• The HP ProLiant DL360 G5 is now available with the latest Intel processor refresh (Quad-Core X5470 3.33GHz, 120W & L5430 2.66GHz, 50W)

• Processors:
  • Up to 2 Quad-Core or Dual-Core Intel® Xeon® processor 5100 sequence
  • Up to 2 Quad-Core Intel® Xeon® processor 5400/5300 sequence
  • Up to 2 Dual-Core Intel® Xeon® processor 5200 sequence
  • Intel® 5000P chipset supporting up to a 1333MHz Front Side Bus (FSB)
• Memory:
• Up to 64 GB of memory, supported by 8 slots of PC2-5300 Fully Buffered DIMMs (DDR2-667); 4:1 interleaving; memory mirroring; online spare
• Storage Controller:
• Performance Models: HP Smart Array P400i/256MB BBWC Controller (RAID 0/1/1+0/5/6) (512MB BBWC optional)
• High Efficiency and Base Models: HP Smart Array P400i/256MB Controller (RAID 0/1/1+0/5) (512MB BBWC optional)
• Entry Models: HP Smart Array E200i/64MB Controller (RAID 0/1/1+0) (128MB BBWC optional)
• Internal Drive Support:
• Up to (6) small form factor (SFF) hot-plug drive bays
• Slimline media bay supporting DVD, CD or Floppy drive
• Network Controller:
• Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support for Accelerated iSCSI through an optional Licensing Kit
• Expansion Slots:
• Two PCI-Express expansion slots: (1) full-length, full-height slot; (1) low-profile slot (optional PCIx riser supported)
• USB 2.0 Ports:
• 4 Total: (1) front, (1) internal and (2) rear accessible ports
• Redundancy:
  • Multiple layers of fault tolerance through critical component redundancy (power supply and fan redundancy), mirrored memory, embedded RAID capability, and full-featured remote Lights-Out management
• Infrastructure Management:
  • Convenient slide-out Systems Insight Display for quick and easy front view server diagnostics, along with status LEDs, Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU)
  • HP ProLiant Onboard Administrator (powered by the HP Integrated Lights-Out 2 management processor) for simplified server setup, health monitoring and recovery, power and thermal control, and lights-out remote administration.
  • HP Insight Control a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control supports both Windows and Linux-based central management servers.
  • HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's changing business requirements.
• Form Factor:
  • 1U Rack form factor (1.75"), less than 28 inches (70.5 cm) deep
• Operating Systems and Virtualization Software Support for ProLiant Servers:
  • Supports Windows, RHEL, SLES, OEL, Solaris, VMware, NetWare & HP Citrix Essentials for XenServer
• Deployment/Serviceability:
  • Sliding rails for in rack servicing ship standard; optional 1U Cable Management Arm
  • Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
    NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support for Accelerated iSCSI through an optional Licensing Kit

Integrated ATI ES1000, 32MB video standard

• 16 bit color: maximum resolution of 1600 x 1200
• 32 bit color: maximum resolution of 1280 x 1024

NOTE: Maximum resolution available via iLO 2 remote console is 1280x1024.

Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifeccyle. This provides the customer with higher levels of operational efficiency and highly reliable systems: www.hp.com/go/foundation.

The foundation pack includes:

• HP SmartStart
• HP Management
• HP ProLiant Firmware Maintenance

SmartStart version supported (minimum): SmartStart 7.60.
https://www.hp.com/servers/smartstart

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

• Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
• Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option kit from Rack Solutions at: https://www.hp.com/go/rackandpower

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: https://www.hp.com/go/factory-express.

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server and purchased at the same time or afterward that are internal to the enclosure. This also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions, provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

• Support - 3-Year 4-Hour response 24x7 Same Business Day Coverage only
• Deployment Service - Installation and Start up only

Enhanced Service - optimize service level to increase IT performance and availability.

• Support - 3-Year Support Plus 24 only

Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://www.hp.com/go/proliant/carepack

Quad-Core:
12MB (2 x 6MB) Level 2 cache; Intel Xeon Processor 5400 Sequence
Dual-Core:
6MB (1 x 6MB) Level 2 cache; Intel Xeon Processor 5200 Sequence

Factory Integrated Model ships with:

Two embedded NC373i Multifunction Gigabit Server Adapters
Integrated Lights-Out 2 (iLO 2) embedded
1 full-length and 1 low-profile x8 PCI-Express slots
9 fans; N+1 fan redundancy
(1) 700W power supply, redundant optional
Rack (1U), (1.75 in/4.45 cm)

AF556A

AF419A

AF418A

8.3kVA Model - mPDU, 40A, High (WW)

 252663-B21

8.3kVA Model - mPDU, 40A, High (power cord attached) (NA/JPN)

252663-D73

9.2kVA Model - mPDU, 40A, High (power cord attached) (INTL)

252663-B32

8.3kVA Model - mPDU 40A, High (core only) (NA/JPN)

252663-D75

Following are memory options available from HP:

1 GB FBD PC2-5300 2 x 512 MB Single Rank Kit

2 GB FBD PC2-5300 2 x 1 GB Dual Rank Kit

2 GB FBD PC2-5300 2 x 1 GB Low Power Single Rank Kit

Standard

Optional

Following are memory options available from HP:

Mirrored memory FBDIMMs configuration requirements (in addition to general configuration requirements):

• Banks A and B must be fully populated.
• Bank A and bank B must contain FBDIMMs with identical part numbers. If installed, bank C and bank D must also contain FBDIMMs with identical part numbers.

When using mirrored memory mode, FBDIMMs must be populated as specified in the following table:

Removable Media

Slimline 1.44-MB Diskette Drive

Up to 1

Slimline 24x IDE CD-ROM Drive

External

External

HP StorageWorks SAS Tape Automation, External
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096

HP StorageWorks Fibre Tape Automation, External
MSL2024
MSL4048
MSL8096
MSL6000

- Click on the system of interest. Example: DL360 G5
- Follow the instructions of the next screens.

L _WAd

L _pAm

L _WAd

L _pAm

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.