

Network Controller:

Embedded NC105i PCI Express Gigabit Ethernet Server Adapter

Expansion Slots:

Slot 1: PCI 32-bit/33MHz at 3.3V
Slot 2: PCI-Express x8 connector with x1 link
Slot 3: PCI-Express x8 connector with x1 link
Slot 4: PCI-Express x8 connector with x8 link

USB 2.0 Ports:

Eight (8) USB 2.0: 2 front, 4 rear, 2 internal (one for tape, one for standard USB device)

Management:

Standard Lights Out 100 IPMI 2.0 reporting
Optional HP ProLiant 100 G5 Lights Out 100c Remote Management Card
Standard HP ProLiant ML110 G5 Easy Set-up CD

Form Factor:

Micro ATX tower (4U)

Warranty:

This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair are available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes 1 year parts, 1 year labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Standard Features

Processor One of the following depending on Model	Quad-Core Processors
	Intel® Xeon® processor X3370 (3.00 GHz, 95W, 1333MHz FSB, 12MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
	Intel® Xeon® processor X3360 (2.83 GHz, 95W, 1333MHz FSB, 12MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
	Intel® Xeon® processor X3330 (2.66 GHz, 95W, 1333MHz FSB, 6MB)
	Intel® Xeon® Processor X3220 (2.40 GHz, 95W, 1066MHz FSB, 8MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
	Intel® Xeon ® Processor X3210 (2.13 GHz, 95W, 1066MHz FSB, 8MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
	Dual-Core Processors
	Intel® Xeon® processor E3120 (3.16 GHz, 65W, 1333MHz FSB, 6MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
	Intel® Xeon® processor E3110 (3.00 GHz, 65W, 1333MHz FSB, 6MB)
	Intel® Core™ 2® processor E7400 (2.80 GHz, 65W, 1066MHz FSB, 3MB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.
	Intel® Pentium® processor E2160 (1.80 GHz, 65W, 800MHz FSB, 1MB)
	Single-Core Processors
	Intel® Celeron® processor 440 (2.0 GHz, 35W, 800MHz FSB, 512KB) NOTE: Available through Configure To Order only. See Factory Integration Models section for more details.

Cache Memory One of the following depending on Model	12 MB Level 2 cache - Xeon X3370, X3360
	8 MB Level 2 cache - Xeon X3220, X3210
	6 MB Level 2 cache - Xeon X3330, E3120, E3110
	3 MB Level 2 cache - Core2 E7400
	1 MB Level 2 cache - Pentium E2160
	512KB Level 2 cache - Celeron 440

Chipset	Intel® 3200

Memory Protection	ECC

ML110 G5 Memory	Type	PC2-6400 unbuffered DDR2 ECC 800MHz
	Standard	1 GB
	Maximum	8 GB

Network Controller	Embedded NC105i PCI Express Gigabit Ethernet Server Adapter

Expansion Slots #	Technology	Bus Width***	Connector Width	Bus Number*	Device Number**	Form Factor	Notes
1	PCI	32-bit	N/A	0	30	Full height slot	33MHz/3.3V
2	PCIe	X1	X8	0	28	Full height slot
3	PCIe	X1	X8	2	28	Full length, full height slot
4	PCIe	X8	X8	0	1	Full length, full height slot
Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number. * Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with the lowest bus). * Indicates the number of physical electrical lanes running to a PCI-e connector. NOTE:** PCI-X Interface (PCI 32bit/33MHz compatible)

Storage Controller	SATA Models	Integrated 6 ports SATA controller with embedded RAID (4 ports available for Hard Disks) NOTE: Transfer rate: 3 Gb/s SATA.

Storage	Optical Drive	SATA DVD-ROM Drive
	Hard Drives	(SATA Model only)	160GB SATA 7750 rpm Drive

Maximum Internal Storage	Type
	Non-Hot Plug SAS	1.8TB	(4 x 450GB)
	Non-Hot Plug SATA	8.0TB	(4 x 2TB)

Interfaces	Parallel	0
	Serial	1
	Pointing Device (Mouse, PS2)	1
	Graphics	1
	Keyboard (PS2)	1
	USB 2.0 Ports	8 total (4 rear, 2 front panel, 2 internal (one for USB Tape connectivity)) NOTE: Internal USB ports are optimal for the attachment of HP USB DAT Tape Drives NOTE: Please see the following URL for additional information regarding USB support: https://h18004.www1.hp.com/products/servers/platforms/usb-support.html
	Network RJ-45 (Ethernet)	1
	Management	HP ProLiant 100 G5 Lights-Out 100c Remote Management port (Optional)

Graphics	32MB shared supporting 1600 x 1200 x 16M resolution

Form Factor	Micro ATX Tower (4U)

Remote Management	Lights-Out 100c	Lights Out LO100c is a Remote Management Card (RMC) for ProLiant 100 series servers that do not have embedded LO100i. The LO100c has all the features of the LO100i Advanced license and allows customers, or their service providers, to remotely manage ProLiant servers over a LAN or the Internet from anywhere, anytime regardless whether the server is located in the same building, across town, or around the globe. With LO100c, users can acquire complete remote control with Virtual KVM (graphical hardware-based, remote console). Users can also access the server's serial console, control system power, update system firmware and software, as well as monitor system environmental conditions. The LO100c remote management card can be accessed from a web browser or command line interface. This virtual "at-the-server" functionality means administrators stay in control of remote HP ProLiant 100 series servers. The HP Lights-Out100c consists of a management processor and firmware that provides cost-effective, entry-level lights-out functionality, basic system board management functions, and diagnostics.
		NOTE: For more information, please refer to the QuickSpecs for the LO100c found at:: https://h18004.www1.hp.com/products/servers/ management/remotemgmt/lightsout100/index.html

Core Infrastructure Management

HP ProLiant ML110 G5 Easy Set-up CD

The HP ProLiant Easy Set-up CDs optimize single-server setup, providing a simple way to deploy reliable and consistent server configurations. The HP ProLiant 100 Series Easy Set-up CD ship standard with the ML110 G5.

It offers essential single-server deployment tools for HP ProLiant 100 series servers that simplify HP entry server setup, providing a repeatable way to deploy reliable and consistent single-server configurations. The HP ProLiant Easy Set-up CDs assist with the OS installation process by preparing the system for installing "off-the-shelf" versions of Windows operating system software and automatically integrating optimized HP ProLiant server software drivers and utilities. Users enjoy the following benefits:

An easy-to-use, intuitive graphical interface that prepares your system for the OS installation process.
Integration of key server software drivers with assisted installation.
Dependency and validity checks to ensure that all supported ProLiant software can be installed.

NOTE: For the latest information about other related software; please visit the HP Insight Control Management Software Portfolio at: https://h18004.www1.hp.com/products/servers/management/ and the HP ProLiant Easy Set-up CD Web site at: www.hp.com/servers/easysetup

Industry Standard Compliance	ACPI V3.0a Compliant
	PCI 2.3 Compliant
	PXE Support
	WOL Support
	IPMI 2.0 compliance
	Microsoft® Logo certifications
	RedHat Enterprise Linux Logo certifications
	SUSE Linux Enterprise Server Logo certifications
	USB 2.0

Manageability	Standard Lights Out 100 IPMI 2.0 reporting
	Optional HP ProLiant 100 G5 Lights-Out 100c Remote Management Card
	Standard HP ProLiant ML110 G5 Easy Set-Up CD

Security	Power-on password
	Setup password
	USB lock

Server Power Cords	6' lowline NEMA power cord.

Power Supply	365 Watts

System Fans	1 – non-redundant system fan shipped standard
	1 – non-redundant CPU heatsink fan shipped standard

Operating Systems and Virtualization Software Support for ProLiant Servers	Microsoft Windows Server Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Netware
	NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: https://www.hp.com/go/supportos and our driver download page https://www.hp.com/support/ML110G5

Factory Express Portfolio for Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and/or storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers, as well as, the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to https://www.hp.com/go/factory-express.

HP Enterprise Configurator	The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. https://www.hp.com/products/configurator.

Service and Support

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

Support Service – 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service – Hardware Installation only

Enhanced Service – Optimize service level to increase IT performance and availability

Support Service – 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service – Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html

Models

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see "Configuration Information - Factory Integrated Models" section".
SATA Models
HP ML110 G5 X3330 NHP-SATA 495124-001	Processor(s)	(1) Intel® Xeon® processor X3330 (2.66 GHz, 95W, 1333MHz FSB, 6MB)
	Cache Memory	6MB (2 x 3MB) Level 2 cache
	Memory	1GB PC2-6400 UB ECC (DDR2-800MHz) (1 x 1GB)
	Storage Controller	HP Embedded 6 Port SATA Controller with Embedded RAID (4 ports for HDD)
	Hard Drive	1 x 160GB 3.5-inch Non-hot-plug LFF SATA
	Internal Storage	Non-Hot Plug LFF SATA: Maximum 8.0TB (4 x 2TB)
	Optical Drive	Half-Height 16x SATA DVD-ROM
	Form Factor	Micro ATX Tower (4U)

HP ML110 G5 E3110 NHP SATA 533548-001	Processor(s)	(1) Intel® Xeon® processor E3110 (3.00 GHz, 65W, 1333MHz FSB, 6MB)
	Cache Memory	6MB (2 x 3MB) Level 2 cache
	Memory	1GB PC2-6400 UB ECC (DDR2- 800 MHz) (1x1GB)
	Storage Controller	HP Embedded 6 Port SATA Controller with Embedded RAID (4 ports for HDD)
	Hard Drive	1 x 160GB 3.5-inch Non-hot-plug LFF SATA
	Internal Storage	Non-Hot Plug LFF SATA: Maximum 8.0TB (4 x 2TB)
	Optical Drive	Half-Height 16x SATA DVD-ROM
	Form Factor	Micro ATX Tower (4U)

HP ML110 G5 Pentium E2160 NHP-SATA 444809-001	Processor(s)	(1) Intel® Pentium® processor E2160 (1.8GHz, 65W, 800MHz FSB, 1MB)
	Cache Memory	1MB (1 x 1MB) Level 2 cache
	Memory	1GB PC2-6400 UB ECC (DDR2-800MHz) (1 x 1GB)
	Storage Controller	HP Embedded 6 Port SATA Controller with Embedded RAID (4 ports for HDD)
	Hard Drive	1 x 160GB 3.5-inch Non-hot-plug LFF SATA
	Internal Storage	Non-Hot Plug LFF SATA: Maximum 8.0TB (4 x 2TB)
	Optical Drive	Half-Height 16x SATA DVD-ROM
	Form Factor	Micro ATX Tower (4U)

Smart Buys

The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind, offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only.

S-Buy ML110G5 X3075 160 SATA 455946-005	Processor(s)	(1) Dual-Core Intel Xeon 3075 (2.66 GHz, 1333 FSB, 4M)
	Cache Memory	1 x 4MB Level 2 cache
	Memory	1 GB PC2-6400 ECC (DDR2-800Mhz) (1 x 1GB)
	Storage Controller	HP Embedded 6 Port SATA Controller with embedded RAID (4 ports for HDD)
	Hard Drive	(1) 160GB SATA 7.2K 3.5"
	Internal Storage	Maximum 3.0TB (4 x 750GB) SATA
	Optical Drive	16x DVD-RW Drive
	Form Factor	Micro ATX Tower

S-Buy ML110G5 X3075 SBS 160 SATA 455947-005	Processor(s)	(1) Dual-Core Intel Xeon 3075 (2.66 GHz, 1333 FSB, 4M)
	Cache Memory	1 x 4MB Level 2 cache
	Memory	1 GB PC2-6400 ECC (DDR2-800Mhz) (1 x 1GB)
	Storage Controller	HP Embedded 6 Port SATA Controller with embedded RAID (4 ports for HDD)
	Hard Drive	(2) 160GB SATA 7.2K 3.5
	Operating System	Microsoft Windows Small Business Server 2003 R2 Standard Edition with 5 CALs
	Internal Storage	Maximum 3.0TB (4 x 750GB) SATA
	Optical Drive	16x DVD-RW Drive
	Form Factor	Micro ATX Tower

S-Buy ML110G5 E4600 SATA 470064-777	Processor(s)	(1) Dual-Core Intel® Core 2 Processor E4600 (2.40 GHz, 65W, 800 FSB, 2M)
	Cache Memory	2 MB Level 2 cache
	Memory	1 GB PC2-6400 ECC (DDR2-800Mhz) (1 x 1GB)
	Storage Controller	HP Embedded 6 Port SATA Controller with embedded RAID (4 ports for HDD)
	Hard Drive	(1) 160GB SATA 7.2K 3.5"
	Internal Storage	Maximum 3.0TB (4 x 750GB) SATA
	Optical Drive	DVD-ROM Drive
	Form Factor	Micro ATX Tower

S-Buy ML110G5 E3110 SATA 470064-958	Processor(s)	(1) Dual-Core Intel® Xeon® Processor E3110 (3.00 GHz, 65W, 1333 MHz FSB, 6M)
	Cache Memory	6 MB Level 2 cache
	Memory	2 GB PC2-6400 (1 x 2GB) ECC DIMM
	Storage Controller	HP Embedded 6 Port SATA Controller with embedded RAID (4 ports for HDD)
	Hard Drive	(1) 250GB SATA 7.2K 3.5" NDL HDD
	Internal Storage	Maximum 3.0TB (4 x 750GB) SATA
	Optical Drive	16x DVD-RW Drive
	Form Factor	Micro ATX Tower

S-Buy ML110G5 E3120 SATA 470064-964	Processor(s)	(1) Dual-Core Intel® Xeon® Processor E3120 (3.16 GHz, 65W, 1333 MHz FSB, 6M)
	Cache Memory	6 MB Level 2 cache
	Memory	2 GB PC2-6400 (1 x 2GB) ECC DDR2
	Storage Controller	HP Embedded 6 Port SATA Controller with embedded RAID (4 ports for HDD)
	Hard Drive	(2) 250GB SATA 7.2K 3.5" MDL HDD
	Internal Storage	Maximum 3.0TB (4 x 750GB) SATA
	Optical Drive	16x DVD-RW Drive
	Form Factor	Micro ATX Tower

S-Buy ML110G5 X3330 250GB SATA 495550-005	Processor(s)	(1) Quad Core Intel® Xeon® Processor X3330 (2.66 GHz, 95W, 1333 MHz FSB, 6M)
	Cache Memory	6 MB Level 2 cache
	Memory	2 GB PC2-6400 (1 x 2GB) DDR2
	Storage Controller	HP Embedded SATA RAID
	Hard Drive	(1) 250GB SATA 7.2K 3.5"
	Internal Storage	Maximum 3.0TB (4 x 750GB) SATA
	Optical Drive	16x DVD-RW Drive
	Form Factor	Micro ATX Tower

Configuration Information-Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration
Models	HP ProLiant ML110G5 NHP CTO Chassis	445607-B21
	Factory Integrated Models ship with:
	Embedded NC105i PCI Express Gigabit Ethernet Server Adapter
	Keyboard and Mouse NOTE: Keyboard and Mouse option needs to be manually selected for shipment. Please see the USB Options listed in the options selection of this QuickSpecs.
	Power cord
	Micro ATX Tower (4U)
	NOTE: HP SATA drive models are limited to 4.0TB support.
	NOTE: On SATA models with embedded RAID, setup instructions are located in the User Guide. CTO RAID set-up is not available. HP ProLiant ML100 Series Server User Guide: https://h20000.www2.hp.com/bc/docs/support/SupportManual/c00260539/ c00260539.pdf

Step 2: Choose Required Options (only one of the following from each list unless otherwise noted)
HP Processors	Quad-Core Processor
	Intel® Xeon® processor X3370 (3.00GHz, 95W, 1333MHz FSB, 12MB), FIO	535026-B21
	Intel® Xeon® processor X3360 (2.83GHz, 95W, 1333MHz FSB, 12MB), FIO	493261-B21
	Intel® Xeon® processor X3330 (2.66 GHz, 95W, 1333 MHz FSB, 6MB), FIO	493259-B21
	Intel® Xeon® Processor X3220 (2.40 GHz, 95W, 1066 MHz FSB, 8MB), FIO	455069-B21
	Intel® Xeon® Processor X3210 (2.13 GHz, 95W, 1066 MHz FSB, 8MB), FIO	455068-B21
	Dual-Core Processor
	Intel® Xeon® processor E3120 (3.16 GHz, 65W, 1333 MHz FSB, 6MB), FIO	492973-B21
	Intel® Xeon® processor E3110 (3.00 GHz, 65W, 1333 MHz FSB,6MB),FIO	464376-B21
	Intel® Core™ 2® processor E7400 (2.80 GHz, 65W, 1066MHz FSB, 3MB), FIO	533838-B21
	Intel® Pentium® processor E2160 (1.8GHz, 65W, 800 MHz FSB, 1MB), FIO	450359-B21
	Single-Core Processor
	Intel® Celeron® processor 440 (2.0GHz, 35W, 800 MHz FSB, 512KB), FIO	455072-B21

HP Memory	HP 2GB (1x2GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit	450260-B21
	HP 1GB (1x1GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit	450259-B21

HP Optical Drives	HP Half-Height SATA DVD ROM Kit	447326-B21
	HP Half-Height SATA DVD-RW Optical Kit	447328-B21

HP Hard Drives	NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; please refer to the specific hard drive QuickSpecs for details. NOTE: Supports up to 4 hard drives.
	SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
	HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive	507774-B21
	HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive	507772-B21
	HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive	458941-B21
	SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
	HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive	571232-B21
	HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive	458947-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: https://h18004.www1.hp.com/products/quickspecs/13021_na/13021_na.html
	SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
	HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive	454234-B21
	HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive	417950-B21
	HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive	417855-B21

Step 3: Choose Additional Options for Factory Integration
HP Storage Controller	HP SC40Ge SAS HBA, FIO	449176-B21

Step 4: Choose Additional Options for Factory Integration
NOTE: For additional "Core Options" and "Additional Options", please refer to the "Options" sections below.

ML110 G5 Core Options

NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information.
HP Memory	HP 2GB (1x2GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit	450260-B21
	HP 1GB (1x1GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit	450259-B21

HP Optical Drives	HP Half-Height SATA DVD ROM Kit	447326-B21
	HP Half-Height SATA DVD-RW Optical Kit	447328-B21

ML110 G5 Hard Drives	NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; please refer to the specific hard drive QuickSpecs for details.
	SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
	HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive	507774-B21
	HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive	507772-B21
	HP 500GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive	458941-B21
	SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
	HP 250GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive	571232-B21
	HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive	458947-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: https://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html
	SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
	HP 450GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive	454234-B21
	HP 300GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive	417950-B21
	HP 146GB 3G SAS 15K rpm LFF (3.5-inch) Non-hot Plug Dual Port Enterprise 3yr Warranty Hard Drive	417855-B21
	NOTE: Please see the for Technical Specifications and additional information: https://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html

HP Networking	HP NC110T PCI Express Gigabit Server Adapter	434905-B21
	HP NC360T PCI Express Dual Port Gigabit Server Adapter	412648-B21
	HP NC373T PCI Express Multifunction Gigabit Server Adapter	394791-B21
	NOTE: Please see the QuickSpecs for Technical Specifications and additional information: www.hp.com/go/ProLiantNICs

Additional Options

HP Entry Level Server Management	HP ProLiant ML100 G5 Lights-Out 100c Remote Management Card	445513-B21
	NOTE: Supports HP ProLiant DL180 G5, ML110 G5, ML115 G5 and ML150 G5 servers. NOTE: For additional information on Lights-Out 100c Remote Management Card, please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12468_na/12468_na.html

HP Storage Controllers	SAS Controllers
	Smart Array E200 Controller
	HP Smart Array E200/128 BBWC Controller NOTE: Supports RAID 0,1,1+0, 5/BBWC.	411508-B21
	Optional Upgrades
	HP Non-Hot Plug SAS/SATA 4-Port Cable Kit NOTE: The purchase of a SAS Storage Controller requires the purchase of HP SAS/SATA 4-Port Cable (P/N 457692-B21).	457692-B21
	NOTE: SAS Storage Controllers supports both SATA and SAS drives. NOTE: On SATA models with embedded RAID, setup instructions are located in the User Guide. CTO RAID set-up is not available. HP ProLiant ML100 Series Server User Guide: https://h20000.www2.hp.com/bc/docs/support/SupportManual/c00260539/ c00260539.pdf
	SAS HBA
	HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5 Gb/s SATA, 3 Gb/s SAS. NOTE: Supports RAID 0,1.	416096-B21
	SCSI HBA
	HP SC11Xe U320 Host Bus Adapter NOTE: Supports Tape only, no RAID support. NOTE: Recommended HBA for SCSI tape drive connect.	412911-B21
	NOTE: Please see the following QuickSpecs for Technical Specifications and additional information: https://h18000.www1.hp.com/products/quickspecs/12460_na/12460_na.html (Smart Array E200 Controller) https://h18004.www1.hp.com/products/quickspecs/12617_na/12617_na.html (SC44Ge HBA) https://h18004.www1.hp.com/products/quickspecs/12566_na/12566_na.html (SC11Xe HBA)

Backup & Recovery Software	Data Protector Express
	HP Data Protector Express 4.0 SP1 Backup Server	BB117BA
	HP Data Protector Express 4.0 SP1 for Microsoft Small Business Server	BB118BA
	HP Data Protector Express Backup Server 4.0 SP1 Upgrade from Data Protector Express Single Server Edition	BB117BT
	NOTE: Only one of these Data Protector Express base products is required. To see available options: https://www.hp.com/go/dataprotectorexpress

Tape Backup	NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: https://www.hp.com/go/tape. For hardware and software compatibility of HP StorageWorks tape backup products see: https://www.hp.com/go/connect.
	HP StorageWorks DAT 320 USB Internal Tape Drive	AJ825A
	HP StorageWorks DAT 320 SAS Internal Tape Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter ( 416096-B21) recommended.	AJ830A
	HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter ( 416096-B21) recommended.	DW085A
	HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter ( 416096-B21) recommended.	EH847A
	HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 SAS Tape Autoloader NOTE: Requires HP 1U Tape Autoloader Rack-Mount Kit (AH166A) for rack installation. Connection using the HP SC44Ge SAS Host Bus Adapter ( 416096-B21) recommended.	AH558A
	HP StorageWorks MSL2024 Tape Library with one LTO-3 Ultrium 920 SAS Drive NOTE: Connection using the HP SC44Ge SAS Host Bus Adapter ( 416096-B21) recommended.	AH559A

Disk Backup	NOTE: For the complete range of StorageWorks D2D Backup Systems see: https://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: https://www.hp.com/go/rdx. For hardware and software compatibility of HP StorageWorks disk backup products see: https://www.hp.com/go/connect.
	USB Removable Media RDX Disk Backup Systems
	HP StorageWorks RDX320 Internal Removable Disk Backup System NOTE: 320GB of disk capacity per data cartridge.	AJ767A
	HP StorageWorks RDX500 Internal Removable Disk Backup System NOTE: 500GB of disk capacity per data cartridge.	AJ934A
	HP StorageWorks RDX750 Internal Removable Disk Backup System NOTE: 750GB of disk capacity per data cartridge.	AW577A

HP Uninterruptible Power Systems	HP Tower UPS
	HP T1000 G3 UPS Models
	HP T1000 G3 UPS	AF448A
	HP T1500 G3 UPS Models
	HP T1500 G3 UPS	AF450A
	HP T750 G2 UPS Models
	HP T750 G2 UPS	AF446A
	NOTE: Please see QuickSpecs for Technical Specifications and additional information: https://h18000.www1.hp.com/products/quickspecs/13160_na/13160_na.html
	HP T750 UPS
	HP T750J UPS	AF456A
	NOTE: Please see QuickSpecs for Technical Specifications and additional information: https://h18000.www1.hp.com/products/quickspecs/12192_na/12192_na.html NOTE: For additional information on sizing your server, please reference: https://www.upssizer.com

HP Rack Options	HP KVM Switch Options
	HP 1x4 Console Switch	AF611A
	HP PS2 Server Console Cable, 6 foot, 2-Pack	AF612A
	HP USB Server Console Cable, 6 foot, 2-Pack NOTE: required for supporting USB peripherals.	AF613A
	NOTE: For additional information regarding KVM Switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: https://www.hp.com/go/kvm
	Rack Kits
	Monitor/Utility Shelf	253449-B21
	ProLiant Rack Enabling Kit	417705-B21

HP USB and SD Options	HP USB 2-Button Optical Mouse ALL	DC172B
	HP USB 04 Standard Keyboard	DT528A#ABA

HP Care Pack Services	Hardware Services Next Business Day On-Site Service
	9-Hour x 5-Day Coverage, 3 Years, Electronic	U4433E
	Hardware Services - 4-Hour On-site Service
	13-Hour x 5-Day Coverage, 3 Years, Electronic	U4434E
	24-Hour x 7-Day Coverage, 3 Years, Electronic	U4435E
	Hardware Services 6-Hour Call to Repair On-Site Service
	6-Hour Call to Repair, On-Site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic	U4436E
	Hardware Installation
	Hardware Installation, Electronic	U4444E
	NOTE: For more information, customer/resellers can contact: https://www.hp.com/services/carepack

Memory

HP ProLiant ML110 G5 Models

NOTE: Memory configurations listed do not apply to "Factory Integrated Models".

Standard Memory

SATA Models:
1 GB of PC2-6400 DDR2 SDRAM running at 800MHz with ECC capabilities memory installed.

Standard Memory Plus Optional Memory

Up to 6 GB memory is available with the optional installation of 2 x 2 GB + 2 x 1 GB PC2-6400 un-buffered ECC DDR2 SDRAM DIMM Memory kits.

Standard Memory Replaced with Optional Memory

Up to 8GB of memory is available with the removal of the standard 1 GB of memory and the optional installation of 4x 2 GB PC2-6400 un-buffered ECC DDR2 SDRAM DIMM Memory kits.

NOTE: The below chart does not represent all possible memory configurations.
NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1 and 3 are interleaving pair. Slots 2 and 4 are interleaving pair).

ML110 G5 Memory		Slot
		1	2	3	4
Standard	1 GB	1 GB	Empty	Empty	Empty
Optional	6 GB	1 GB	2 GB	1 GB	2 GB
Maximum	8 GB	2 GB	2 GB	2 GB	2 GB

Following are memory options available from HP:
HP Memory	HP 2GB (1x2GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit	450260-B21
HP Memory	HP 1GB (1x1GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit	450259-B21

Storage

	1	16x SATA DVD-ROM
	2	Removable Media Bays (5.25" each)
	3, 4, 5, 6	Four Non-Hot Plug Drive Bays


Drive Support

	Quantity Supported	Position Supported	Controller
Removable Media
DVD Drive	2	1 or 2	Integrated SATA
DVD-RW Drive	2	1 or 2	Integrated SATA

ML110 G5 Hard Drives (SATA Models only) NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and firmware) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SATA Non-Hot Plug LFF (3.5-inch) Midline (MDL) Drives
	Quantity Supported	Position Supported	Controller
2TB 3G 7.2K 1TB 3G 7.2K 500GB 3G 7.2K	Up to 4	3,4,5,6	6 Port SATA controller with Embedded RAID on Motherboard NOTE: Transfer rate: 3 Gb/s SATA
SATA Non-Hot Plug LFF (3.5-inch) Entry (ETY) Drives
	Quantity Supported	Position Supported	Controller
250GB 3G 7.2K 160GB 3G 7.2K	Up to 4	3,4,5,6	6 Port SATA controller with Embedded RAID on Motherboard NOTE: Transfer rate: 3 Gb/s SATA

ML110 G5 Hard Drives (SAS Models only)
SAS Non-Hot Plug LFF (3.5-inch) Enterprise (ENT) Drives
	Quantity Supported	Position Supported	Controller
450GB 3G 15K DP 300GB 3G 15K DP 146GB 3G 15K DP	Up to 4	3,4,5,6	HP 4 Internal Port SAS HBA SC40Ge with RAID (0,1) NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.

Maximum Storage Capacity – SATA/SAS Models
Internal	SATA	8.0TB (4 x 2TB)
	SAS	1.8TB (4 x 450GB)

Tape and Disk Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media, including the internal fitting models, see: https://www.hp.com/go/tape. For the complete range of StorageWorks D2D Backup Systems see: https://www.hp.com/go/d2d. For the complete range of StorageWorks RDX drives and media see: https://www.hp.com/go/rdx. For hardware and software compatibility of HP StorageWorks disk and tape backup products see: https://www.hp.com/go/connect.

	Position	Recommended Controller	Part Number
HP StorageWorks SCSI Tape Drives LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-3 Ultrium 960 LTO4 Ultrium 1760 LTO-4 Ultrium 1840 DAT 40 DAT 72 DAT 160	Internal or External	HP SC11Xe Host Bus Adapter Please check the full compatibility information at: https://www.hp.com/go/connect	412911-B21

HP StorageWorks SCSI Rack Mount Kits 1U Rack-Mount Kit 3U Rack-Mount Kit	External	HP SC11Xe Host Bus Adapter Please check the full compatibility information at: https://www.hp.com/go/connect	412911-B21

HP StorageWorks USB Tape Drives DAT 40 DAT 72 DAT 160 DAT 320	Internal or External	USB 2.0 Port	N/A

HP StorageWorks USB Rack Mount Kits 1U USB Rack-Mount Kit	External	USB 2.0 Port	N/A

HP StorageWorks SAS Tape Drives DAT 160 DAT 320 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-4 Ultrium 1760 LTO-4 Ultrium 1840 LTO-5 Ultrium 3000 LTO-5 Ultrium 3280	Internal or External	HP SC44Ge SAS Host Bus Adapter Please check the full compatibility information at: https://www.hp.com/go/connect	416096-B21

HP StorageWorks SAS Rack Mount Kits 1U Rack-Mount Kit 3U Rack-Mount Kit	External	HP SC44Ge SAS Host Bus Adapter Please check the full compatibility information at: https://www.hp.com/go/connect	416096-B21

HP StorageWorks SCSI Tape Autoloaders DAT 72x10 Autoloader 1/8 G2 Autoloader	External	HP SC11Xe Host Bus Adapter Please check the full compatibility information at: https://www.hp.com/go/connect	412911-B21

HP StorageWorks SCSI Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000	External	HP U320e SCSI Dual Channel Controller Please check the full compatibility information at: https://www.hp.com/go/connect	AH627A

HP StorageWorks SAS Tape Autoloaders and Libraries 1/8 G2 Autoloader MSL2024 MSL4048 MSL8096	External	HP SC44Ge SAS Host Bus Adapter Please check the full compatibility information at: https://www.hp.com/go/connect	416096-B21

HP StorageWorks Fibre Channel Tape Libraries MSL2024 MSL4048 MSL8096 MSL6000	External	Please consult the EBS connectivity matrix at: https://www.hp.com/go/ebs for connectivity information and the supported Fibre Channel HBAs shown in this QuickSpecs.

HP StorageWorks USB RDX Removable Disk Backup System RDX160 RDX320 RDX500 RDX750	External	USB 2.0 port	N/A

Power Specifications

Part Number	445067-001
Operational Input Voltage Range (Vrms)	100 to 127 and 200 to 240 V auto ranging
Frequency Range (Nominal) (Hz)	50 to 60 Hz

Nominal Input Voltage (Vrms)	100	120	200	230	240
Max Rated Output Wattage Rating	365	365	365	365	365
Nominal Input Current (A rms)	6	N/A	3	N/A	N/A
Max Rated Input Wattage Rating (Watts)	N/A	N/A	N/A	N/A	N/A
Max. Rated VA (Volt-Amp)	600	N/A	N/A	N/A	N/A
Efficiency (%)	>65%	>65%	>65%	>65%	>65%
Power Factor	N/A	N/A	N/A	N/A	N/A
Leakage Current (mA)	N/A	<0.45mA	N/A	N/A	N/A
Maximum Inrush Current (A peak)	N/A	No component was damaged and input fuse shall not blow	N/A	No component was damaged and input fuse shall not blow	N/A
Maximum Inrush Current duration (mS)	N/A	N/A	N/A	N/A	N/A

System Specifications

	Power **
HP ProLiant ML110 G5 Fully Configured	(see **)
Fully Loaded System output Wattage (W)	365W
Fully Loaded System Input Current (A rms)	6A @ 100V, 3A @ 200V
Fully Loaded System Thermal (BTU- Hr)	1915BTU
Fully Loaded System VA (Volt-Amp)	600 VA
System Leakage with all power supplies loaded (mA)	0.45mA@120V
System Inrush Current with all power supplies loaded (A)	<150A@ 240Vac
Power cord requirements	Nema 5-15P to IEC320-C13
	IEC320-C13 to IEC320-C14
	**Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided DIMMs, (4) HDDs, (1) DVD-ROM, (4) PCI cards, and (1) power supply.

Power Cords (13 Cord Sets)	Power Cord Part Number
	121565-001

Quickspecs

System Unit	Dimensions (HxWxD) (with feet)	14.5 x 6.9 x 16.8 in (36.7 x 17.5 x 42.6 cm)
	Weight (approximate)	Maximum (all hard drives, power supplies, and processors installed)	39 lb (17.5 kg)
	Weight (approximate)	Minimum (one hard drive, power supply, and processor installed)	23.81 lb (10.8 kg)
	Input Requirements (per power supply)	Rated Line Voltage	90 to 132 VAC, 180 to 264 VAC
		Rated Input Current	6 A (at 100 VAC), 3 A (at 200 VAC)
		Rated Input Frequency	47 to 63 Hz
		Rated Input Power	600 W (at 100 VAC), 600 W (at 200 VAC)
	Power Supply Output (per power supply)	Rated Steady-State Power	365 W (at 100 VAC), 365 W (at 200 VAC)
	Power Supply Output (per power supply)	Maximum Peak Power	385 W (at 100 VAC), 385 W (at 200 VAC)
	System Inlet Temperature	Operating	10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).
	System Inlet Temperature	Non-operating	-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
	Relative Humidity (non-condensing)	Operating	10% to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature, non-condensing.
	Relative Humidity (non-condensing)	Non-operating	5% to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
	Altitude	Operating	3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
	Altitude	Non-operating	9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
	Acoustic Noise	Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
		SATA Model
		Idle
		_{L WAd}	4.2 Bels
		_{L pAm}	26 dBA
		Operating
		_{L WAd}	5.1 Bels
		_{L pAm}	34 dBA
		SAS Model
		Idle
		_{L WAd}	5.2 Bels
		_{L pAm}	34 dBA
		Operating
		_{L WAd}	5.7 Bels
		_{L pAm}	40 dBA
	Emissions Classification (EMC)	FCC Rating	Class B
		Normative Standards	CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1
		NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

HP 160GB 3G SATA 7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive	458947-B21	Capacity	160,041 MB
		Height Maximum drive dimension	1.0 in. (26.1 mm)
		Width	4.0 in (101.6 mm)
		Depth Maximum drive dimension	5.787 in (147.0 mm)
		Interface	Serial ATA
		Transfer Rate (Maximum)	3Gb/s
		Native Command Queuing	N/A
		Seek Time (typical reads, including settling)	Single Track	2.0 ms
			Average	<11 ms
			Full-Stroke	23.0 ms
			Rotational Speed	7,200 rpm
		Physical Configuration	Bytes/Sector	512
			Logical Blocks	312,581,808
		Operating Temperature	41° to 131° F (5° to 55° C)

16X Max SATA DVD-ROM Drive	Disk	Applicable Disk	CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2, Form 1 and 2)
			Photo CD (Single and Multi-session)
			CD-R, CD-RW
			Mixed Mode (Audio and Data combined)
			DVD-ROM
			DVD-R/RW, DVD+R/RW
			CD-R, CD-RW, DVD-ROM, DVD+R, DVD+RW
		Capacity	4.7 GB (DVD-5)
		Capacity	8.54 GB (DVD-9)
	Block Size	DVD Media	2,048 bytes
	Interface	SATA
	Access Times (typical)	Random	<140 ms
	Access Times (typical)	Full-Stroke	<250 ms
	Data Transfer Rate	Sustained	8100 to 21600 KB/s (6X to 16X)
	Data Transfer Rate	Bus Rate	1.5 Gbps
	Cache Buffer	128 KB
	Start-up Time (typical)	< 7 seconds
	Stop Time	< 4 seconds
	Laser Parameters	Type	Semiconductor Laser GaA1As
	Laser Parameters	Wave Length	780 ± 25 nm
	Operating Conditions	Temperature	41° to 122° F (5° to 50° C)
	Operating Conditions	Humidity	10% to 90%
	Dimensions	(HxWxD, maximum)	1.7 x 5.85 x 8.11 in (42.9 x 150 x 195 mm)
	Dimensions	Weight	2.64 lb (1.2 kg)

HP 4 Internal Port SAS Host Bus Adapter (SAS/SATA HP Model)	SATA Protocol	SATA 1.5Gb/s
	SATA Ports	4 internal
	Port transfer rate	1.5 Gb/s total
	Maximum Capacity	up to 4.0TB (4 x 1TB Non-Hot Plug SATA HDD)
	RAID Levels Supported	RAID 1 (Mirroring) RAID 0 (Striping)
	Logical RAID Volumes Supported	2
	Dimensions (excluding bracket)	6.6 x 2.5 x 0.6 in (16.8 x 6.4 x 1.6 cm)
	Disk Drive and Enclosure Protocol Support	3 Gbps SAS (Serial Attached SCSI) 1.5 Gbps SATA (Serial Advanced Technology Attachment)
	Architecture	64-bit
	SAS Connectors	1 internal SFF8484 x4 Wide SAS Connectors 12 Gbps per x4 Wide SAS Port (4 x 3 Gbps)
	Data Transfer Method	PCI-Express x8 - 2 GB/s maximum bandwidth
	PCI Bus Speed	PCI-Express x8
	Simultaneous Drive Transfer Ports	1 x4 Wide SAS Connectors
	Port Transfer Rate	12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
	Software upgradeable Firmware	Yes
	Maximum Capacity	1.2TB (4 x 300GB)
	Memory Addressing	64-bit, supporting servers memory greater than 4 GB
	Logical Drives Supported	Up to 2 Logical Volumes Up to 10 drives total in all RAID volumes Up to 2 Drives per RAID 1 Up to 4 Drives per RAID 0
	RAID Support	RAID 1 (Mirroring) RAID 0 (Striping)
	Upgradeable Firmware	4-MB flashable ROM
	Disk Drive and Enclosure Protocol Support	3 Gbps SAS and 1.5 Gbps SATA

HP SC40Ge SAS Host Bus Adapter with RAID	RAID Support	RAID 1 (Mirroring)
	RAID Support	RAID 0 (Striping)
	Logical Drives Supported	Up to 2 Logical Volumes
		Up to 10 drives total in all RAID volumes
		Up to 2 Drives per RAID 1
		Up to 8 Drives per RAID 0
	Maximum Capacity	3.6TB (8 x 450GB)
	Data Transfer Method	PCI-Express x8 - 2 GB/s maximum bandwidth
	Port Transfer Rate	12 Gb/s per x4 Wide SAS Port (4 x 3 Gb/s)
	Simultaneous Drive Transfer Ports	2 x4 Wide SAS Connectors
	Protocols	3 Gbps SAS and 1.5 Gbps SATA
	Protocols	1.5 Gbps SATA (Serial Advanced Technology Attachment)
	External SAS Connectors	None
	Internal SAS Connectors	2 internal SFF8484 x4 SAS Connectors
	Upgradeable Firmware	4MB flashable ROM

Embedded NC105i PCIe Gigabit Server Adapter	Network Interface	Integrated 10/100/1000BASE-T Transceiver
		Combines a triple-speed IEEE 802.3TM – Compliant Media Access Controller (MAC) with a triple-speed Ethernet transceiver.
	Data Transfer Method	Compliant to x1 PCIe Specification
	Controller	BCM5722
	Network Transfer Rate	10Base-T (Half-Duplex)	10 Mb/s
		10Base-T (Full-Duplex)	20 Mb/s
		100Base-TX (Half-Duplex)	100 Mb/s
		100Base-TX (Full-Duplex)	200 Mb/s
		1000Base-TX (Half and Full-Duplex)	2000Mb/s
	Connector	RJ-45 connector
	Cable Support	Performs all the physical layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethemet on standard Category 5 UTP

Environment-friendly Products and Approach

End-of-life Management and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.