|
 DL QuickSpecs
|
DL20
|
|
|
DL60
|
|
|
DL80
|
|
|
DL120
|
|
|
DL140
|
|
|
DL145
|
|
|
DL160
|
|
|
DL160se
|
|
|
DL165
|
|
|
DL180
|
|
|
DL185
|
|
|
DL320
|
|
|
DL325
|
|
|
DL345
|
|
|
DL360
|
|
|
DL365
|
|
|
DL380
|
|
|
DL385
|
|
|
DL388
|
|
|
DL560
|
|
|
DL580
|
|
|
DL585
|
|
|
DL740
|
|
|
DL760
|
|
|
DL785
|
|
|
DL1000
|
|
|
|
ML QuickSpecs
|
ML30
|
|
|
ML110
|
|
|
ML115
|
|
|
ML150
|
|
|
ML310
|
|
|
ML330
|
|
|
ML350
|
|
|
ML370
|
|
|
ML530
|
|
|
ML570
|
|
|
ML750
|
|
|
|
BL QuickSpecs
|
BL10e
|
|
|
BL20p
|
|
|
BL25p
|
|
|
BL260c
|
|
|
BL280c
|
|
|
BL2x220c
|
|
|
BL30p
|
|
|
BL35p
|
|
|
BL40p
|
|
|
BL420c
|
|
|
BL45p
|
|
|
BL460c
|
|
|
BL465c
|
|
|
BL480c
|
|
|
BL495c
|
|
|
BL60p
|
|
|
BL620c
|
|
|
BL660c
|
|
|
BL680c
|
|
|
BL685c
|
|
|
BL860c
|
|
|
|
SL QuickSpecs
|
SL160z
|
|
|
SL165z
|
|
|
SL170s
|
|
|
SL170z
|
|
|
SL230s
|
|
|
SL250s
|
|
|
SL270s
|
|
|
SL2x170z
|
|
|
SL335s
|
|
|
SL390s
|
|
|
SL4540
|
|
|
SL4545
|
|
|
|
XL QuickSpecs
|
XL170r
|
|
|
XL190r
|
|
|
XL220a
|
|
|
XL230a
|
|
|
XL730f
|
|
|
XL740f
|
|
|
XL750f
|
|
|
|
CL QuickSpecs
|
CL1850
|
|
CL1850 G1
| |
CL380
|
|
CL380 G1
| |
|
|
|
|
|
|
 |
Proliant DL580 G2 QuickSpecs |
 US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant DL580 G2 Overview
|
HP ProLiant DL580 Generation 2 (G2)
|
|
| |
|
| 1. Six 64-bit/100-MHz PCI-X I/O Slots (Four Hot
Plug, two Non-Hot Plug) |
| 2. Dual Memory Expansion Boards (8 DIMM slots
each - one board standard on all models, 2nd board is optional) |
| 3. Hot Plug Redundant Fans |
| 4. Processor Air Baffle |
| 5. 4U (7" Height) Rack Form Factor |
| 6. Up to 4 Intel Processors MP |
|
7. Integrated Smart Array 5i Plus Controller (Battery Backed
Write Cache standard on all 2P models, optional on 1P model)
|
| 8. Tool-less "Snap In" rail solution |
| 9. Additional Hot Plug Redundant Fans |
| 10. Server Lifting Handle |
|
| 11. Front Panel LED Display (internal
and external health, Unit ID light) and Power Button |
| 12. Wide Ultra3/U320 Duplex Drive
Cage (can be Simplex configured) |
| 13. Dual 800-Watt Hot Plug Redundant
Power Supplies (low line or high line), standard on all 2P models
(one ships standard on 1P model, requires optional RPS for redundancy) |
| 14. Slimline Drives: 24X
(slimline) CD-ROM IDE Drive |
| 15. Slimline Drives: Ejectable
1.44 MB (slimline) Diskette Drive |
| 16. QuickFind Diagnostic Display
(viewable through Front Access Panel) |
|
17. Removable Front Access Panel
|
| 18. Removable Rear Access Panel |
|
|
|
| What's New |
- Intel® Xeon Processors
MP at 2.2 GHz/2MB, 2.7 GHz/2MB or 3.0 GHz/4MB
- Integrated Dual Port NC7170 PCI-X Gigabit Server
Adapter in a slot
|
|
|
At A Glance
- Delivering maximum performance
and unprecedented availability in a flexible, rack optimized form factor
- Intel Xeon Processors MP
- ServerWorks Grand Champion-HE chipset
- 4x1 interleaved memory, 200MHz DDR SDRAM Memory (PC1600
Registered SDRAM with Advanced ECC functionality)
- 2048 MB (2P Models) or 1024 MB (1P Model) standard
memory, expandable to 32 GB
- HP Advanced Memory Protection (Online Spare, Single
Board Mirrored Memory, Hot Plug Mirrored Memory, Hot Add Memory)
- Six, full length 64-bit/100 MHz PCI-X slots, 4 Hot
Pluggable
- Integrated Lights-Out Standard Management (iLO) on
system board
- Integrated NC7770 PCI-X Gigabit Server Adapter or
Integrated HP NC7170 Dual-Port PCI-X 1000T Gigabit Server Adapter in
a slot Depending on model)
- Integrated Smart Array 5i Plus Controller (Dual Channel,
Ultra3) with 64-MB total memory on 5i Plus Memory Module
- Battery-Backed Write Cache Enabler module on all
2P models (optional on 1P model)
- Internal Hot Plug Drive Storage of up to 1.20 TB
(4 x 300 GB 1" Ultra320 hard drives) or one DAT hot plug tape drive
and two hot plug hard drives
- Redundant Cooling Zones for major subsystems (Memory,
I/O, CPUs) assure 7x24 cooling
- Toolless and virtually cable-less internal design
- Innovative diagnostic lighting (QuickFind Diagnostic
Display) for rapid response to service events
- Rapid Deployment racking solution (rack rails and
cable management)
- Protected by HP Services and a worldwide network
of resellers and service providers. Three-year Next Business Day, on-site
limited global warranty. Certain restrictions and exclusions apply.
Pre-Failure Notification on processors, memory, and SCSI hard drives.
|
Standard Features
Processor
One or more of the following depending
on Model |
Intel Xeon Processor MP at 3.0
GHz\4MB |
| Intel Xeon Processor MP at 2.7
GHz\2MB |
| Intel Xeon Processor MP at 2.2
GHz\2MB |
| Intel Xeon Processor MP at 2.8
GHz\2MB |
| Intel Xeon Processor MP at 2.5
GHz\1MB |
| Intel Xeon Processor MP at 2.0
GHz\1MB |
|
Cache
Memory
One of the following depending
on Model
|
4MB Integrated Level 3 Cache
NOTE: 3.0 GHz Models only. |
2MB Integrated Level 3 Cache
NOTE: 2.8 GHz, 2.2 GHz, 2.7 GHz Models
only. |
1MB Integrated Level 3 Cache
NOTE: 2.5 GHz, 2.0 GHz Models only. |
|
| Upgradability |
Upgradable to quad
processing |
|
Memory
One of the following depending
on Model |
Type |
200-MHz Double Data Rate (DDR)
SDRAM (PC1600 Registered SDRAM Memory with Advanced ECC functionality) |
| Standard (2P Models) |
2048 MB |
| Standard (1P Models) |
1024 MB |
| Maximum |
32 GB |
NOTE:
Advanced ECC Memory Technology protects the data even in the event of
an entire SDRAM component failure. Embedded in the chipset design, this
feature allows the use of Industry-Standard Registered DIMMs.
NOTE: 32 GB achieved with use of 2nd, optional memory board and 2GB
Registered DIMM sticks. |
|
Network Controller
One of the following depending
on Model
|
Integrated NC7170
dual port PCI-X Gigabit Server Adapter in a slot (3.0 GHz, 2.7 GHz, 2.2
GHz models only) |
| Integrated NC7770
PCI-X Gigabit Server Adapter in a slot |
|
| Expansion Slots |
Bus speed
|
Bus number
|
Hot Plug
|
PCI Voltage
|
Notes
|
|
1
|
64-bit / 100 MHz PCI-X |
10
|
No
|
3.3 Volt
|
Support RILOE slot |
|
2
|
64-bit / 100 MHz PCI-X |
10
|
No
|
3.3 Volt
|
NC7770/ NC7170 (3.0 GHz, 2.7
GHz, 2.2 GHz models) installed standard |
|
3
|
64-bit / 100 MHz PCI-X |
6
|
Yes
|
3.3 Volt
|
None |
|
4
|
64-bit / 100 MHz PCI-X |
6
|
Yes
|
3.3 Volt
|
None |
|
5
|
64-bit / 100 MHz PCI-X |
2
|
Yes
|
3.3 Volt
|
None |
|
6
|
64-bit / 100 MHz PCI-X |
2
|
Yes
|
3.3 Volt
|
None |
| |
| Manageability |
Integrated Lights-Out
(iLO) Standard Management (ASIC on the System Board) |
|
| Storage Controllers |
Smart Array 5i Plus
Controller (integrated on system board), Dual Channel, Ultra3 (supports
RAID 0, 1, 1+0, and 5 across internal hard disk drives) with 64 MB of memory. |
- 64-MB total memory for code, transfer buffers, and read/write cache
on the 5i Plus Memory Module
- Connector for Battery Backed Write Cache (BBWC) Enabler
|
| NOTE:
The Smart Array 5i Plus Controller is integrated on the system board and
is designed to support the duplex/simplex drive cage. An external SCSI port
is not available on the HP ProLiant DL580 G2. External SCSI solutions require
the addition of a PCI or PCI-X option card. Slot based Smart Array controllers
can support both internal hard drives as well as external SCSI solutions. |
|
| Storage Data Protection |
The Battery-Backed
Write Cache (BBWC) Enabler protects up to 64-MB write cache memory from
hard boot, power, controller, or system board failures. |
- Standard on 2P Models, optional on 1P Models
- Battery charge/life: Up to 72 hours/3 years
- Transportable data protection
- Increases overall controller performance
|
| NOTE:
Safely transport your write cache data to another HP ProLiant DL580
G2 in the data center by removing the BBWC Enabler and 5i Plus Memory Module
simultaneously (connected by short cable). |
|
| Storage |
Diskette Drive |
1.44 MB (slimline) – ejectable
for security and serviceability |
| Optical Drive |
24x IDE CD-ROM Drive (slimline)
– ejectable for security and serviceability |
| Hard Drives |
None |
| Maximum Internal Storage |
1.20 TB (4 x 300 GB Ultra320
1" SCSI drives) (internal hot plug Ultra3 drive cage) |
| Hard Disk Drive Backplane |
Internal Wide Ultra3/U320 backplane
supports up to four 1" hard disk drives and is easily configurable
to support simplex (4x1) or duplex mode (2x2) Standard shipping configuration
is the duplex mode.
NOTE: U320 speeds achieved by installing
a slot based U320 Smart Array controller and can control both the internal
hard drives as well as external storage solutions.
NOTE: Optional SCSI cable assembly 288874-B21 is required for connecting
Smart Array Controller in a PCI slot to internal hard drive backplane. Duplex
configuration requires two such kits. |
|
| Interfaces |
Serial |
1 |
|
Pointing Device (Mouse) |
1 |
|
Graphics |
1 |
|
Keyboard |
1 |
|
Rear USB Ports |
2 |
|
iLO Remote Management |
1 |
|
Network RJ-45 |
1 / 2 |
|
| Graphics |
Integrated 1280 x 1024, 16M
color on PCI local bus, 8-MB of SDRAM video memory |
|
| Form Factor |
Rack (4U = 7 inches), ships
with sliding rails and cable management system
Space saving form factor (4U) provides space efficiencies while providing
maximum deployment flexibility |
|
|
ProLiant
Essentials Foundation Pack Software
|
| HP Systems Insight Manager |
HP's new HP Systems Insight
Manager (HP SIM) helps maximize system uptime and performance and
reduce system maintenance costs by providing proactive notification
of problems before those problems result in unplanned downtime or
reduced productivity. HP SIM are both easy to set up work with the
Insight Management Agents, integrated Lights-Out and Remote Insight
Lights-Out Edition, and Version Control Agents to deliver robust fault,
configuration, and asset management as well as remote administration.
With HP SIM customers will also be able to take advantage of role-based
security; the ability to manage ProLiant, Integrity, and HP 9000 systems;
and plug-ins for storage, client, printer, and power management as
well as server rapid deployment, performance management, and workload
management. For more details on HP SIM visit https://www.hp.com/go/hpsim. |
|
| SmartStart |
SmartStart is a tool that
simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please
visit the SmartStart Web site at https://www.hp.com/servers/smartstart.
SmartStart version supported (minimum):
SmartStart 6.40. |
|
| Management Agents |
The Management Agents
form the foundation for HP's Intelligent Manageability strategy. They
provide direct, browser-based access to in-depth instrumentation built
into HP servers, workstations, desktops, and portables, and send alerts
to Systems Insight Manager and other enterprise management applications
in case of subsystem or environmental failures. For additional information
about the Management Agents and other management products from HP,
please visit the management Web site at https://www.hp.com/servers/manage. |
| Subscriber's Choice |
Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription
service that provides automatic delivery of software and driver change
notifications for ProLiant products. Sign up at https://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become
available, on a weekly or monthly basis. |
|
ROMPaq,
support software, and
configuration utilities |
The latest software, drivers,
and firmware fully optimized and tested for your ProLiant server and
options available in SmartStart or downloadable from Software and
Drivers download pages, linked from the SmartStart website at https://www.hp.com/servers/smartstart. |
|
| Survey Utility and diagnostics
utilities |
The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP and at
your fingertips, available in SmartStart. |
|
| Optional
ProLiant Essentials Value Packs |
Optional software offerings
that selectively extend the functionality of an Adaptive Infrastructure
to address specific business problems and needs:
- Rapid Deployment Pack - an automated solution for multi-server
deployment and provisioning, enabling companies to quickly and
easily adapt to changing business demands.
- Workload Management Pack - provides easier management of complex
environments, improving overall server utilization and enabling
Windows® 2000 customers for the first time to confidently deploy
multiple applications on a single multiprocessor ProLiant Server.
- Integrated Lights-Out Advanced Pack - upgrades the Integrated
Lights-Out processor to full virtual presence and control with
graphical console and virtual media.
- Performance Management Pack - a performance management solution
that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better
utilize their valuable resources.
- Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route
based on network conditions, plus it provides an extra layer of
protection. The virus throttle feature of the solution slows the
propagation of fast spreading virus.
- Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well
operating system configurations that can be exploited by viruses,
worms, and other blended threats
- Virtual Machine Management Pack - provides central management
and control of virtual machines from Microsoft and VMware. Integrated
approach provides the ability to manage both physical and virtual
resources from a single management console.
|
|
NOTE:
Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials. |
|
| Industry Standard Compliance |
ACPI 1.0a. Compliant |
| PCI 2.2 Compliant |
| PXE Support |
| WOL Support |
| Physical Address Extension (PAE)
Support |
| Microsoft® Logo certifications |
|
| Intelligent
Manageability |
Integrated Lights-Out (iLO)
Standard Management |
- Virtual Text Remote Console
- Virtual Power Button Control
- Dedicated LAN Connectivity
- Automatic IP Configuration via DHCP/DNS/WINS
- Industry Standard 128-bit Secure Sockets Layer (SSL) Security
- IML and iLO Event Logging
- Support for 12 user accounts with customizable access privileges
|
Integrated Lights-Out (iLO)
Advanced Pack (supports Advanced features such as Graphical Remote Console
and Virtual Floppy - available as a separate option)
Automatic Server Recovery-2 (ASR-2)
HP Systems Insight Manager
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log (IML)
Hot Spare Boot
(NOTE: Upon the event of a failed processor or VRM in a multi-processing
environment, the system will automatically reboot and use the remaining
good processor(s).)
Dynamic sector repairing and drive parameter tracking (with Smart Array
controllers)
Redundant/adaptive load balancing NIC Support |
|
| Availability |
- Standard Advanced ECC functionality detects and corrects single bit
and specific multi-bit memory errors (4bit and 8bit) while using industry
standard registered DIMMS. Functionality is embedded in the chipset
design.
- HP Advanced Memory Protection Technology – delivers unsurpassed
memory protection and server availability:
- Online Spare Memory
Offers a higher level of memory protection than Advanced ECC alone.
If the number of single-bit correctable errors on a bank exceeds
the pre-defined error threshold, that bank will fail over to the
online spare bank without intervention or server interruption. The
failed memory can then be replaced at the user's convenience during
a scheduled maintenance window.
|
- Single-Board Mirrored Memory
Single-board mirrored memory provides a higher level of availability
than Advanced ECC and Online Spare Memory because it protects against
multi-bit errors. Single-board Mirrored Memory uses mirrored banks
on a single memory board that is configured with one redundant bank
of memory. The system writes to both banks, but reads from one. If
a DIMM(s) has a multi-bit error, the system simply reads from the
mirrored bank instead. This process occurs without intervention or
server interruption, and the failed DIMM can be replaced during a
regularly scheduled shutdown.
|
- Hot Plug Mirrored Memory
Hot Plug Mirrored Memory is a fault-tolerant memory feature that provides
a higher level of availability than Advanced ECC, Online Spare Memory,
or Single-Board Mirrored Memory because it protects against multi-bit
errors and does not require any server downtime to replace failed
DIMMs. Hot Plug Mirrored Memory requires that two memory boards be
installed, one an exact mirror of the other, which run in parallel
and provide protection against multi-bit memory errors. When configured
for Hot Plug Mirrored Memory, the system writes to both memory boards,
but reads from one. If a read error occurs, the system fails over
to the redundant memory board. At that point the memory board containing
the failed DIMMs can be hot replaced. Once the failed DIMMs are replaced
and the memory board re-installed into the server, the system goes
back to full mirrored status. All this occurs without bringing the
server down.
|
NOTE: Hot Plug Mirrored Memory and Dual-Board Online Spare
Memory require the use of two memory cards. All HP ProLiant DL580
G2 servers ship standard with a single memory board. The second memory
board is optional (P/N  203320-B21).
NOTE: All HP Advanced Memory Protection modes are user configurable
through the ROM-Based Setup Utility (RBSU) and viewable through HP
Systems Insight Manager and the Integrated Management Log (IML.).
|
- PCI-X Hot Plug Technology (Four 64bit/100-MHz PCI-X hot plug slots
available)
- Smart Array 5i Plus Controller with standard Battery Backed Write
Cache (BBWC) Enabler provides transportable data protection and increases
overall controller performance. Up to 64MB Battery Backed Write Cache
protection available on 2P models (BBWC Enabler is optional on 1P model.)
- Redundant Cooling Zones across major server subsystems (Memory, I/O,
CPU) provide 7x24 cooling. Each zone is independent of each other and
is able to support n+ 1 redundancy, as indicated below:
- PCI-X expansion zone is 1 + 1 redundant (fans 1 and 2)
- Memory zone is 1 + 1 redundant (fans 3 and 4)
- CPU zone is 2 + 1 redundant (fans 5, 6, and 7)
|
| This zone configuration enables
the server to withstand up to three fan failures, provided that they are
not within the same zone. Each fan is hot plug redundant and individually
removable. |
- Up to four Hot Plug Ultra3 Drive Bays
- Duplex or Simplex SCSI Backplane (Duplex configuration is standard)
- Dual Hot Plug Redundant Power Supplies (standard on 2P Models, one
ships standard on 1P Models)
|
|
| Serviceability |
- Innovative Diagnostic Lighting
- QuickFind Diagnostic Display – precisely depicts all major subsystems
of the server (PCI-X I/O, Memory, CPU, Redundant Cooling, Interlock,
Thermtrip) and gives instant visual indication of fault status. Located
on top front of server.
- LED display on front panel indicates power, internal health, external
health, Unit ID light.
- LED display on Memory board indicates Memory status, health, and protection
mode.
- Tool-less, virtually cable-less interior design
- Tool-less access to interior of server
- Two ejectable, slimline media drives (diskette and CD-ROM standard
with support for optional DVD-ROM drives) are removable without
the use of tools
- Front access power supplies
- Spring-loaded memory board release latches prevent unseating incidents
- PCI Card Guides locks full length PCI cards in place during transit
- SCSI Duplex/Simplex Drive Cage connects directly to system board
– no cables.
NOTE: Configure your SCSI
Duplex/Simplex Drive Cage by means of simple switch (duplex to simplex)
located on the cage itself. System ships standard in Duplex mode.
- Seven individually removable fans connect without cables to the
system board
- Processor/VRM Retention Cage securely locks both processor and
VRM into their respective sockets
- Tool-less removal of system board
- Quick Deploy Rails
- Tool-less design "snap in" rail
|
|
| Security |
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
Network Server Mode
Serial interface control
Administrator's password
Disk configuration lock
Removable Diskette drive
Removable CD-ROM drive |
|
| Power Supply |
800-Watt (low line or high line)
Hot Plug Power Supply
NOTE: One 800-Watt Hot Plug Power
Supply ships standard with 1P Models (optional Redundant Hot Plug Power
Supply Option Kit).
NOTE: Two 800-Watt Hot Plug Power Supplies ship standard with 2P
Models. |
|
| System Fans |
Standard |
7 Hot plug, redundant fans (individually
removable) |
| Maximum |
7 Hot plug, redundant fans (individually
removable) |
- Redundant Cooling Zones across major server subsystems (Memory, I/O,
CPU) provide 7x24 cooling. Each zone is independent of each other and
is able to support n+ 1 redundancy, as indicated below:
- PCI-X expansion zone is 1 + 1 redundant (fans 1 and 2)
- Memory zone is 1 + 1 redundant (fans 3 and 4)
- CPU zone is 2 + 1 redundant (fans 5, 6, and 7)
- This zone configuration enables the server to withstand up to three
fan failures, provided that they are not within the same zone. Each
fan is hot plug redundant and individually removable.
|
|
| Rack Airflow Requirements |
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
|
| CAUTION: If
a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment: |
- Front and rear doors: If your 42U server rack includes closing
front and rear doors, you must allow 5,350 sq cm (830 square inches)
of hole evenly distributed from top to bottom to permit adequate airflow
(equivalent to the required 64 percent open area for ventilation).
- Side: The clearance between the installed rack component
and the side panels of the rack must be a minimum of 7 cm (2.75 inches).
|
| CAUTION: Always
use blanking panels to fill all remaining empty front panel U-spaces in
the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation
Guide or the Documentation CD provided with the server, or to the server
documentation located in the Support section at the following URL: https://www5.HP.com/products/servers/proliantdl580/index.html.
|
|
| Rack Mounting Requirements |
HP ProLiant DL580 G2 rack models
provide tool-free support for square hole racks (including Compaq/HP 7000,
9000, 10000 and H9 series) with an adjustment range from 28" –
29" in depth. |
|
| Factory Express Portfolio for
Servers and Storage |
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and storage
products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of servers
and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem,
HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to https://www.hp.com/go/factory-express. |
|
| Service and Support |
This product is covered by a
global limited warranty and supported by HP Services and a worldwide network
of resellers and service providers. Hardware diagnostic support and repair
is available for three years from date of purchase. Support for software
and initial setup is available for 90 days from date of purchase. Additional
support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack
services or customized service agreements.
NOTE: Limited warranty includes 3 year
parts, 3 year labor, 3-year on-site support.
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
- Installation and start up
- Education courses
- Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
- Comprehensive range of software technical support for Microsoft, Linux,
ProLiant Essentials and VMWare-based IT solutions helping to deliver
high level of application availability. Response times range from 30
mins for critical problems to 2 hours.
- System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack Services include HP branded hardware options qualified for
the server, purchased at the same time or afterwards, internal to the
enclosure, as well as 22" and smaller external monitors and tower
UPS options up to 3KVA. 22" and smaller external monitors will be
covered at the same service level and coverage period as the server. For
servers or storage systems installed within a rack, service also covers
all HP qualified rack options installed within the same rack.
|
|
NOTE: For more information on HP Care
Pack services, contact any of our worldwide sales offices or resellers
or visit our worldwide Web site on the internet at: https://www.hp.com/hps/carepack
NOTE: For more complete information
on HP Services offerings, customers and resellers, please visit us at:
https://www.hp.com/hps
NOTE: Additional information regarding
worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
|
Solutions
| Solutions |
Designed for enterprise customers with growing data centers and application
and Internet service providers that require a rack optimized 4 processor
server that delivers maximum performance and high availability for highly
complex, business critical applications. Specifically, the HP ProLiant
DL580 G2 would be excellent for running the following types of applications:
Typical Usage:
- Databases
- Large
Scale Mail Servers
- ERP/CRM/SCM
For more solutions visit: https://www.hp.com/solutions/proliantdl580. |
Models
DL580R02 X3.0
GHz-4MB, 2048MB (2P)
347905-001 |
Processor(s) |
(2) Intel Xeon Processors MP
at 3.0 GHz standard (up to 4 supported) |
| Cache Memory |
4MB Integrated Level 3 Cache |
| Memory |
2048 MB PC1600 registered ECC
SDRAM (Standard) to 32 GB (Maximum)
(4x1 interleaved memory and HP Advanced Memory Protection Technology) |
| Network Controller |
Integrated dual port NC7170
PCI-X Gigabit Server Adapter in a slot |
| Storage Controller |
Smart Array 5i Plus Controller
(Dual Channel, Ultra3) with Battery-Backed Write Cache Enabler (integrated
on system board) |
| Manageability |
Integrated Lights-Out (iLO)
Standard management (integrated on system board) |
| Hard Drives |
None ship standard |
| Internal Storage |
1.20 TB maximum (with optional
hard drives) |
| Power Supply |
Two 800W Hot Plug Redundant
Power Supplies (low line or high line) |
| Optical Drive |
24x IDE slimline CD-ROM Drive |
| Diskette Drive |
1.44 MB Diskette Drive (slimline) |
| Form Factor |
Rack 4U |
|
DL580R02 X2.7
GHz-2MB, 2048MB (2P)
347904-001 |
Processor(s) |
(2) Intel Xeon Processors MP
at 2.7 GHz standard (up to 4 supported) |
| Cache Memory |
2MB Integrated Level 3 Cache |
| Memory |
2048 MB PC1600 registered ECC
SDRAM (Standard) to 32 GB (Maximum)
(4x1 interleaved memory and HP Advanced Memory Protection Technology) |
| Network Controller |
Integrated dual port NC7170
PCI-X Gigabit Server Adapter in a slot |
| Storage Controller |
Smart Array 5i Plus Controller
(Dual Channel, Ultra3) with Battery-Backed Write Cache Enabler (integrated
on system board) |
| Manageability |
Integrated Lights-Out (iLO)
Standard management (integrated on system board) |
| Hard Drives |
None ship standard |
| Internal Storage |
1.20 TB maximum (with optional
hard drives) |
| Power Supply |
Two 800W Hot Plug Redundant
Power Supplies (low line or high line) |
| Optical Drive |
24x IDE slimline CD-ROM Drive |
| Diskette Drive |
1.44 MB Diskette Drive (slimline) |
| Form Factor |
Rack 4U |
|
DL580R02 X2.2
GHz-2MB, 1024MB (1P)
347903-001 |
Processor(s) |
(1) Intel Xeon Processors MP
at 2.2 GHz standard (up to 4 supported) |
| Cache Memory |
2MB Integrated Level 3 Cache |
| Memory |
1024 MB PC1600 registered ECC
SDRAM (Standard) to 32 GB (Maximum)
(4x1 interleaved memory and HP Advanced Memory Protection Technology) |
| Network Controller |
Integrated dual port NC7170
PCI-X Gigabit Server Adapter in a slot |
| Storage Controller |
Smart Array 5i Plus Controller
(Dual Channel, Ultra3) (integrated on system board) |
| Manageability |
Integrated Lights-Out (iLO)
Standard management (integrated on system board) |
| Hard Drives |
None ship standard |
| Internal Storage |
1.20 TB maximum (with optional
hard drives) |
| Power Supply |
One 800W Hot Plug Redundant
Power Supplies (low line or high line) |
| Optical Drive |
24x IDE slimline CD-ROM Drive |
| Diskette Drive |
1.44 MB Diskette Drive (slimline) |
| Form Factor |
Rack 4U |
Options
| HP
ProLiant DL580 Unique Options |
8
GB PC1600 Registered
ECC SDRAM Memory Kit (4 x 2048 MB) |
|
| 4
GB PC1600 Registered
ECC SDRAM Memory Kit (4 x 1024 MB) |
|
| 2
GB PC1600 Registered
ECC SDRAM Memory Kit (4 x 512 MB) |
|
| 1
GB PC1600 Registered
ECC SDRAM Memory Kit (4 x 256 MB) |
|
Hot Plug Memory Expansion
Board
NOTE: The Hot Plug Memory Expansion
Board provides 8 additional DIMM slots for powering memory-intensive applications. |
|
| 800W Hot Plug Redundant
Power Supply US |
278535-001
|
| 800W Hot Plug Redundant
Power Supply -inc IEC |
278535-B21
|
| DL580 G2 24"
- 19" Rack Adapter Kit |
332815-B21 |
| DL580 G2 Folding
Cable Management Arm |
289294-B21
|
DL580
G2 Cable Assembly, SCSI, Ultra3, LVDS
NOTE: All HP ProLiant DL580 G2 models ship standard with the integrated
Smart Array 5i Plus Controller, which has been designed to deliver maximum
performance and availability across the internal SCSI Duplex backplane. |
288874-B21
|
- The Ultra3 SCSI cable is required only if the customer chooses to
bypass the Smart Array 5i Plus Controller and connect slot-based SCSI
adapters or RAID controllers to the internal SCSI Duplex backplane.
- Two cables are required to maintain the standard, duplexed configuration
of the backplane.
- One cable is required if the simplex configuration is chosen
|
|
| The backplane
is easily configured to simplex mode by means of a simple switch duplex
to simplex) located on the top of the backplane itself. |
|
| Cord, AC Line, 20A,
250V, US 12' |
235604-001
|
| Cord, AC Line, 15A,
125V |
235603-001
|
Cable, 10A, IEC320-C20
to IEC320-C19
NOTE: Power cord (295633-B22) connects
ProLiant servers to PDUs or UPSs with IEC320-C19 output connections. |
295633-B22
|
Cable, 10A, IEC320-C14
to IEC320-C19 8FT
NOTE: Power cord (291034-B21) connects
HP ProLiant DL580 G2 servers to PDUs or UPSs with IEC320-C13 output connections.
This power cord has been specifically designed to work with the HP ProLiant
DL580 G2 server. Please NOTE the following important precautions
when deploying this power cord: |
291034-B21
|
- Use the cord only in conjunction with the HP ProLiant DL580 G2 server.
- Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs
or UPSs with IEC320-C13 output connections.
- Do not use the cord with any other HP ProLiant or third party server.
- Do not use the cord with any other office equipment or computers.
- Do not use the cord as an extension cord.
- Do not plug the cord into a wall outlet.
- Failure to adhere to these precautions may invalidate the server warranty.
|
|
|
Cable, 10A, IEC320-C14 to IEC320-C19 10FT
NOTE: Power cord (310927-B21) connects HP ProLiant DL580 G2 servers
to PDUs or UPSs with IEC320-C13 output connections. This power cord has
been specifically designed to work with the HP ProLiant DL580 G2 server.
Please NOTE the following important precautions when deploying
this power cord:
|
310927-B21
|
- Use the cord only in conjunction with the HP ProLiant DL580 G2 server.
- Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs
or UPSs with IEC320-C13 output connections.
- Do not use the cord with any other HP ProLiant or third party server.
- Do not use the cord with any other office
equipment or computers.
- Do not use the cord as an extension cord.
- Do not plug the cord into a wall outlet.
- Failure to adhere to these precautions may invalidate the server warranty
|
|
Cable,
10A, IEC320-C14 to IEC320-C19 6FT
NOTE: Power cord (313227-B21) connects HP ProLiant DL580 G2 servers
to PDUs or UPSs with IEC320-C13 output connections. This power cord has
been specifically designed to work with the HP ProLiant DL580 G2 server.
Please NOTE the following important precautions when deploying this
power cord |
313227-B21
|
- Use the cord only in conjunction with the HP ProLiant DL580 G2 server.
- Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs
or UPSs with IEC320-C13 output connections.
- Do not use the cord with any other HP ProLiant or third party server.
- Do not use the cord with any other office
equipment or computers.
- Do not use the cord as an extension cord.
- Do not plug the cord into a wall outlet.
- Failure to adhere to these precautions may invalidate the server warranty
|
|
Cable,
10A, IEC320-C14 to IEC320-C19 12FT
NOTE: Power cord (313228-B21) connects HP ProLiant DL580 G2 servers
to PDUs or UPSs with IEC320-C13 output connections. This power cord has
been specifically designed to work with the HP ProLiant DL580 G2 server.
Please NOTE the following important precautions when deploying this
power cord:
|
313228-B21
|
- Use the cord only in conjunction with the HP ProLiant DL580 G2 server.
- Use the cord to connect the HP ProLiant DL580 G2 server only to PDUs
or UPSs with IEC320-C13 output connections.
- Do not use the cord with any other HP ProLiant or third party server.
- Do not use the cord with any other office
equipment or computers.
- Do not use the cord as an extension cord.
- Do not plug the cord into a wall outlet.
- Failure to adhere to these precautions may invalidate the server warranty
|
|
|
ProLiant
Essentials
Value Pack Software |
ProLiant Essentials
Integrated Lights-Out Advanced Pack |
|
ProLiant Essentials
Integrated Lights-Out Advanced Pack, 1 server
Featuring:
sophisticated virtual administration
features for ultimate control of servers in the data centers and remote
sites. |
|
| NOTE:
For additional ProLiant Integrated Light-Out Advanced Pack License
Kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11052_na/11052_na.html |
|
| ProLiant Essentials
Intelligent Networking Pack |
|
ProLiant Essentials
Intelligent Networking Pack, Single Server License
NOTE: For use with a single server. Contains one license with a unique
license activation key and documentation. |
372906-B21
|
| NOTE:
For additional ProLiant Intelligent Networking Pack - Windows License
Kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12062_na/12062_na.html
|
|
| ProLiant Essentials
Intelligent Networking Pack - Linux Edition, Single Server License |
397004-B21
|
NOTE:
For additional ProLiant Intelligent Networking Pack - Linux License
Kits please see the QuickSpecs at:
https://h18000.www1.hp.com/products/quickspecs/12327_na/12327_na.html
|
|
| ProLiant Essentials
Performance Management Pack |
|
ProLiant Essentials
Performance Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key, HP Management
CD and documentation.
NOTE: The most recent version of the software can always be downloaded
at https://www.hp.com/products/pmp. |
306696-B21
|
| NOTE:
For additional ProLiant Performance Management Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11925_na/11925_na.html
|
|
| ProLiant Essentials
Rapid Deployment Pack Windows Edition and Linux Edition Release |
|
Rapid Deployment
Pack, Single-Server License
NOTE: This license allows 1 server to be deployed and managed via
RDP. |
267196-B21
|
NOTE:
For additional ProLiant Essentials Rapid Deployment Pack License Kits
please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html
https://h18000.www1.hp.com/products/quickspecs/11713_na/11713_na.html |
|
| ProLiant Essentials
Workload Management Pack |
|
| ProLiant Essentials
Workload Management Pack, Single Server License |
|
| NOTE:
For additional ProLiant Workload Management Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11452_na/11452_na.html
|
|
| ProLiant Essentials
Virtual Machine Management Pack |
|
ProLiant Essentials
Virtual Machine Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
|
372214-B21
|
| NOTE:
For additional ProLiant Virtual Machine Management Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12110_na/12110_na.html
|
|
| ProLiant Essentials
Vulnerability and Patch Management Pack |
|
ProLiant Essentials
Vulnerability and Patch Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation. |
371645-B21
|
| NOTE:
For additional ProLiant Vulnerability and Patch Management Pack License
Kits, please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12111_na/12111_na.html
|
|
NOTE:
Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials. |
|
|
| Processor |
Intel Xeon MP X3.00 GHz-4MB Processor
Option Kit
NOTE: This processor option kit (PN
345323-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580
G2. |
345323-B21 |
Intel Xeon MP X2.70 GHz-2MB Processor
Option Kit
NOTE: This processor option kit (PN
345322-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580
G2.
|
345322-B21 |
Intel Xeon MP X2.20 GHz-2MB Processor
Option Kit
NOTE: This processor option kit (PN
345321-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580
G2.
|
345321-B21 |
Intel Xeon MP X2.80 GHz-2MB Processor
Option Kit
NOTE: This processor option kit (PN
325254-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580
G2.
|
325254-B21
|
Intel Xeon MP X2.50 GHz-1MB Processor
Option Kit
NOTE: This processor option kit (PN
325253-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580
G2.
|
325253-B21
|
Intel Xeon MP X2.0 GHz-1MB Processor
Option Kit
NOTE: This processor option kit (PN
325252-B21) supports the HP ProLiant ML570 G2 and the HP ProLiant DL580
G2.
|
325252-B21
|
|
|
DL580 G2 Memory (DIMMs)
|
8
GB PC1600 Registered ECC SDRAM Memory
Kit (4 x 2048 MB) |
|
| 4 GB PC1600 Registered ECC SDRAM Memory
Kit (4 x 1024 MB) |
|
| 2
GB PC1600 Registered ECC SDRAM Memory
Kit (4 x 512 MB) |
|
| 1 GB PC1600 Registered ECC SDRAM Memory
Kit (4 x 256 MB) |
|
Hot Plug Memory Expansion Board
NOTE: The Hot Plug Memory Expansion
Board provides 8 additional DIMM slots for powering memory-intensive applications. |
|
|
| Optical Drives |
Slimline CD-RW/DVD-ROM Combo Drive
Option Kit
NOTE: Ejectable drive.
|
|
Slimline DVD-ROM Drive (8X/24X)
Option Kit (Servers)
NOTE: Ejectable drive.
|
264007-B21 |
| HP DVD+R/RW 8X Slim |
383975-B21 |
|
| DL580 G2 Hard Drives |
Ultra320 SCSI - Universal
Hot Plug |
|
| 300-GB 10,000 rpm U320 Universal
Hard Drive (1") |
|
| 146.8-GB 10,000 rpm U320 Universal
Hard Drive (1") |
|
| 72.8-GB 10,000 rpm U320 Universal
Hard Drive (1") |
|
| 146.8-GB 15,000 rpm U320 Universal
Hard Drive (1") |
|
| 72.8-GB 15,000 rpm U320 Universal
Hard Drive (1") |
|
| 36.4-GB 15,000 rpm U320 Universal
Hard Drive (1") |
|
| NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support
U320 transfer rates. |
|
NOTE: Please see
the Hard Drive QuickSpecs for Technical Specifications such as capacity,
height, width, interface, transfer rate, seek time, physical configuration,
and operating temperature:
U320 Hard Drive QS:
https://h18000.www1.hp.com/products/quickspecs/11531_na/11531_na.html |
|
|
|
Storage Controllers | Smart
Array 6402/128 Controller | |
| Smart Array 6404/256 Controller | 273914-B21 | | 512MB
DDR BBWC Upgrade | |
| Smart Array 641 Controller |
| | Smart
Array 642 Controller | |
| 256MB Battery-Backed Cache
Module
NOTE: This 256-MB Battery-Backed
Cache Module supports the Smart Array 5300 series controllers, HP Modular Smart
Array 1000 and the HP Modular Smart Array 500. |
254786-B21 | Battery-Backed
Write Cache Enabler Option Kit
NOTE: This
Battery-Backed Write Cache Enable Option Kit (PN 255514-001) is optional for the
1P Model only. | |
128MB
Battery-Backed Cache Enabler
NOTE: This 128MB BBWC supports
the Smart Array 641 Controller and Smart Array 642 Controller.
|
| DL580
G2 Cable Assembly, SCSI, Ultra3, LVDS
NOTE: All DL580 G2 models
ship standard with the integrated Smart Array 5i Plus Controller, which has been
designed to deliver maximum performance and availability across the internal SCSI
Duplex backplane. | 288874-B21 |
- The Ultra3
SCSI cable is required only if the customer chooses to bypass the Smart Array
5i Plus Controller and connect slot-based SCSI adapters or RAID controllers to
the internal SCSI Duplex backplane.
- Two cables are required to maintain
the standard, duplexed configuration of the backplane.
- One cable
is required if the simplex configuration is chosen.
| |
| The backplane is easily
configured to simplex mode by means of a simple switch duplex to simplex) located
on the top of the backplane itself. | |
| 64-Bit/133-MHz Dual Channel Ultra320
SCSI Adapter | |
| 64-Bit/66-MHz Dual Channel Wide
Ultra3 SCSI Adapter, Alternate OS |
| Smart
Array 6404/256 Controller
| 273914-B21 |
Ultra320 Expansion Module for
SA-6402
| 273911-B21 |
NOTE: Please
see the following Controller or SCSI Adapter QuickSpecs for Technical Specifications
such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak
Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support,
and additional information:
https://h18000.www1.hp.com/products/quickspecs/11587_na/11587_na.html
(Smart Array 6400 Series)
https://h18000.www1.hp.com/products/quickspecs/12067_na/12067_na.html
(Smart Array 641)
https://h18000.www1.hp.com/products/quickspecs/12069_na/12069_na.html
(Smart Array 642)
https://h18000.www1.hp.com/products/quickspecs/10429_na/10429_na.html
(SCSI Adapter)
https://h18000.www1.hp.com/products/quickspecs/11555_na/11555_na.html
(U320 Adapter) | |
|
|
Communications
|
HP NC310F PCI-X 1000SX Gigabit
Server Adapter |
|
| HP NC7170 PCI-X Dual Port 1000T
Gigabit Server Adapter |
|
| HP NC7771 PCI-X 1000T Gigabit
Server Adapter |
|
| HP NC570C PCI-X Dual-port 4x Fabric
Adapter |
376158-B21
|
| HP 24-Port 4x Fabric Copper Switch |
376227-B21
|
| HP 1m 4x Fabric Copper Cable |
376232-B21
|
| HP 3m 4x Fabric Copper Cable |
376232-B22
|
| HP 5m 4x Fabric Copper Cable |
376232-B23
|
|
|
Redundant Options
|
800W Hot Plug Redundant Power
Supply |
278535-001
|
| 800W Hot Plug Redundant Power
Supply -inc IEC |
278535-B21
|
|
|
Management Options
|
Remote Insight Lights-Out Edition II
|
227251-001
|
|
|
Tape Drives
|
|
NOTE: For the complete listing
of Tape drive offerings for this server, please visit:
https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For recommended tape drive offerings
for this ProLiant server see the following:
|
|
| Hot Plug Tape Drives |
|
| HP StorageWorks DAT 72 SCSI
Hot-plug Tape Drive (Carbon) |
|
| USB Tape Drives |
|
| HP StorageWorks DAT 72 USB
External Tape Drive (Carbonite) |
|
| External and Rack-Mount
Ultrium Tape Drives |
|
HP StorageWorks Ultrium
232 Internal Tape Drive (Carbonite)
NOTE: No internal tape drives
fit inside this HP ProLiant server (except hot plug tape). The internal
drive shown here is for the 1U and 3U Rack-mount Kit.
|
|
| HP StorageWorks Ultrium
232 External Tape Drive (Carbonite) |
|
| HP StorageWorks Ultrium
460 External Tape Drive (Carbon) |
|
| HP StorageWorks Ultrium
448 External Tape Drive (Carbonite) |
DW017B
|
| HP StorageWorks 1U Rack-mount
kit with one Ultrium 448 (Carbonite) |
DW028A
|
| HP StorageWorks Ultrium
960 External Tape Drive (Carbonite) |
|
| HP StorageWorks 3U Rack-mount
kit with one Ultrium 960 (Carbonite) |
|
NOTE: Please
see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional
options such as controllers, media, and other related items:
https://h18006.www1.hp.com/products/quickspecs/11739_na/11739_na.html
For an up-to-date listing of the latest O/S and software support details
for HP Ultrium tape drives, please visit: https://www.hp.com/go/connect.
|
|
| Rack-Mount Tape Drive
Enclosures |
|
HP StorageWorks 1U Rack-Mount
Kit
NOTE: The 1U Rack-mount Kit
can support up to (2) half-height tape drives and compatible with
multiple Single-Ended and LVD SCSI tape drives including the DAT 24,
DAT 40, DAT 72, DLT VS80, DLT VS160, Ultrium 215, Ultrium 232 and
Ultrium 448 tape drives.
|
|
| HP StorageWorks 1U USB Rack-Mount
Kit |
|
1U USB Cable Option Kit
NOTE: Converts a 1U SCSI rack-mount
kit to a USB interface to support the USB tape drives.
|
|
HP StorageWorks 3U Rack-Mount
Kit
NOTE: The 3U Rack-mount Kit
can support up to (2) full-height or (4) half-height tape drives and
compatible with multiple Single-Ended and LVD SCSI tape drives including
DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160, SDLT 320, SDLT 600, Ultrium
215, Ultrium 230, Ultrium 232, Ultrium 460, Ultrium 448 and Ultrium
960 tape drives.
|
274338-B23
|
NOTE:
Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional
information regarding these kits:
https://h18000.www1.hp.com/products/quickspecs/10854_na/10854_na.html |
|
|
|
Tape Autoloaders
|
DAT Autoloader
|
|
HP StorageWorks DAT 72x6 Autoloader
(External)
|
Q1567A |
NOTE: Please see
the DAT 72x6 Tape Autoloader QuickSpecs for additional options such as host
bus adapters, controllers and media:
https://h18006.www1.hp.com/products/quickspecs/11905_na/11905_na.html
|
|
HP StorageWorks 1/8 Tape Autoloader
|
|
| HP StorageWorks 1/8 Ultrium 960
Tape Autoloader |
AF204A |
| HP StorageWorks 1/8 Ultrium 448
Tape Autoloader |
AF203A |
| HP StorageWorks 1/8 SDLT 320 Tape
Autoloader |
AA926A |
| HP StorageWorks 1/8 Ultrium 232
Tape Autoloader |
AF202A |
1/8
Tape Autoloader Rackmount Kit
NOTE: Required to install the unit in a standard 19-inch rack; includes
rails and rackmount instructions
|
C9268R |
| NOTE: Please reference
the 1/8 Tape Autoloader QuickSpecs at https://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at https://www.hp.com/go/ebs |
|
| HP StorageWorks SSL1016 Tape
Autoloader |
|
| HP StorageWorks SSL1016 Ultrium
460 Tape Autoloader |
330821-B21 |
| HP StorageWorks SSL1016 SDLT 320
Tape Autoloader |
330816-B21 |
NOTE: Please reference
the SSL1016 Tape Autoloader QuickSpecs at https://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at https://www.hp.com/go/ebs
|
|
|
|
Ultra Density Optical Jukeboxes
|
1900ux, 4 drive, 64 slot jukebox
| AA966A |
| 3800ux, 4 drive, 128 slot jukebox
| AA969A |
| 7100ux, 6 drive, 238 slot jukebox
| AA971A |
|
NOTE: Please see the HP StorageWorks Ultra Density Optical Jukeboxes
QuickSpecs for a complete listing of available jukeboxes at:
https://h18006.www1.hp.com/products/quickspecs/11944_div/11944_div.html
NOTE: Please reference the Ultra Density Optical Jukebox QuickSpecs
at https://www.hp.com/go/optical
for additional information needed to create a complete solution
| |
|
|
HP StorageWorks Modular Smart Array 20
|
HP StorageWorks Modular Smart
Array 20
NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity,
redundant power supplies.
|
335921-B21 |
HP StorageWorks Modular Smart
Array 20 Starter Kit
NOTE: Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity,
redundant power supplies. Includes Smart Array 6402/128 Controller.
|
366172-B21 |
| NOTE: The Modular
Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 1" Hot Plug
Hard Drives. |
|
|
|
HP StorageWorks Modular Smart Array 30
|
HP StorageWorks Modular Smart
Array 30 SB
NOTE: Rack-mountable 14 drive enclosure with single bus, redundant
power supplies
|
302969-B21 |
HP StorageWorks Modular Smart
Array 30 DB
NOTE: Rack-mountable 14 drive enclosure with dual bus, redundant
power supplies
|
302970-B21 |
| NOTE: The Modular
Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 1"
Hot Plug Hard Drives. |
|
|
|
HP StorageWorks Modular Smart Array 500 G2
|
HP StorageWorks Modular Smart
Array 500 Generation 2 |
335880-B21
|
NOTE: Please see
the Modular Smart Array 500 Generation 2 QuickSpecs for additional information
including configuration steps and additional options needed for a complete
solution at:
https://h18000.www1.hp.com/products/quickspecs/11956_na/11956_na.html |
|
|
|
HP StorageWorks Modular Smart Array 1500 cs
|
Modular Smart Array 1500 Controller Shelf
|
AA986A
|
NOTE: Please see
the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options
and configuration information at:
https://www.hp.com/go/MSA1500cs
|
|
|
|
Uninterruptible Power Systems – Rack
|
HP UPS R1500 XR (1440VA, 1340 Watt), Low Voltage
|
204404-001
|
|
HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage
|
192186-001
|
|
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage
|
192186-002
|
|
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A IEC309 Plug)
|
192186-B32
|
|
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A CEE 7/7 SCHUKO
Plug)
|
192186-B33
|
|
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (16A BS-546 Plug)
|
192186-AR1
|
| HP UPS R5500 XR, (5000VA, 4500
Watt), High Voltage |
326529-D71 |
HP UPS R12000 XR N+x (200-240V)
(WW-hardwired)
NOTE: The UPS R12000 XR has a hardwired
input and output; requires a 100A circuit. |
207552-B22
|
|
|
HP Monitored Power Distribution Unit
(PDU)
|
HP Monitored Power Distribution
Unit: Full Rack Version |
|
| HP PDU with Power Monitoring,
Model S2324 - dual input, 3-phase, 24A |
|
| HP Power Distribution Unit with
Power Monitoring Model S1324 - single input, 3 phase, 24A |
|
| HP Power Distribution Unit with
Power Monitoring Model S2140 - dual input, 1 phase, 40A |
|
| HP Power Distribution Unit with
Power Monitoring Model S1140 - single input, 1 phase, 40A |
|
|
|
Modular Power Distribution Units 1U/0U
(Up to 32 outlets)
NOTE: 1U/0U mounting brackets
shipped with
the unit (optimized for 10000 and 9000 series racks).
|
Modular Power Distribution Units
(mPDU), Low Volt Model, 24A (100-127 VAC)
NOTE: This model has a detachable
input power cord and is adaptable to country specific requirements. The
16A PDU also connects to the high volt models of the UPS R3000 XR and R6000
models. Cable P/N 340653-001 required if connecting to UPS R3000 XR ( 192186-002
NA -High Volt model only). |
|
Modular Power Distribution Units
(mPDU), High Volt Model, 24A (200-240 VAC)
NOTE: L6-30 input. |
|
NOTE: Please see
the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs
for additional options including cables:
https://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html |
|
|
| USB Options |
USB 2-Button Optical Scroll Mouse
(Carbonite/Silver) |
|
| |
USB 1.44-MB External Diskette
Drive (Carbonite) |
DC141B
|
|
| Third Party Rack Kit |
3rd Party Rack Kit
NOTE: The rack kit (PN 287528-B21)
provides support for any rack, square hole or round hole, (including HP
Rack System /E and HP Systems), with an adjustment range from 23 ½"
- 34" deep.
NOTE: The Third party rack kit is required for round hole racks or
for square hole racks that do not conform to the adjustment range of the
standard rail that ships with the server.
|
287528-B21
|
|
| Telco Rack Support |
Rack Adapter Kit
NOTE: This kit allows HP rack servers
to fit in racks that are 24" wide.
|
332815-B21
|
| NOTE: Support
for all 2-post Telco racks requires the Third Party option kit 287528-B21,
plus an additional option kit from Rack Solutions. The Rack Solutions brackets
can be purchased at: https://www.racksolutions.com/hp. |
|
|
| HP Rack 5000 Series
(Graphite Metallic) |
HP 5642 Rack-Unassembled |
|
|
| Rack Options for Rack
5000 Series |
Stabilizer Kit for 5642 rack (Graphite
Carbon)
NOTE: The stabilizing kit is used
to prevent rack from tipping over.
|
374493-B21
|
Baying Kit for 5642 rack (Graphite
Carbon)
NOTE: The baying kit is used to join
two or more HP 5642 racks.
|
374499-B21
|
|
|
HP Rack 10000 Series
(Graphite Metallic)
|
10642 (42U) Infrastructure Rack
(Low Voltage) |
379006-001
|
| 10642 (42U) Infrastructure Rack
(High Voltage) |
|
| HP Rack S10614 (14U) Rack Cabinet
– Shock Pallet |
|
|
HP Rack 10842 (42U, 800mm wide) – Pallet
|
257415-B21
|
|
HP Rack 10842 (42U, 800mm wide) – Shock Pallet
|
257415-B22
|
|
HP Rack 10647 (47U) – Pallet
|
245160-B21
|
|
HP Rack 10647 (47U) – Crated
|
245160-B23
|
|
HP Rack 10642 (42U) – Pallet
|
245161-B21
|
|
HP Rack 10642 (42U) – Shock Pallet
|
245161-B22
|
|
HP Rack 10642 (42U) – Crated
|
245161-B23
|
|
HP Rack 10636 (36U) – Pallet
|
245162-B21
|
|
HP Rack 10636 (36U) – Shock Pallet
|
245162-B22
|
|
HP Rack 10636 (36U) – Crated
|
245162-B23
|
|
HP Rack 10622 (22U) – Pallet
|
245163-B21
|
|
HP Rack 10622 (22U) – Shock Pallet
|
245163-B22
|
|
HP Rack 10622 (22U) – Crated
|
245163-B23
|
|
NOTE: -B21 (pallet) used to ship empty
racks shipped on a truck
-B22 (shock pallet) used to ship racks with equipment installed (by custom
systems, VARs and Channels)
-B23 (crated) used for air shipments of empty racks
|
|
|
NOTE: Please see the Rack 10000 QuickSpecs
for Technical Specifications such as height, width, depth, weight, and
color:
https://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.html
|
|
|
NOTE: For additional information regarding
Rack Cabinets, please see the following URL: https://h18000.www1.hp.com/products/servers/proliantstorage/rack-options/index.html.
|
|
|
|
Rack Options for HP
Rack 10000 Series
|
HP Rack Light Kit (Neon) |
|
| HP Rack Plinth Kit (Carbon) |
|
|
42U Side Panel – Graphite Metallic
|
246099-B21
|
|
36U Side Panel – Graphite Metallic
|
246102-B21
|
|
47U Side Panel – Graphite Metallic
|
255486-B21
|
TFT7210R Rack Mounted 17" Monitor
NOTE: For a complete list of Monitors
please view the following URL:
https://h18004.www1.hp.com/products/monitors/. |
|
TFT5600 Rack Keyboard Monitor
NOTE: For a complete list of Monitors
please view the following URL:
https://h18004.www1.hp.com/products/monitors/. |
|
| 1U Rack Keyboard & Drawer
(Carbon) |
|
|
| HP KVM Switch Options |
IP Console Switch Box (KVM/IP),
3 x 1 x 16 |
|
| IP Console Switch Box (KVM/IP),
1 x 1 x 16 |
|
| Server Console Switch (KVM), 0
x 1 x 8 port |
|
| Server Console Switch (KVM), 0
x 2 x 16 port |
|
| PS/2 Interface Adapter, 1 pack |
|
| PS/2 Interface Adapter, 8 pack |
|
| USB Interface Adapter, 1 pack |
|
| Serial Interface adapter - 1 Pack
with power supply |
|
| NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: https://www.hp.com/go/kvm.
|
|
| HP 1x 4 USB/PS2 KVM Switch, TT
|
371301-D71
|
| HP 1x 4 USB/PS2 KVM Switch, RM
|
371302-B21
|
| HP PS2 KVM Cable with audio, 6',
2-pack |
371730-B21
|
| HP USB KVM Cable with audio, 6',
2-pack |
371729-B21
|
| NOTE:
For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following
URL: https://www.hp.com/go/kvm.
|
|
|
|
HP Serial Console Server Options
|
HP 16 Port Serial Console Server
|
|
| HP 48 Port Serial Console Server
|
|
| Serial Adapter, RJ45-DB9 DCE Female,
1 Pack |
|
| Serial Adapter, RJ45-DB9 DCE Female,
8 Pack |
AF110A
|
| NOTE:
Cat5e cables are required to connect Serial Adapters to Serial Console Servers.
Additional Serial Adapters and Cat5e cables can be found at the following
URL: https://www.hp.com/go/kvm.
|
|
| NOTE:
For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following
URL: https://www.hp.com/go/kvm. |
|
|
|
Service and Support Offerings (HP
Care Pack Services)
|
| Hardware
Services On-site Service |
|
| 4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic |
U4607E
|
| 4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic |
U4608E
|
|
| 6-Hour Call to Repair,
On-site Service 7-Day x 24-Hour Coverage, 3 Years (U.S. Part Number) |
|
| 6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
U4609E
|
| Installation &
Start-up Services |
|
| Hardware Installation, Electronic |
U4617E
|
| Installation & Start-Up
of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays, Electronic |
U4618E
|
|
| Support Plus |
|
| Onsite HW support, 8am-9pm,
M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays,
Electronic |
U4619E
|
| Onsite HW support, 8am-9pm,
M-F, 4hr response and Linux O/S SW Tech support offsite, onsite at
HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays,
Electronic |
U4621E
|
|
| Support Plus 24 |
|
| Onsite HW support 24x7,
4hr response and Microsoft O/S SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic |
U4620E
|
| Onsite HW support 24x7,
4hr response and Linux O/S SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time incl. HP holidays, Electronic |
U4622E
|
| NOTE: For
more information, customer/resellers can contact: https://www.hp.com/services/carepack |
|
|
Memory
| HP ProLiant DL580
G2 2P Models |
|
Standard Memory
2048 MB 200MHz Double Data Rate (DDR) SDRAM (PC1600 Registered SDRAM Memory
with Advanced ECC functionality)
Standard Memory Plus Optional Memory and Optional Memory board
Up to 26,624 MB memory is available with the optional installation of
PC1600 Registered ECC SDRAM Memory kits and a second, optional memory
board.
Standard Memory Replaced with Optional Memory and
Optional memory board
Up to 32,768 MB of memory is available with the removal of the standard
2048 MB of memory, the optional installation of PC1600 Registered ECC
SDRAM Memory kits, and a second, optional memory board.
NOTE: Memory must be added in banks
of four DIMMS. This chart does not represent all possible memory configurations.
|
|
Standard Memory Summary
|
Standard Memory Board (Slots)
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
Standard
|
2048 MB
|
512 MB
|
512 MB
|
512 MB
|
512 MB
|
Empty
|
Empty
|
Empty
|
Empty
|
|
Optional 2nd Memory Board (Slots)
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
|
Optional Memory Summary
|
Standard Memory Board (Slots)
|
|
Optional (Standard Memory Plus Optional Memory Board
and Optional Memory)
|
26,624 MB
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
512 MB
|
512 MB
|
512 MB
|
512 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
|
Optional 2nd Memory Board (Slots)
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048MB
|
2048 MB
|
2048 MB
|
2048 MB
|
|
Maximum Memory Summary
|
Standard Memory Board (Slots)
|
|
Maximum (Standard Memory Replaced with Optional Memory
with Optional Memory board)
|
32,768 MB
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
2048 MB
|
2048 MB
|
2048MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
|
Optional 2nd Memory Board (Slots)
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
| HP ProLiant DL580 G2 1P Models |
|
Standard Memory
1024 MB 200MHz Double Data Rate (DDR) SDRAM (PC1600 Registered SDRAM Memory
with Advanced ECC functionality
Standard Memory Plus Optional Memory and Optional memory board
Up to 25,600 MB memory is available with the optional installation of
PC1600 Registered ECC SDRAM Memory kits and a second, optional memory
board.
Standard Memory Replaced with Optional Memory and
optional memory board
Up to 32,768 MB of memory is available with the removal of the standard
1024 MB of memory, the optional installation PC1600 Registered ECC SDRAM
Memory kits, and a second, optional memory board.
NOTE: Memory must be added in banks
of four DIMMS. This chart does not represent all possible memory configurations.
|
|
Standard Memory Summary
|
Standard Memory Board (Slots)
|
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
Standard
|
1024 MB
|
256 MB
|
256 MB
|
256 MB
|
256 MB
|
Empty
|
Empty
|
Empty
|
Empty
|
|
Optional 2nd Memory Board (Slots)
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
Empty
|
|
Optional Memory Summary
|
Standard Memory Board (Slots)
|
|
Optional (Standard Memory Plus Optional
Memory Board and Optional Memory)
|
25,600 MB
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
256 MB
|
256 MB
|
256 MB
|
256 MB
|
2048MB
|
2048MB
|
2048MB
|
2048MB
|
|
Optional 2nd Memory Board (Slots)
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
2048MB
|
2048MB
|
2048MB
|
2048MB
|
2048MB
|
2048MB
|
2048MB
|
2048MB
|
|
Maximum Memory Summary
|
Standard Memory Board (Slots)
|
|
Maximum (Standard Memory Replaced
with Optional Memory with Optional Memory board)
|
32,768 MB
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
|
Optional 2nd Memory Board (Slots)
|
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
2048 MB
|
| |
|
|
The following memory options are available from HP:
|
|
- 1 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 256 MB)
|
|
- 2 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 512 MB)
|
|
- 4 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 1024 MB)
|
|
- 8 GB PC1600 Registered ECC SDRAM Memory Kit (4 x 2048 MB)
|
|
| Expand your memory capacity with
the Hot Plug Memory Expansion Board. Provides 8 additional DIMM slots for
powering memory-intensive applications. |
- Hot Plug Memory Expansion Board
|
|
Storage
|
|
A
|
Diskette Drive eject button |
|
B
|
Ejectable: 24x IDE CD-ROM (Slimline) |
|
C
|
Ejectable: 1.44-MB Diskette Drive
(Slimline) |
|
D
|
CD-ROM Drive eject button |
|
E
|
800-Watt (low line or high line)
Redundant Hot Plug Power Supply |
|
F
|
800-Watt (low line or high line)
Primary Hot Plug Power Supply |
|
0-3
|
Wide Ultra3 Drive Cage (Duplex
or Simplex configurable). Duplex is standard shipping configuration |
|
|
| Drive Support |
|
| |
Quantity
Supported
|
Position
Supported
|
Controller
|
| |
Ejectable Slimline Drives
|
|
|
|
| |
1.44-MB slimline Diskette Drive |
Up to 1 |
C |
Integrated |
| |
IDE slimline CD-ROM Drive |
Up to 1 |
B |
Integrated IDE |
| |
Slimline DVD-ROM Drive (8X/24X)
Option Kit |
Up to 1 |
B or C |
Integrated IDE |
|
|
DL580 G2 Hard Drives
|
| |
Ultra320 Hot Pluggable Drives |
| |
Quantity
Supported
|
Position
Supported
|
Controller
|
| |
1-inch
300-GB 10,000 rpm
146.8-GB 10,000 rpm
72.8-GB 10,000 rpm
146.8-GB 15,000 rpm
72.8-GB 15,000 rpm
36.4-GB 15,000 rpm |
Up to 4 |
0-3 |
Smart Array 5i Plus Controller
(integrated on system board)
Smart Array 6402/128 Controller
Smart Array 641 Controller
Smart Array 642 Controller
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter |
| |
NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support
U320 transfer rates. |
|
|
External Storage
|
| |
Quantity
Supported
|
Position
Supported
|
Host Controller or Adapter
|
| |
Modular Smart Array 30 Family
|
Up to 20
|
External
|
Smart Array 6402/128 Controller
Smart Array 6404/256 Controller
Smart Array 642 Controller
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| |
Modular Smart Array 500 System
|
1 |
External |
Smart Array 532 Controller (used
as Host Bus Adapter)
Please see the Modular Smart Array 500 QuickSpecs for the latest list of
supported HBAs: https://www.hp.com/go/msa500
|
| |
Modular Smart Array 1000 |
Please see
the Modular Smart Array 1000 QuickSpecs below to determine configuration
requirements |
External |
Please see the Modular Smart Array
1000 QuickSpecs (URL below) for the latest list of supported HBAs |
| |
Modular Smart Array 1500 cs |
Please see
the Modular Smart Array 1500 cs QuickSpecs below to determine configuration
requirements |
External |
Please see the Modular Smart Array
1500 cs QuickSpecs (URL below) for the latest list of supported HBAs |
| |
Modular Smart Array 1000: https://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.html
Modular Smart Array 1500 cs: https://www.hp.com/go/MSA1500cs
|
|
|
Maximum Storage Capacity – (External Enclosure Attached)
|
| |
Internal
|
1.20 TB (4 x 300-GB
Ultra320 SCSI 1" Drives) |
| |
External |
84.00 TB (20 x (14
x 300-GB Ultra320 SCSI 1" Drives)) |
| |
Total |
85.20 TB |
|
| Tape Drives, Tape Autoloaders,
& Tape Libraries |
|
NOTE:
For an up-to-date listing of the latest O/S Support details for each of
the Tape Drives listed below, please see the following:
https://h18000.www1.hp.com/products/quickspecs/north_america/10233.html
NOTE: For an
up-to-date listing of the latest O/S Support details for each of the Tape
Autoloaders and Tape Libraries listed below, please see the following:
https://h18000.www1.hp.com/products/quickspecs/north_america/10809.html
NOTE: For complete
listing of tape drive offerings see https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For details on connecting tape drives to this server, see the following:
|
| |
Quantity
Supported
|
Position
Supported
|
Controller
|
| |
HP StorageWorks Tape Drives,
Hot Plug
DAT 40 Hot Plug
DAT 72 Hot Plug |
1 |
0-3 |
Smart Array 5i Plus Controller
(integrated on system board)
64-Bit/133MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| |
|
|
|
HP StorageWorks Tape Drives,
USB External
DAT 24 USB
DAT 40 USB
DAT 72 USB
|
Up to 2 |
External |
USB Port |
| |
|
|
|
HP StorageWorks Tape Drives,
External
Ultrium 960
SDLT 600
|
1 per SCSI Channel |
External |
64-Bit/133MHz Dual Channel Ultra320
SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| |
|
|
|
HP StorageWorks Autoloaders,
External
DAT 72x6 Tape Autoloader
1/8 Tape Autoloader
SSL1016 Tape Autoloader
|
1 per SCSI channel |
External |
64-Bit/133MHz Dual Channel Ultra320
SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| |
|
|
|
HP StorageWorks Rack-mount
Tape Drive Enclosures
1U Rack-Mount Kit
3U Rack-Mount Kit
5U Rack-Mount Kit
|
1 per SCSI channel |
External |
64-Bit/133MHz Dual Channel Ultra320
SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| |
|
|
|
HP StorageWorks Tape Libraries,
External
MSL2024 (Ultrium 960-based)
MSL2024 (Ultrium 448-based)
MSL6000 (Ultrium 960-based)
MSL6000 (SDLT 600-based)
MSL6000 (Ultrium 460-based)
MSL5026S2 (SDLT 320-based)
MSL5052S2 (SDLT 320-based)
|
Please reference the
MSL Tape Library QuickSpecs to determine configuration requirements |
External |
Please consult the EBS connectivity
matrix at https://www.hp.com/go/ebs
for detailed connectivity information. |
Power Specifications
|
Part Number
|
278535-001 |
| Spare Kit |
192201-B21 |
| Operational Input Voltage Range
(V rms) |
90 to 264 |
| Frequency Range (Nominal) (Hz) |
47 to 63 (50/60) |
| |
|
| Nominal Input Voltage (Vrms) |
100
|
115
|
208
|
220
|
230
|
240
|
| Max Rated Output Wattage Rating |
800
|
800
|
800
|
800
|
800
|
800
|
| Nominal Input Current (A rms) |
11.7
|
9.9
|
5.2
|
4.9
|
4.7
|
4.5
|
| Max Rated Input Wattage Rating (Watts) |
1143
|
1111
|
1067
|
1067
|
1067
|
1053
|
| Max. Rated VA (Volt-Amp) |
1166
|
1134
|
1088
|
1088
|
1088
|
1074
|
|
Efficiency (%)
|
70
|
72
|
75
|
75
|
75
|
76
|
| Power Factor |
0.98
|
0.98
|
0.98
|
0.98
|
0.98
|
0.98
|
|
Leakage Current (mA)
|
.43
|
.50
|
.90
|
.96
|
1.00
|
1.04
|
| Maximum Inrush Current (A peak) |
25
|
25
|
25
|
25
|
25
|
25
|
|
Maximum Inrush Current duration
|
20
|
20
|
20
|
20
|
20
|
20
|
| |
| System Specifications |
|
HP ProLiant DL580 G2 Fully Configured
|
| |
Up to 4 Processors, 16 Memory Slots, 4 Hard
Drives, 6 PCI Slots, and 2 Hot Plug Power Supplies |
| Nominal Input Voltage (Vrms) |
100
|
115
|
208
|
220
|
230
|
240
|
| Fully Loaded System Input Wattage (W) |
954
|
928
|
890
|
890
|
890
|
879
|
| Fully Loaded System Input Current (A rms) |
10
|
8.5
|
4.4
|
4.1
|
4.0
|
3.7
|
| Fully Loaded System Thermal (BTU- Hr) |
3253
|
3163
|
3063
|
3063
|
3063
|
2996
|
|
Fully Loaded System VA (Volt-Amp)
|
1004
|
976
|
909
|
909
|
909
|
897
|
|
System Leakage with all power supplies loaded (mA)
|
.87
|
1.00
|
1.81
|
1.91
|
2.00
|
2.09
|
|
System Inrush Current with all power supplies loaded (A)
|
50
|
50
|
50
|
50
|
50
|
50
|
|
Power cord requirements
|
Nema 5-15P to IEC320-C19 |
Option no./Spare no: 235603-001/237457-001 |
PDU Jumper Cord IEC320-C19 to
IEC320-C20 |
Option no./Spare no: 295633-B21/295508-001 |
PDU Jumper Cord IEC320-C14 to
IEC320-C19 |
Option no./Spare no: 291034-001/292241-001 |
|
NOTES:
ActiveAnswers Power Calculation
Power calculator is LIVE
on ActiveAnswers website. This is an external link.
Follow this link: https://h30099.www3.hp.com/configurator/powercalcs.asp.
To drill down to calculators:
- Click on: "ProLiant
Servers"
- Click on the Server of interest. Example: DL580
G2
- Click on: "Power Calculator" link (You may need
to scroll down to see it.) | |
|
| Power Cord Part Number |
295529-001 |
Quickspecs
|
System Unit Rack
|
Chassis Footprint (HxWxD)
|
6.94 x 19 x 26.5 in (17.6 x 48.3 x 67.3 cm)
|
|
Weight
No hard drives installed,
one power supply
|
66 lb (29.9 kg) |
|
|
Input Requirements
|
Rated Input Voltage |
100 to 120 VAC/200 to 240 VAC |
| Rated Input Frequency |
50 to 60 Hz |
| Input Power |
1135W @ 110 VAC/1125W @ 220 VAC |
| Rated Input Current |
12A (100 VAC), 9.8A (120 VAC),
4.9A (220 VAC) |
| Max BTU Rating |
4000 BTU |
|
| Power Supply Output
Power (per power supply) |
Rated Steady-State Power |
800W/800W (lowline/highline) |
| Maximum Peak Power |
800W/800W (lowline/highline) |
| Temperature Range
|
Operating |
50° to 95° F (10°
to 35° C) |
| Non-operating |
-20° to 140° F (-29°
to 60° C) |
| Shipping |
-22° to 122° F (-30°
to 50° C) |
|
Relative Humidity
(non-condensing)
|
Operating |
10% to 70% |
| Non-operating |
5% to 95% |
|
Maximum Wet Bulb Temperature
|
101.7° F (38.7° C) |
|
| Acoustic Noise
|
NOTE: Listed are
the declared A-weighted sound power levels LWAd and the declared average
bystander position sound pressure levels LpAm when operating in a 23°
C ambient environment. Noise emissions were measured in accordance with
ECMA 74 and declared in accordance with ECMA 109. |
| Idle (Fixed Disk Drives Spinning) |
|
| |
L WAd (BELS) |
7.0 |
| |
L pAm (dBA) |
54 |
| NOTE: These values
apply to 2U rack configuration. Configuration tested included 2 processors,
two 10, 000 rpm hard drive, 1 power supplies, 1 power supply fan and 4 CPU
fans. |
|
|
24X Max (or higher) IDE CD-ROM Drive Slim Line
|
Disk
|
Applicable Disk
|
CD-DA, CD-ROM (Mode 1 and 2)
|
| |
CD-XA, CD-I (Mode 2, Form 1 and 2)
|
| |
|
Photo CD (Single and Multi-session)
|
| |
|
Mixed Mode (Audio and Data combined)
|
| |
Capacity
|
540 MB (Mode 1, 12 cm)
|
| |
|
650 MB (Mode 2, 12 cm)
|
| |
Diameter
|
4.7 x 3.15 in (12 x 8 cm)
|
| |
Rotational Speed
|
4200 rpm maximum
|
| |
Center Hole
|
0.6 in/15 mm diameter
|
| |
Thickness
|
1.2 mm
|
| |
Track Pitch
|
1.6 µm
|
| Block Size |
Mode 1 |
2,048 |
|
|
Mode 2 |
2,340, 2,336, 1,024 bytes |
| |
CD-DA |
2,352 bytes |
| |
CD-XA |
2,328 bytes |
|
Interface
|
IDE (ATAPI)
|
|
|
Access Times (typical)
|
Random
|
100 ms |
|
Full-Stroke
|
2000 ms |
|
Audio Output Level
|
Line-Out |
0.7 VRMS at 47 kOhms |
| Headphone |
0.6 VRMS at 32 kOhms (maximum volume) |
| Data Transfer Rate |
Sustained
|
150 KB/s (sustained 1X)
|
|
Burst
|
2100 to 3600 KB/s
|
|
Cache Buffer
|
128 KB
|
|
|
Start-up Time (typical)
|
< 7seconds
|
|
|
Stop Time
|
< 4seconds
|
|
|
Laser Parameters
|
Type |
Semiconductor Laser GaA1As |
| Wave Length |
780 ± 25 nm |
| Divergence Angle |
53.5° ± 1.5° |
| Output Power |
0.14 mW |
| Operating Conditions |
Temperature
|
41° to 113° F (5° to 45° C)
|
| |
Humidity
|
10% to 80%
|
|
Dimensions
|
(HxWxD, maximum)
|
1.69 x 5.75 x 8.19 in (4.29 x 15
x 20.8 cm) |
| |
Weight
|
2.66 lb (1.2 kg) |
|
|
Slimline CD-RW/DVD-ROM 24X Combo Drive (Multibay)
| Shipping
Dimensions | 13.88 x 11.38
x 9.25 in (35.26 x 28.91 x 23.50 cm) | |
Shipping Weight | 5 lb (2.27
kg) | |
| Disk |
Applicable Disk |
DVD-ROM | | |
| DVD-R (Read Only) |
| |
| 2.6 GB/side DVD-RAM
(Read Only) | | |
| 5.2 GB/side DVD-RAM
(Read Only) | | |
| CD-ROM Mode-1 data
disc | | | | CD-ROM
Mode-2 data disc | | | | CD
Audio disc | | | | CD-Extra |
| | | CD-RW |
| | | CD-R |
| | | CD
Text | | | | PhotoCD |
| | | CD-I
(mode 2) | | | | CD-I
Ready | | | | CD-Bridge |
| |
Capacity | DVD-ROM | DVD-SL | 4.7
GB/side | | | | | DVD-DL | 8.5
GB/side | | | | | Double
Sided | 9.40 GB/side |
| | | DVD-R | | 3.95
GB/side | | | | DVD-RAM | | 2.6
GB/side and 5.2 GB/ | | | | CD-ROM | Mode-1 | 650
MB (550 MB) | | | | | Mode-2 | 742
MB (640 MB) | | | Block
Size | DVD | | 2,048
bytes | | | | CD | | 2,352
(Mode-0) | | | | | | 2352,
2340, 2336, 2048 bytes
(Mode-1) | | | | | | 2352,
2340, 2336, 2048 bytes
(Mode-2) | |
| Diameter |
120 mm, 80 mm (with adapter at vertical mounting mode) | | Loading
Mechanism | Tray type |
| | Interface |
EIDE (ATAPI) |
| | Access Times
(typical) | Random |
DVD-ROM < 120 ms, CD-ROM < 110 ms | |
| Full-Stroke |
DVD-ROM < 240 ms, CD-ROM < 160 ms | |
Audio Output Level (typical) |
Line-out | CD
0.7 Vrms at 47 Kohms Load | | Data
Transfer Rate (sustained) | DVD-ROM |
Single Layer | 10.8 MB/sec.
Max. | | DVD-RAM | 2.77
MB/sec. Max | | |
CD-ROM | 7.2
MB/sec. Max. | | Cache
Buffer | 2 MB |
| | Spin-up Time (typical) |
less than 10 seconds |
| | MTBF |
120,000 Power On Hours (POH) |
| | Ambient Temperature |
Operating | -22°
to 140° F (-30° to 60° C) | | Relative
Humidity | Operating |
10% to 80% | | |
Storage/Transportation | 5%
to 95% | | Dimensions |
(HxWxD, maximum) |
0.5 x 5.04 x 5.1 in (12.7x128x129.4 mm) | | Option
Kit Contents | DVD-ROM
drive with installation guide, warranty card, registration card |
|
| Integrated Lights-Out
Standard (integrated on system board) |
Architecture |
32-bit PCI-based health and remote
management ASIC (Application Specific Integrated Circuit) |
| Processor |
32-bit RISC processor core running
at 66 MHz |
| Upgradability |
Option firmware upgradable via flash
ROM. |
| Video Support |
Utilizes the host server's embedded
video chip. Supports VGA/SVGA, 640 x 480 (256 to 16.7M colors), 800 x 600
(256 to 16.7M colors), 1024 x 768 (256 to 65K colors), 1280 x 1024 (256
colors) |
| Interfaces |
One Ethernet network connection
(10/100 Mb/s) |
| Memory |
2-MB Flash ROM |
| 8-MB SDRAM |
| Operating System Support |
Microsoft Windows NT 4.0 Server |
| Windows NT 4.0 Enterprise Edition |
| Windows 2000 Server |
| Windows 2000 Advanced Server |
| Red Hat 7.x |
| SuSE 7.0 |
| Novell NetWare 5.x, 6.x |
| Client Browser Support |
Microsoft Internet Explorer 5.5
or later. |
| iLO Standard Features |
Virtual Text Remote Console |
| Virtual Power Button Control |
| Dedicated LAN Connectivity |
| Automatic IP Configuration via DHCP/DNS/WINS |
| Industry Standard 128-bit Secure
Sockets Layer (SSL) Security |
| IML and iLO Event Logging |
| Support for up to 12 user accounts
with customizable access privileges |
| iLO Advanced Features
(optional) |
Virtual Graphical Remote Console |
| Virtual Floppy Drive |
|
|
Integrated Smart Array 5i Plus Controller
|
Data Compatible with all Smart
Array Controllers |
Yes |
| Instant Upgrades to other Smart
Array Controllers |
Yes |
| Consistent Software Manageability
Tools |
Yes |
| PCI-X Bus |
64-bit, 100 MHz (integrated on
system board) |
| PCI-X Peak Data Transfer Rate |
800 MB/s |
| SCSI Protocols Supported |
Ultra3, Ultra2 |
| SCSI Peak Data Transfer Rate |
160 MB/s per channel |
| NOTE: For ProLiant
servers having TWO internal drive bays on separate SCSI ports: SCSI Peak
Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2. |
| Channels |
2 (only one connected) |
| NOTE: For ProLiant
servers having two internal drive bays on separate SCSI ports: SCSI Peak
Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2. |
| SCSI Ports (external/internal) |
0/1 |
| NOTE: For ProLiant
servers having two internal drive bays on separate SCSI ports: SCSI Peak
Data Transfer Rate is 320 MB/s total; 160 MB/s per channel and Channels
is 2. |
| Drives Supported (maximum) |
2 |
| NOTE: Maximum
is the total number of internal drives on each specific ProLiant server. |
| Cache |
64 MB Read and/or Write Cache |
| Battery-Backed Write Cache |
Yes, with installation of Battery-Backed
Write Cache Enabler, up to 64MB |
| RAID Support |
0, 1, 1+0, 5 |
| Logical Drives (maximum) |
Maximum = total number of drives |
| Online Configuration |
Yes |
| Online Capacity Expansion |
Yes |
| Logical Drive Capacity Extension |
Yes |
| Online Stripe Size Migration |
Yes |
| Online RAID Level Migration |
Yes |
| Online Spare Support |
Yes |
| Automatic Data Recovery |
Yes |
| Drive Roaming |
Yes |
| Redundant Controllers |
No |
|
|
HP NC7170 Dual Port PCI-X 1000T Gigabit Server Adapter
|
Network Interface |
Two 10/100/1000-T ports |
| Compatibility |
IEEE 802.3 10Base-T |
| IEEE 802.3ab 1000Base-T |
| IEEE 802.3u 100Base-TX |
| |
IEEE 802.3ad, IEEE 802.3p, and
IEEE 802.3Q |
| Data Transfer Method |
64-bit/133MHz PCI-X, compatible
with 64/100, 64/66, 64/33 and 32/33 |
| Network Transfer Rate |
10Base-T (Half-Duplex) |
10 Mb/s |
| 10Base-T (Full-Duplex) |
20 Mb/s |
| 100Base-TX (Half-Duplex) |
100 Mb/s |
| 100Base-TX (Full-Duplex) |
200 Mb/s |
| 1000Base-T (Half and Full-Duplex) |
2000 Mb/s |
| Connector |
Two RJ-45 |
| Cable Support |
10Base-T |
10Base-T |
| 10/100/1000Base-T |
10/100/1000Base-T |
|
|
NC7770 PCI-X Gigabit Server Adapter
|
Network Interface |
10/100/1000-T |
| Compatibility |
IEEE 802.3 10Base-T |
| IEEE 802.3ab 1000Base-T |
| IEEE 802.3u 100Base-TX |
| Data Transfer Method |
64-bit/133MHz PCI-X |
| Network Transfer Rate |
10Base-T (Half-Duplex) |
10 Mb/s |
| 10Base-T (Full-Duplex) |
20 Mb/s |
| 100Base-TX (Half-Duplex) |
100 Mb/s |
| 100Base-TX (Full-Duplex) |
200 Mb/s |
| 1000Base-T (Half and Full-Duplex) |
2000 Mb/s |
| Connector |
RJ-45 |
| Cable Support |
10Base-T |
Category 3,4 or 5 UTP up to 328
ft (100 m) |
| 10/100/1000Base-T |
Category 5 UTP (2 pair); up to
328 ft (100 m) |
|
|
