Integrated Lights Out 2 (iLO2) Standard Management:

• Virtual Text Remote Console (pre-OS only)
• Remote Serial Console
• Virtual Power Button Control
• Virtual Unit ID control
• Integrated Remote Console
• Dedicated & full function shared network connectivity
• Embedded system health
• Browser, command line and scripted access
• Automatic IP Configuration via DHCP/DNS/WINS
• Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
• OS independent hardware health status
• IML and iLO Event Logging
• Support for 12 user accounts with customizable access privilege

HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
NOTE: Upon the event of a failed processor in a multi-processing environment, the system will automatically reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SAS hard drives and memory)

Integrated ATI ES1000, 32 MB video standard

• 16 bit color: maximum resolution of 1600 x 1200
• 32 bit color: maximum resolution of 1280 x 1024

NOTE: Maximum resolution available via iLO 2 remote console is 1280 x 1024.

HP Insight Control Environment delivers foundation management, including remote monitoring, hardware resource deployment, health monitoring, software version control, performance monitoring, vulnerability scanning and patch management, and power management.
HP Insight Control Environment installs and licenses the following components by default using a wizard-based integrated installer:

• HP Systems Insight Manager
• HP iLO Advanced Pack
• HP Insight Power Manager
• HP Rapid Deployment Pack
• HP Performance Management Pack
• HP Vulnerability and Patch Management Pack
• HP Virtual Machine Management Pack

Additional ProLiant Essentials software and management tools included on the Insight Control Management kit can be installed manually:

• HP Server Migration Pack - Universal Edition
  NOTE: HP Server Migration Pack - Universal Edition is licensed separately from the Insight Control Environment Suite.
• HP Open Service Event Manager
• HP Service Essentials Remote Support Pack
  NOTE: Server Migration Pack - Universal Edition can be installed from the SMP Universal CD included in the Insight Control Management media kit.
  NOTE: For additional product and licensing information about HP Insight Control Environment, visit: https://www.hp.com/go/ice.

HP iLO Power Management Pack is energy-efficient management software that delivers centralized control, reliable security, and energy savings for your BladeSystem infrastructure. iPMP combines the total control of iLO 2 Advanced in the area of remote management with the energy monitoring and control of the Insight Power Manager to deliver a robust solution capable of full remote control and power management of ProLiant servers through a unified interface within HP Systems Insight Manager.

HP Insight Control management suites and most HP ProLiant Essentials include a one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: https://www.hp.com/services/insight.

Upgrading, replacing, or virtualizing your existing server? Effortlessly transition to new virtual or physical HP ProLiant servers or BladeSystem with automated, accurate and affordable migration of OS, application and data. SMP Universal automates the manual processes required for migrating servers between physical or virtual platforms, whether migrating to VMware or Microsoft virtual machines. SMP Universal allows all of the following migrations:

• physical to ProLiant
• physical to virtual
• virtual to virtual
• virtual to ProLiant

NOTE: For more information, visit: https://www.hp.com/go/migrate.

The Insight Management Agents should be installed on all HP servers to present system instrumentation, health and configuration information into HP Systems Insight Manager and the HP System Management Homepage. The HP System Management Homepage aggregates systems data from Insight Management Agents and other HP management tools, providing a consolidated browser-based interface for managing individual servers.

Insight Management Agents and The HP System Management Homepage are included on ProLiant Support Packs, and can also be installed using the server profiles provided with the ProLiant Essentials Rapid Deployment Pack.

For additional information about the Management Agents and the HP System Management Homepage please visit the management Web site at: https://www.hp.com/servers/manage.

HP Serviceguard for Linux is a high availability clustering solution designed to protect applications and services from a wide variety of software and hardware failures, monitoring the health of each server (node) and quickly responding to failures such as those that affect system processes, system memory, LAN media and adapters, and application processes.

The following is a quick summary of HP Serviceguard for Linux features and support. For the most recent list of Linux distributions & kernels, servers and storage supported with Serviceguard for Linux, see the Serviceguard for Linux Datasheet, available at: https://www.hp.com/go/sglx/info.

• Supported Linux Distributions:
  • Red Hat EL 4
  • Red Hat EL 5
  • SUSE SLES10
• Supported Server Platforms
  • HP Integrity BladeSystem to Superdome
  • HP ProLiant BladeSystem p-Class & c-Class
  • HP ProLiant DL
  • HP ProLiant ML
  • IBM System x
  • Dell PowerEdge
  • Sun x64
  • Fujitsu Siemens PRIMERGY
• Hypervisors
  • HP Integrity Virtual Machines
  • VMware ESX
• Application Integration Toolkits
  • HP Serivceguard for Linux Oracle Database Toolkit
  • HP Serviceguard Extension for SAP on Linux (SGeSAP/LX)
  • Free Application Integration Toolkits:
    • Apache
    • MySQL
    • NFS
    • PostgreSQL
    • Samba
    • Tomcat
    • Sendmail
• Disaster Tolerant Solutions
  • HP Serviceguard for Linux Extended Distance Cluster (XDC) extends cluster distances up to 100 km, utilizes software RAID mirroring for data replication and is storage array independent
  • HP StorageWorks XP/EVA Cluster Extension Software for Linux (CLX) works seamlessly with HP Serviceguard for Linux, HP StorageWorks Continuous Access, and HP Disk Arrays to automate failover and failback between sites
• Software updates are distributed by HP Services to customers with support contracts

NOTE: For additional information on HP Serviceguard for Linux, visit: https://www.hp.com/go/sglx or see the HP Serviceguard for Linux QuickSpecs.
NOTE: HP Serviceguard for Linux products for HP ProLiant and select 3rd party x86 class servers include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: https://www.hp.com/services/swsupport.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

• Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of holes evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
• Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).
  

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

The HP ProLiant DL385 quick deploy rail system provides tool-free support for racks with square or round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series), with an adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on either the left or right side for improved cable management.
NOTE: Cable management arm must be removed to access hot-plug power supplies when the cable management arm is mounted on the right.
* High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack (single) - PN:  327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack (6-pack) - PN: 327281-B22) are required to support the HP ProLiant DL385 G2 in 7000 series racks. The DL385 G2 Cable Management Arm is not supported on 7000 series racks.

DL385 G2 Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions (https://www.racksolutions.com/hp/)

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: https://www.hp.com/go/factory-express.

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server and purchased at the same time or afterward that are internal to the enclosure. This also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions, provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

• Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage only
• Deployment Service: Installation and Start up only

Enhanced Service - optimize service level to increase IT performance and availability.

• Support: 3-Year Support Plus 24 only

Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://www.hp.com/go/proliant/carepack

NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.

HP DL385 G2 Performance Models

HP DL385G2 2218 4G HPM
432195-001

HP DL385G2 2220 4G HPM
438816-001

HP DL385G2 2218 2G
407424-001
HP DL385G2 2216 2G
408838-001
HP DL385G2 2214 2G
407429-001
HP DL385G2 2220 2G 438815-001

HP DL385 G2 Entry Models

HP DL385G2 2210 1G
434940-001

The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind, offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only.

For a full listing of ProLiant Smart Buys available for all server families, visit ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf.

S-Buy DL385G2 2214 2GB
AH525A

S-Buy DL385G2 2218 4GB, 2P
470064-380

Optical Drives

Riser Cage Options

6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic

Following are memory options available from HP:

1 GB REG PC2-5300 2 x 512 MB Single Rank Kit

 408850-B21

2 GB REG PC2-5300 2 x 1 GB Single Rank Kit

 408851-B21

Removable Media

External Storage

Maximum Storage Capacity - (SAS with MSA50)

Internal

HP StorageWorks SAS Tape Automation, External
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096

- Click on the system of interest. Example: DL385 G2
- Follow the instructions of the next screens.

Smart Array P400 Controller

The ProLiant Smart Buy program offers a collection of promotional server and option products that are configured with SMB in mind, offered at discounted prices, and positioned for quick delivery. Smart Buy server offers are available for a limited time only.

For a full listing of ProLiant Smart Buys available for all server families, visit: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf.

S-Buy DL385G2 2214 2GB
AH525A

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.