|
DL QuickSpecs
|
DL20
|
|
DL60
|
|
DL80
|
|
DL120
|
|
DL140
|
|
DL145
|
|
DL160
|
|
DL160se
|
|
DL165
|
|
DL180
|
|
DL185
|
|
DL320
|
|
DL325
|
|
DL345
|
|
DL360
|
|
DL365
|
|
DL380
|
|
DL385
|
|
DL388
|
|
DL560
|
|
DL580
|
|
DL585
|
|
DL740
|
|
DL760
|
|
DL785
|
|
DL1000
|
|
|
ML QuickSpecs
|
ML30
|
|
ML110
|
|
ML115
|
|
ML150
|
|
ML310
|
|
ML330
|
|
ML350
|
|
ML370
|
|
ML530
|
|
ML570
|
|
ML750
|
|
|
BL QuickSpecs
|
BL10e
|
|
BL20p
|
|
BL25p
|
|
BL260c
|
|
BL280c
|
|
BL2x220c
|
|
BL30p
|
|
BL35p
|
|
BL40p
|
|
BL420c
|
|
BL45p
|
|
BL460c
|
|
BL465c
|
|
BL480c
|
|
BL495c
|
|
BL60p
|
|
BL620c
|
|
BL660c
|
|
BL680c
|
|
BL685c
|
|
BL860c
|
|
|
SL QuickSpecs
|
SL160z
|
|
SL165z
|
|
SL170s
|
|
SL170z
|
|
SL230s
|
|
SL250s
|
|
SL270s
|
|
SL2x170z
|
|
SL335s
|
|
SL390s
|
|
SL4540
|
|
SL4545
|
|
|
XL QuickSpecs
|
XL170r
|
|
XL190r
|
|
XL220a
|
|
XL230a
|
|
XL730f
|
|
XL740f
|
|
XL750f
|
|
|
CL QuickSpecs
|
CL1850
|
CL1850 G1
| |
CL380
|
CL380 G1
| |
|
|
|
|
|
|
|
Proliant DL360 G4 QuickSpecs |
US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant DL360 G4 Overview
HP
ProLiant DL360 Generation 4 (G4)
|
1. | Up to 8 GB PC2700 SDRAM Memory |
2. | Up to
two Xeon processors with 800MHz FSB |
3. | Redundant fans standard |
4. | Two U320
hot plug drive bays (SATA models also available) | |
5. | Sliding rails standard
for in rack servicing |
6. | Optional redundant
power supplies | 7. | 1
full length and 1 half length PCI-X slots (optional PCI Express) | |
|
At
A Glance - Combining concentrated 1U compute power,
integrated Lights-Out management, and essential fault tolerance, the HP ProLiant
DL360 is optimized for space constrained data center installations
- Up
to 2 Intel Xeon 3.0 GHz/1MB, 3.4 GHz/1MB and 3.6 GHz/1MB Processors with 800MHz
front side bus
- Intel E7520 chipset
- 64-bit Intel® Xeon™ processors with 32-bit & 64-bit
computing
- Up to 8 GB of PC2700
DDR 333 SDRAM; system can be configured for 2:1 interleaving
- Advanced
ECC memory standard; optional Online Spare Memory
- Two
64 bit/133 MHz PCI-X slots (one full length slot and one half length); optional
PCI-Express
- Fan redundancy,
standard
- 460-Watt hot plug
power supply with optional 1+1 redundancy
- HP
Power Regulator for ProLiant delivering server level, policy based power management
with industry leading energy efficiency and savings on system power and cooling
costs
- Integrated Lights-Out featuring new firmware
v 1.70 with support for Power Regulator for ProLiant and introducing support for
the draft DMTF System Management Architecture for Server Hardware Command Line
Protocol standard
- Integrated
Lights-Out (iLO) remote management embedded on every HP ProLiant DL360
- Support for new iLO Shared Network
Port enables access to the iLO management processor through one of the embedded
system NICs
- Embedded Smart
Array 6i RAID Controller with optional 128MB transportable BBWC
- Embedded
NC7782 Dual Port NIC
- Supports
up to two Ultra320 hot plug hard drives; Serial ATA models also available
- Three USB ports available: rear, front,
internal
- 1U Rack form factor
(1.75")
- New spring-loaded Universal
sliding rails for in rack servicing ship standard; optional ambidextrous cable
management arm
- ProLiant Essential
Foundation Pack standard, including HP Systems Insight Manager, SmartStart, SmartStart
Scripting Toolkit, Subscriber's Choice and ROM Based Setup Utility (RBSU)
- Protected by HP Services and a worldwide network of resellers
and service providers. Three-year Next Business Day, on-site limited global warranty.
Certain restrictions and exclusions apply. Pre-Failure Notification on processors,
memory, and SCSI hard drives. SATA hard drives have a one-year warranty.
|
Standard Features
Hard Drives | Serial-ATA
(SATA) Hard Drives
|
|
|
|
HP 500GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 250GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 160GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 80GB 1.5G SATA 7.2K 3.5"
HDD | |
NOTE: Please
see the SATA Hard Drive QuickSpecs for Technical Specifications such as capacity,
height, width, interface, transfer rate, seek time, physical configuration, and
operating temperature: Serial ATA Hard Drive QS: https://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html | |
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section. |
Processor
One of the following depending on Model
|
Intel Xeon Processor 3.0 GHz/800MHz
-1MB L2 |
Intel Xeon Processor 3.4 GHz/800MHz
-1MB L2 |
Intel Xeon Processor 3.6 GHz/800MHz
-1MB L2 |
|
Cache
Memory |
1MB Level 2 cache |
|
Upgradeability | Upgradeable
to dual processing |
|
Chipset |
Intel chipset is E7520 |
|
Memory |
Type |
PC2700 DDR 333 SDRAM |
|
Standard |
1 GB (1 x 1024 MB) |
|
Maximum |
8 GB |
|
Memory Protection |
Online spare |
Advanced ECC |
|
Network Controller |
Embedded NC7782 Dual Port NIC
|
|
Expansion
Slots | Slot Number | Bus
Speed | Bus Number* | Device
Number** | Hot Plug | PCI
Voltage | Notes |
1 | 64bit/133MHz
PCI-X | 7 |
0 |
no |
3.3 Volt | |
1 | PCI
Express x8(optional) | 3 |
0 |
no |
n/a | |
2 | 64bit/133MHz
PCI-X | 10 |
0 |
no |
3.3 Volt | |
2 | PCI
Express x8(optional) | 13 |
0 |
no |
n/a | |
*NOTE:
Default bus assignment. Inserting cards with PCI bridges may alter the actual
bus assignment number. **NOTE: Slots are enumerated differently based
on OS. MS OS's enumerate from lowest to highest Device ID by bus (starting with
the lowest bus). NOTE: For more information regarding PCI-X, please
see the following URL: https://www.hp.com/servers/pci-x.
NOTE: All slots can accept universal keyed PCI cards. |
|
Manageability |
Integrated Lights-Out (iLO) Management (integrated on motherboard)
|
|
Storage Controllers |
SCSI Models |
Smart Array 6i Controller (integrated
on system board of SCSI models)
NOTE: The HP ProLiant DL360 G4 does
not offer an external SCSI port. |
SATA Models |
HP embedded 2 Port SATA Controller
(integrated on system board of SATA models)
NOTE: The HP ProLiant DL360 G4 does
not offer an external SCSI port. |
|
Storage |
Diskette Drive |
1.44 MB Diskette Drive; optional
in some models |
|
Optical Drive |
24x IDE CD-ROM Drive (Low-Profile)
(ejectable); optional in some models |
|
Maximum
Internal Storage Type | Hot Plug
SCSI | 600GB | 2
x 300GB Ultra320 | SATA
| 1TB | 2
x 500GB Serial ATA |
|
Graphics |
Integrated ATI RAGE XL Video
Controller with 8-MB SDRAM Video Memory |
|
Form Factor |
Rack (1U), (1.75 in/4.45 cm) |
|
ProLiant
Essentials Foundation Pack Software |
HP Systems Insight Manager | HP's
new HP Systems Insight Manager (HP SIM) helps maximize system uptime and performance
and reduce system maintenance costs by providing proactive notification of problems
before those problems result in unplanned downtime or reduced productivity. HP
SIM are both easy to set up work with the Insight Management Agents, integrated
Light-Out and Remote Insight Lights-Out Edition, and Version Control Agents to
deliver robust fault, configuration, and asset management as well as remote administration.
With HP SIM customers will also be able to take advantage of role-based security;
the ability to manage ProLiant, Integrity, and HP 9000 systems; and plug-ins for
storage, client, printer, and power management as well as server rapid deployment,
performance management, and workload management. For more details on HP SIM visit
https://www.hp.com/go/hpsim. |
SmartStart | SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at https://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart 7.10. | Management
Agents | The Management Agents
form the foundation for HP's Intelligent Manageability strategy. They provide
direct, browser-based access to in-depth instrumentation built into HP servers,
workstations, desktops, and portables, and send alerts to HP System Insight Manager
and other enterprise management applications in case of subsystem or environmental
failures. For additional information about the Management Agents and other management
products from HP, please visit the management Web site at https://www.hp.com/servers/manage. |
Subscriber's Choice | Subscriber's
Choice Driver and Support Alerts/Notifications is a web-based email subscription
service that provides automatic delivery of software and driver change notifications
for ProLiant products. Sign up at https://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis. | ROMPaq,
support software, and configuration utilities | The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options available in SmartStart or downloadable from Software and Drivers
download pages: https://www.hp.com/go/support |
Insight Diagnostics Online
Edition | The most advanced configuration
analysis, reporting and troubleshooting utilities used by HP and at your fingertips,
available in SmartStart. | Optional
ProLiant Essentials Value Packs |
Optional software offerings that selectively extend the functionality of an
Adaptive Infrastructure to address specific business problems and needs:
- Rapid Deployment Pack - an automated solution for multi-server deployment
and provisioning, enabling companies to quickly and easily adapt to changing business
demands.
- Workload Management Pack - provides easier management of complex
environments, improving overall server utilization and enabling Windows® 2000
customers for the first time to confidently deploy multiple applications on a
single multiprocessor ProLiant Server.
- Integrated Lights-Out Advanced
Pack - upgrades the Integrated Lights-Out processor to full virtual presence and
control with graphical console and virtual media.
- Performance Management
Pack - a performance management solution that identifies and explains hardware
performance bottlenecks on ProLiant servers and attached options enabling users
to better utilize their valuable resources.
- Intelligent Networking
Pack - detects and analyzes network bottlenecks or broken network linkages and
steers traffic to the optimum route based on network conditions, plus it provides
an extra layer of protection. The virus throttle feature of the solution slows
the propagation of fast spreading virus
- Vulnerability and Patch
Management Pack - identifies and remediates software security vulnerabilities
due to missing patches as well operating system configurations that can be exploited
by viruses, worms, and other blended threats
- Virtual Machine Management
Pack - provides central management and control of virtual machines from Microsoft
and VMware. Integrated approach provides the ability to manage both physical and
virtual resources from a single management console.
- Server Migration
Pack - The Server Migration Pack automates the manual processes required for migrating
servers between physical or virtual platforms (P2V, V2P, and V2V).
|
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value Packs.
Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessential.
| |
|
Industry Standard
Compliance |
ACPI 1.0b Compliant |
PCI 2.2 Compliant |
|
Microsoft® Logo certifications |
|
USB 1.1 and 2.0 Compliant |
|
Remote Manageability |
Integrated Lights-Out (iLO) Standard Management:
- Virtual Text Remote Console
- Virtual Power Button Control
- Dedicated & shared LAN Connectivity
- Browser and command line access
- Automatic IP Configuration via DHCP/DNS/WINS
- Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell
Security
- IML and iLO Event Logging
- Support for 12 user accounts with customizable access privilege
Integrated Lights Out Advanced Pack (optional)
Remote Lights out Edition ll (optional)
|
|
Intelligent Manageability
|
HP Systems Insight Manager
SmartStart
Remote Insight Lights-Out Edition ll (optional)
ROM-Based Setup Utility (RBSU)
Remote-Flash Redundant ROM
Integrated Management Log (IML)
Server Health logging
Automatic Server Recovery-2 (ASR-2)
System Interconnect Status Indicators
Dynamic sector repairing and drive parameter tracking (with Smart Array
controllers)
Hot Spare Boot
(NOTE: Upon the event of a failed
processor or VRM in a multi-processing environment, the system will automatically
reboot and use the remaining good processor(s).)
Power Down Utility
Pre-Failure Warranty (covers processors, as well as SCSI hard drives and
memory) |
|
Security |
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Removable CD and Floppy Drive Assembly
Serial interface control
Administrator's password
Disk configuration lock
Integrated Lights-Out has 12 customizable user accounts and SSL encryption
Integrated Lights-Out can be disabled via a Global Setting |
|
Server Power Cords |
High line cord ships standard
with all part numbers, an additional low line cord |
|
Power Supply |
SCSI & SATA Models: |
460W Optional (1+ 1 redundant)
power supply
NOTE: PN 354587-B21 contains the
optional power supply and an IEC power cable only; purchase if connecting
to PDU/UPS that supports IEC cables. PN 354587-001 contains a low line (NEMA)
power cord only. |
|
System Fans |
7 fans ship standard; Fan redundancy
standard |
|
Rack
Airflow Requirements |
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack
is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
- Front and rear doors:
If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from
top to bottom to permit adequate airflow (equivalent to the required
64 percent open area for ventilation).
- Side: The clearance between the installed
rack component and the side panels of the rack must be a minimum of
2.75 inches (7 cm).
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
|
|
NOTE: For additional information, refer to the Setup and Installation Guide
or the Documentation CD provided with the server, or to the server documentation
located in the Support section at the following URL: https://h18000.www1.hp.com/products/servers/proliantdl360/index.html. |
|
Factory Express Portfolio for
Servers and Storage |
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to https://www.hp.com/go/factory-express.
|
|
Service and Support |
Three-year limited warranty, including hardware diagnostic support, pre-failure
warranty (coverage of hard drives, memory and processors). The warranty
is fully supported by HP Services and a worldwide network of resellers
and service providers. In addition 90-day's getting started software telephone
support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP Care Pack
services.
NOTE: Limited warranty includes
3 year parts, 3 year labor, 3-year on-site support.
NOTE: SATA drives have a 1 year
warranty.
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
- Installation and start up
- Education courses
- Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
- Comprehensive range of software technical support for Microsoft, Linux,
ProLiant Essentials and VMWare-based IT solutions helping to deliver
high level of application availability. Response times range from 30
mins for critical problems to 2 hours.
- System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server, purchased at the same time or afterward, internal
to the enclosure, as well as 22" and smaller external monitors and
tower UPS options up to 3kVA; these items will be covered at the same
service level and for the same coverage period as the server. Coverage
of UPS Battery is not included, standard warranty terms & conditions
apply. For servers or storage systems installed within a rack, service
also covers all HP qualified rack options installed within the same rack.
|
|
NOTE: For more
information on HP Care Pack services, contact any of our sales offices or
resellers or visit our Web site on the internet at: https://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers
and resellers, please visit us at: https://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty
and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html |
Models
DL360R04 X3.4-1MB/800, 2GB SCSI, RPS 354572-001 | Processor | (1)
Intel Xeon Processor 3.4 GHz/800MHz standard (up to 2 supported) |
Cache Memory | 1MB
level 2 cache | Memory | 2
x 1 GB (Standard) to 8 GB (Maximum) of PC2700 DDR 333 SDRAM | Network
Controller | Embedded NC7782 Dual
Port NIC | Storage
Controller | U320 Smart Array
6i Controller (embedded on system board) NOTE:
The HP ProLiant DL360 Generation 4 (G4) does not offer an external SCSI port. |
Hard Drives | None
ship standard; system supports up to two hot plug U320 drives NOTE:
The HP ProLiant DL360 G4 SCSI models only support U320 Universal Hot Plug
drives. | Remote
Management | Integrated Lights-Out
(iLO) Standard Management (embedded) | Power
Supply | Two 460W power supply
(1+ 1 redundant) | Optical
Drive | 24x IDE CD-ROM Drive (Low-profile) |
Diskette Drive | 1.44
MB Diskette Drive | PCI-X
Slots | 1 full length and 1 half
length 64bit/133MHz PCI-X slot | Form
Factor | Rack (1U), (1.75 in/4.45
cm) | |
DL360R04 X3.4-1MB/800, 1GB SCSI 354571-001
| Processor |
(1) Intel Xeon Processor 3.4 GHz/800MHz standard (up to 2 supported) |
Cache Memory | 1MB
level 2 cache | Memory | 1
x 1 GB (Standard) to 8 GB (Maximum) of PC2700 DDR 333 SDRAM | Network
Controller | Embedded NC7782 Dual
Port NIC | Storage
Controller | U320 Smart Array
6i Controller (embedded on system board) NOTE:
The HP ProLiant DL360 Generation 4 (G4) does not offer an external SCSI port. |
Hard Drives | None
ship standard; system supports up to two hot plug U320 drives NOTE:
The HP ProLiant DL360 G4 SCSI models only support U320 Universal Hot Plug
drives. | Remote
Management | Integrated Lights-Out
(iLO) Standard Management (embedded) | Power
Supply | One 460W power supply
(redundant power supply optional) | Optical
Drive | 24x IDE CD-ROM Drive (Low-profile) |
Diskette Drive | 1.44
MB Diskette Drive | PCI-X
Slots | 1 full length and 1 half
length 64bit/133MHz PCI-X slot | Form
Factor | Rack (1U), (1.75 in/4.45
cm) | |
DL360R04 X3.4-1MB/800, 1GB 2P SATA
354570-001
|
Processor |
(2) Intel Xeon Processor 3.4
GHz/800MHz standard |
Cache Memory |
1MB level 2 cache |
Memory |
1 x 1 GB (Standard) to 8 GB
(Maximum) of PC2700 333 DDR SDRAM |
Network Controller |
Embedded NC7782 Dual Port NIC |
Storage Controller |
Embedded SATA controller; Non-RAID
for controller |
Hard Drives |
None ship standard; system supports
up to two Serial ATA drives
NOTE: When SATA drives are installed,
hot-plug capability and LEDs are not currently supported. |
Remote Management |
Integrated Lights-Out (iLO)
Standard Management (embedded) |
Power Supply |
One 460W power supply (redundant
power supply optional) |
Optical Drive |
Optional on SATA Models |
Diskette Drive |
Optional on SATA Models |
PCI-X Slots |
1 full length and 1 half length
64bit/133 MHz PCI-X slot |
Form Factor |
Rack (1U), (1.75 in/4.45 cm) |
|
Configuration Information - Factory Integrated Models
NOTE:
HP does not allow factory integration of options into standard models
listed below.
Configure-to-order servers must start with a CTO Chassis.
NOTE:
This product offering does not support HP Factory Express Server Configuration
Level 1. |
Step
1: Base Configuration (choose one of the following configurable models) |
Models |
HP ProLiant DL360G4
SATA Rack CTO Chassis
|
367006-405 |
Factory Integrated Model ships with:
|
|
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
Non-RAID SATA (SATA RAID functionality is available via OS software RAID)
1 full length and 1 half length 64bit/133 MHz PCI-X slot
Integrated Lights-Out (iLO) embedded
7 fans; Fan redundancy
Rack (1U), (1.75 in/4.45 cm)
|
|
HP ProLiant DL360G4
SCSI Rack CTO Chassis |
367007-405
|
Factory Integrated Model ships with:
|
|
NC7782 Dual Port PCI-X Gigabit Server Adapter (embedded)
U320 Smart Array 6i Controller (embedded on system board)
1 full length and 1 half length 64bit/133 MHz PCI-X slot
Integrated Lights-Out (iLO) embedded
1.44MB Diskette Drive
7 fans; Fan redundancy
Rack (1U), (1.75 in/4.45 cm)
|
|
|
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted) |
Processors |
Intel X3.0GHz/800-1MB
DL360G4 FIO BASE
|
368152-B21
|
Intel X3.4GHz/800-1MB
DL360G4 FIO BASE
|
354582-B21
|
Intel X3.6GHz/800-1MB
DL360G4 FIO BASE |
354583-B21 |
Base
Memory |
512 MB of Advanced
ECC PC2700 DDR SDRAM DIMM Memory Kit (1 x 512 MB) |
|
1024 MB of Advanced
ECC PC2700 DDR SDRAM DIMM Memory Kit (1 x 1 GB)
|
|
2048 MB of Advanced
ECC PC2700 DDR SDRAM DIMM Memory Kit (1 x 2 GB) |
|
Optical
Drive |
NOTE:
An Optical Drive is REQUIRED if choosing the 367007-405 SCSI Rack CTO Chassis
Model in Step 1.
NOTE: Optical Drives are OPTIONAL if choosing the 367006-405 SATA
Rack CTO Chassis Model in Step 1.
|
|
Slimline CD-ROM
Drive 24X
NOTE: This CD/ROM Drive (PN 356963-B21)
is for SATA models.
|
|
Slimline CD-RW/DVD-ROM
Combo Option Kit |
|
Slimline DVD-ROM
Drive (8X/24X) Option Kit
NOTE: This DVD-ROM Drive (PN 264007-B21)
is for SCSI models. It is not supported in SATA models.
|
|
|
Step
3: Choose Additional Factory Integratable Options |
Diskette Drive |
1.44 MB Diskette
drive
NOTE: This Diskette Drive is for
SATA (367006-405) models
|
354588-B21 |
Optical
Drive |
NOTE:
The Optical Drive is OPTIONAL for the SATA Rack CTO Chassis Model (367006-405)
but REQUIRED if choosing the SCSI Rack CTO Chassis Model (367007-405) in
Step 1.
|
|
Slimline CD-ROM
Drive 24X
NOTE: This CD/ROM Drive (PN 356963-B21)
is for SATA models.
|
|
Slimline DVD-ROM
Drive (8X/24X) Option Kit
NOTE: This DVD-ROM Drive (PN 264007-B21)
is for SCSI models. It is not supported in SATA models.
|
|
460W HP redundant
power supply with IEC cord only |
|
|
Step
4: Choose Additional Options for Factory Integration |
NOTE:
For additional options, please refer to the "Options" section
below. |
Options
NOTE:
Some options may not be factory integratable. Please contact your local
sales representative for additional information. |
HP
ProLiant DL360
G4 Unique Options |
Intel Xeon 3.0 GHz/800MHz-1MB
Processor Option Kit
NOTE: This processor option kit (PN
368152-B21) supports the HP ProLiant DL360 G4 only.
|
368152-B21 |
Intel Xeon 3.4 GHz/800MHz-1MB
Processor Option Kit
NOTE: This processor option kit (PN
354582-B21) supports the HP ProLiant DL360 G4 only.
|
354582-B21 |
Intel Xeon 3.6 GHz/800MHz-1MB
Processor Option Kit
NOTE: This processor option kit (PN
354583-B21) supports the HP ProLiant DL360 G4 only.
|
354583-B21 |
1.44 MB Diskette
Drive
NOTE: This Diskette drive is for
SATA models only.
|
354588-B21 |
PCI-e Riser option
(to convert one or both PCI-X to PCI-e slots)
|
354589-B21
|
Ambidextrous cable
management arm
NOTE: Package contains two cable
management arms
|
365403-B21
|
Fixed Cord Extension
Bars for 1U servers (2 PDU sticks per kit)
|
351655-B21
|
460W HP redundant
power supply with IEC cord only |
|
460W HP redundant
power supply with NEMA cord only
NOTE: The HP ProLiant DL360 G4 ships
with an IEC-IEC power cord used for rack mounting with Power Distribution
Units (PDUs). For stand-alone deployments or installation without a rack.
Models ship with two power cords: IEC-IEC and NEMA cords.
|
|
|
ProLiant
Essentials Value Pack Software | ProLiant
Essentials Integrated Lights-Out Advanced Pack |
| ProLiant
Essentials Integrated Lights-Out Advanced Pack, 1 server Featuring:
sophisticated virtual administration features for ultimate control of servers
in the data centers and remote sites. |
| NOTE:
For additional ProLiant Integrated Light-Out Advanced Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11052_na/11052_na.html
| |
ProLiant Essentials
Intelligent Networking Pack |
| ProLiant
Essentials Intelligent Networking Pack - Windows Edition, Single Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation. |
| NOTE:
For additional ProLiant Intelligent Networking Pack - Windows License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12062_na/12062_na.html
| |
ProLiant Essentials
Intelligent Networking Pack - Linux Edition, Single Server License |
397004-B21 | NOTE:
For additional ProLiant Intelligent Networking Pack - Linux License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12327_na/12327_na.html
| | ProLiant
Essentials Performance Management Pack |
| ProLiant
Essentials Performance Management Pack, Single-Server License NOTE:
For use with a single server. Contains one license with a unique license activation
key, HP Management CD and documentation. NOTE: The most recent version
of the software can always be downloaded at https://www.hp.com/products/pmp. |
| NOTE:
For additional ProLiant Performance Management Pack License Kits please see the
QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11925_na/11925_na.html
| |
ProLiant Essentials
Rapid Deployment Pack Windows Edition and Linux Edition Release |
| Rapid
Deployment Pack, Single-Server License NOTE:
This license allows 1 server to be deployed and managed via RDP. |
| NOTE:
For additional ProLiant Essentials Rapid Deployment Pack License Kits please see
the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html
https://h18000.www1.hp.com/products/quickspecs/11713_na/11713_na.html |
| ProLiant
Essentials Workload Management Pack |
| ProLiant
Essentials Workload Management Pack, Single Server License |
| NOTE:
For additional ProLiant Workload Management Pack License Kits please see the QuickSpecs
at: https://h18000.www1.hp.com/products/quickspecs/11452_na/11452_na.html
| | ProLiant
Essentials Virtualization Management Software | |
ProLiant Essentials
Virtual Machine Management Pack, Single-Server License NOTE:
For use with a single server. Contains one license with a unique license activation
key and documentation. |
372214-B21 | ProLiant
Essentials Server Migration Pack, Single-Migration License NOTE:
Contains one license, enabling 1 server migration, with a unique license activation
key and documentation. NOTE: This license allows 1 server to be migrated
from a physical server to a virtual machine. Or this license can be used to migrate
a virtual machine from one virtualization layer i.e. VMware GSX to a different
virtualization layer such as VMware ESX or Microsoft Virtual Server 2005.
| 375345-B21 |
NOTE:
For additional ProLiant Essentials Virtualization Management Software License
Kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12328_na/12328_na.html
| | ProLiant
Essentials Vulnerability and Patch Management Pack | |
ProLiant Essentials
Vulnerability and Patch Management Pack, Single-Server License NOTE:
For use with a single server. Contains one license with a unique license activation
key and documentation. |
371645-B21 | NOTE:
For additional ProLiant Vulnerability and Patch Management Pack License Kits,
please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12111_na/12111_na.html
| |
NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please
see the following URL: https://www.hp.com/servers/proliantessentials. |
|
|
ProLiant Software
Maintenance Subscription |
ProLiant Software Maintenance
Subscription
|
355060-B21
|
ProLiant Software Maintenance
Single Release
|
356573-B21
|
ProLiant Foundation Pack Single
Release
|
356604-B21
|
NOTE: Please see
the SmartStart QuickSpecs for additional information regarding the subscription
purchase:
https://h18000.www1.hp.com/products/quickspecs/north_america/11073.html |
|
|
Processor |
Intel Xeon 3.0 GHz/800MHz-1MB
Processor Option Kit
NOTE: This processor option kit (PN
368152-B21) supports the HP ProLiant DL360 G4 only.
|
368152-B21
|
Intel Xeon 3.4 GHz/800MHz-1MB
Processor Option Kit
NOTE: This processor option kit (PN
354582-B21) supports the HP ProLiant DL360 G4 only.
|
354582-B21
|
Intel Xeon 3.6 GHz/800MHz-1MB
Processor Option Kit
NOTE: This processor option kit (PN
354583-B21) supports the HP ProLiant DL360 G4 only.
|
354583-B21
|
|
Memory
(DIMMs)
|
512 MB of Advanced ECC PC2700
DDR SDRAM DIMM Memory Kit (1 x 512 MB)
|
|
1024 MB of Advanced ECC PC2700
DDR SDRAM DIMM Memory Kit (1 x 1 GB)
|
|
2048 MB of Advanced ECC PC2700
DDR SDRAM DIMM Memory Kit (1 x 2 GB) |
|
|
Optical Drives |
Slimline CD-RW/DVD-ROM Combo
Option Kit |
|
Slimline DVD-ROM Drive (8X/24X)
Option Kit (Servers)
NOTE: This DVD-ROM Drive (PN 264007-B21)
is for SCSI models. It is not supported in SATA models.
|
|
Slimline CD-ROM Drive 24X
NOTE: This CD/ROM Drive (PN 356963-B21)
is for SATA models.
|
|
HP DVD+R/RW 8X Slim |
|
|
Diskette Drive |
1.44 MB Diskette Drive
NOTE: This 1.44MB Diskette Drive
(PN 354588-B21) is for SATA models.
|
354588-B21
|
|
Hard Drives | Serial-ATA
(SATA) Hard Drives
| |
Serial-ATA
(SATA) Hard Drive (SATA Models only) NOTE: When SATA
drives are installed, hot-plug capability and LEDs are currently not supported.
NOTE: SATA drives have a 1 year warranty. | |
HP 500GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 250GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 160GB 1.5G SATA 7.2K 3.5"
HDD | |
HP 80GB 1.5G SATA 7.2K 3.5"
HDD | |
NOTE: Please
see the SATA Hard Drive QuickSpecs for Technical Specifications such as capacity,
height, width, interface, transfer rate, seek time, physical configuration, and
operating temperature: Serial ATA Hard Drive QS: https://h18000.www1.hp.com/products/quickspecs/11940_na/11940_na.html | |
|
Storage
Controllers | SCSI Controllers
| |
128MB Battery Backed Write Cache
Enabler Option Kit NOTE: Upgrade for
Smart Array 6i Controller. |
|
Smart Array 6402/128 Controller NOTE:
For support of external drives only. |
273915-B21
|
Smart Array 6404/256 Controller NOTE:
For support of external drives only. |
273914-B21
|
Smart Array 642 Controller NOTE: For
support of external drives only. |
291967-B21
| 128MB
Battery-Backed Cache Enabler NOTE:
This 128MB BBWC supports the Smart Array 641 Controller and Smart Array 642 Controller.
| |
64-Bit/66-MHz Dual Channel Wide
Ultra3 SCSI Adapter, Alternate OS |
| 64-Bit/133-MHz
Dual Channel Ultra320 SCSI Adapter NOTE:
For support of external drives only. |
| Ultra320
Expansion Module for SA-6402 NOTE: For
support of external drives only. |
| 64-Bit/133-MHz
Single Channel Ultra320 SCSI HBA G2 |
| NOTE:
Please see the following Controller or SCSI Adapter QuickSpecs for Technical
Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported,
SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID
support, and additional information: https://h18000.www.1.hp.com/products/quickspecs/12030_na/12030_na.html
(Smart Array 6i) https://h18000.www1.hp.com/products/quickspecs/11587_na/11587_na.html
(Smart Array 6400 Series) https://h18000.www1.hp.com/products/quickspecs/11563_na/11563_na.html
(Smart Array 642) https://h18000.www1.hp.com/products/quickspecs/10429_na/10429_na.html
(SCSI Adapter) https://h18000.www1.hp.com/products/quickspecs/11555_na/11555_na.html
(U320 Adapter) https://h18000.www.1.hp.com/products/quickspecs/11943_na/11943_na.html
(U320 SCSI HBA) | |
SAS Controller | |
HP Smart Array P600 Controller |
| 512MB
DDR BBWC Upgrade | |
NOTE: Please
see the following Controller QuickSpecs for Technical Specifications such as PCI
Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer
Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional
information: https://h18000.www1.hp.com/products/quickspecs/12247_na/12247_na.html
(Smart P600 Controller) | |
SAS HBA | |
HP 8 Internal Port SAS HBA with
RAID | |
NOTE: Please
see the following QuickSpec for additional information: https://h18000.www.1.hp.com/products/quickspecs/12332_na/12332_na.html
(SAS HBA) | |
|
Communications |
HP NC150T PCI 4-port Gigabit 1000T
Combo Switch Adapter |
|
HP NC310F PCI-X 1000SX Gigabit
Server Adapter |
|
HP NC320T PCI Express 1000T Gigabit
Server Adapter |
|
HP NC370F PCI-X Multifunction
1000SX Gigabit Server Adapter |
374193-B22
|
HP NC370T PCI-X Multifunction
1000T Gigabit Server Adapter |
|
HP NC1020 PCI 1000T Gigabit Server
Adapter |
|
HP NC7170 PCI-X Dual Port 1000T
Gigabit Server Adapter |
|
HP NC7771
PCI-X 1000T Gigabit Server Adapter
|
|
NOTE:
A minimum of 1 GB of memory is required for NC370x adapters, with a maximum
of two NC370x adapters permitted in a server.
NOTE: Any NIC (except the NC1020) on the option list can be used
for redundancy with the embedded NC7782 Dual Port Network Controller. When
teaming with other NICs or with the embedded NIC, the lack of Jumbo Frames
and LSO features on the NC1020 will cause high end NICs to have those features
disabled. (e.g. incompatibility issues with the other option NICs for that
platform).
|
|
HP NC570C
PCI-X Dual-port 4x Fabric Adapter
|
376158-B21
|
HP NC571C PCI
Express Dual-port 4x Fabric Adapter
|
|
HP 24-Port 4x Fabric Copper Switch |
|
HP 1m 4x
Fabric Copper Cable
|
376232-B21
|
HP 3m 4x
Fabric Copper Cable
|
376232-B22
|
HP 5m 4x Fabric Copper Cable |
376232-B23
|
|
Management Options |
Remote Insight Lights-Out Edition
II |
227251-001
|
|
High Performance
Solutions |
HPCC Myrinet Fiber NIC
|
257894-006
|
Myrinet 2XP PCI-X, Fiber, F-series,
2MB |
390456-B21
|
|
Tape Drives |
NOTE: For the
complete listing of Tape Drive offerings, please see: https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For recommended tape drive offerings for this ProLiant server see the
following: | | USB
Tape Drives | |
HP StorageWorks DAT 40 USB External
Tape Drive (Carbonite) | DW023A |
HP StorageWorks DAT 72 USB External
Tape Drive (Carbonite) | |
Ultrium Tape Drives - External,
Rack-Mount and Array | |
HP StorageWorks Ultrium 232 External
Tape Drive (Carbonite) | |
HP StorageWorks Ultrium 232 Internal
Tape Drive (Carbonite) NOTE: No internal
tape drives fit inside the HP ProLiant DL360 G4p. The internal drive shown here
is for the 1U or 3U Rack-mount Kit. |
| HP
StorageWorks Ultrium 448 External Tape Drive (Carbonite) |
DW017B | NOTE:
Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional
options such as controllers, media, and other related items: https://h18006.www1.hp.com/products/quickspecs/11739_na/11739_na.html
https://h18006.www1.hp.com/products/quickspecs/12128_na/12128_na.html | |
For
an up-to-date listing of the latest O/S and software support details for HP Ultrium
tape drives, please visit: https://www.hp.com/go/connect | |
DAT Drives - External, Rack-Mount
and Array Module | |
HP StorageWorks DAT 72 SCSI External
Tape Drive (Carbon) | Q1523B |
HP StorageWorks 1U Rack-mount
kit with one DAT 72 (Carbon) |
A7443A | NOTE:
Please see the DAT Tape Drive QuickSpecs for controllers, media, and other
options: https://h18000.www1.hp.com/products/quickspecs/11883_na/11883_na.html
For an up-to-date listing of the latest O/S and software support details for HP
DAT drives, please visit: https://www.hp.com/go/connect | |
Rack-Mount Tape Drive Enclosures | |
HP StorageWorks 1U Rack-Mount
Kit NOTE: The 1U Rack-mount Kit can
support up to (2) half-height tape drives and compatible with multiple Single-Ended
and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160,
Ultrium 215, Ultrium 232 and Ultrium 448 tape drives. |
| HP
StorageWorks 1U USB Rack-Mount Kit |
| 1U
USB Cable Option Kit NOTE: Converts a 1U SCSI rack-mount kit
to a USB interface to support the USB tape drives. |
| HP
StorageWorks 3U Rack-Mount Kit NOTE: The 3U Rack-mount Kit can
support up to (2) full-height or (4) half-height tape drives and compatible with
multiple Single-Ended and LVD SCSI tape drives including DAT 24, DAT 40, DAT 72,
DLT VS80, DLT VS160, SDLT 320, SDLT 600, Ultrium 215, Ultrium 230, Ultrium 232,
Ultrium 460, Ultrium 448 and Ultrium 960 tape drives. |
274338-B22 | NOTE:
Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information
regarding these kits: https://h18000.www1.hp.com/products/quickspecs/10854_na/10854_na.html | |
|
|
Tape
Autoloaders | DAT Autoloader | |
HP StorageWorks DAT 72x6 Autoloader
(External) | Q1567A |
NOTE:
Please see the DAT 72x6 Tape Autoloader QuickSpecs for additional options such
as host bus adapters, controllers and media: https://h18006.www1.hp.com/products/quickspecs/11905_na/11905_na.html | |
HP StorageWorks 1/8 Tape Autoloader | |
HP StorageWorks 1/8 Ultrium 960
Tape Autoloader | AF204A |
HP StorageWorks 1/8 Ultrium 448
Tape Autoloader | AF203A |
HP StorageWorks 1/8 Ultrium 232
Tape Autoloader | AF202A |
1/8 Tape Autoloader Rackmount
Kit NOTE: Required to install the 1/8
tape autoloader in a standard 19-inch rack. | C9268R |
NOTE: Please
reference the 1/8 Tape Autoloader QuickSpecs at https://www.hp.com/go/automation
for additional information needed to create a complete solution; reference current
compatibility information at https://www.hp.com/go/ebs. | |
|
Ultra Density Optical
Jukeboxes |
1900ux, 4 drive, 64 slot jukebox |
AA966A |
3800ux, 4 drive, 128 slot jukebox |
AA969A |
7100ux, 6
drive, 238 slot jukebox
|
AA971A |
NOTE: Please see
the HP StorageWorks Ultra Density Optical Jukeboxes QuickSpecs for a complete
listing of available jukeboxes at:
https://h18006.www1.hp.com/products/quickspecs/11944_div/11944_div.html
NOTE: Please reference the Ultra Density Optical Jukebox QuickSpecs
at https://www.hp.com/go/optical
for additional information needed to create a complete solution |
|
|
Power Cords |
NOTE: The HP ProLiant
DL360 G4 ships with an IEC-IEC power cord used for rack mounting with Power
Distribution Units (PDUs). For stand-alone deployments or installation without
a rack, power cord options are available. Model will ship with two power
cords: IEC-IEC (142257-002) and C13-Nema 5-15P (103541-001) cords. |
|
|
HP
StorageWorks Modular Smart Array 20 | HP
StorageWorks Modular Smart Array 20 NOTE:
Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant
power supplies. | 335921-B21 |
HP StorageWorks Modular Smart
Array 20 Starter Kit NOTE: Rack-mountable
12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies.
Includes Smart Array 6402/128 Controller. | 366172-B21 |
NOTE: The Modular
Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 3.5" Hot Plug Hard
Drives. | |
|
HP
StorageWorks Modular Smart Array 30 | HP
StorageWorks Modular Smart Array 30 SB NOTE:
Rack-mountable 14 drive enclosure with single bus, redundant power supplies | 302969-B21 |
HP StorageWorks Modular Smart
Array 30 DB NOTE: Rack-mountable 14
drive enclosure with dual bus, redundant power supplies | 302970-B21 |
NOTE: The Modular
Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320 Hot Plug Hard
Drives. | |
|
HP StorageWorks Modular Smart Array 500
|
HP StorageWorks Modular Smart Array 500 Generation 2
|
335880-B21
|
NOTE: Please see
the Modular Smart Array 500 Generation 2 QuickSpecs for additional information
including configuration steps and additional options needed for a complete
solution at:
https://h18000.www1.hp.com/products/quickspecs/11956_na/11956_na.html |
|
|
HP StorageWorks
Modular Smart Array 1500 cs |
Modular Smart Array 1500 Controller
Shelf |
AA986A
|
NOTE: Please see
the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options
and configuration information at:
https://www.hp.com/go/MSA1500cs |
|
|
StorageWorks
Options | StorageWorks
2 Gb, 64-bit/133 MHz PCI-X-to-Fibre Channel Host Bus Adapter for Windows 2000,
Windows Server 2003 and Linux NOTE: FCA2214 2 Gb Fibre Channel
Host Bus Adapter is a single channel, 64-bit/133 MHz PCI-X-to Fibre Channel Host
Bus Adapter (HBA) with an embedded multi-mode optical interface |
| FCA2404DC
- HP StorageWorks 2 Gb, Dual Channel, 133 MHz PCI-X-to-Fibre Channel Host Bus
Adapter for Windows® 2000, and Windows Server 2003 NOTE:
FCA2404DC HP StorageWorks 2 Gb Fibre Channel Host Bus Adapter is a dual channel,
133 MHz, PCI-X to Fibre Channel Host Bus Adapter (HBA) with an embedded multi-mode
optical interface. | 323264-B21 |
FCA2404 - StorageWorks 2 Gb,
single channel, 133 MHz PCI-X-to-Fibre Channel Host Bus Adapter for Windows 2000,
Windows NT and Windows Server 2003 NOTE:
FCA2404 StorageWorks 2 Gb, Fibre Channel Host Bus Adapter is a single channel,
multi-path failover, 133 MHz, PCI-X to Fibre Channel Host Bus Adapter (HBA) with
an embedded multi-mode optical interface for ProLiant Server connects |
305573-B21 | StorageWorks
2 Gb, Dual Port, 64-Bit/133 MHz PCI-X-to-Fibre Channel Host Bus Adapter for W2K,
Windows Server 2003 and Linux NOTE:
FCA2214DC StorageWorks 2 Gb Dual Port, Fibre Channel Host Bus Adapter is a 64-bit/133
MHz, PCI-X-to Fibre Channel Host Bus Adapter (HBA) with an embedded multi-mode
optical interface. | |
|
Uninterruptible Power
Systems – Rack Mountable |
HP UPS R1500 XR (1440VA, 1340
Watt), Low Voltage |
204404-001
|
HP UPS R3000 XR (2880VA, 2700
Watt), Low Voltage |
192186-001
|
HP UPS R3000 XR (3000VA, 2700
Watt), High Voltage |
192186-002
|
HP UPS R5500 XR, (5000VA, 4500
Watt), High Voltage |
|
HP UPS R12000 XR, N+ x (12KVA,
12KW) High Voltage |
207552-B22
|
NOTE: UPS R12000 has a hardwired input
and output connection.
|
|
|
HP
Monitored Power Distribution Unit (PDU) | HP
Monitored Power Distribution Unit: Full Rack Version |
| HP
17.3 kVA S2324 Monitored PDU- dual input, 3-phase, 24A |
| HP
8.3 kVA S1324 Monitored PDU- single input, 3-phase, 24A |
| HP
16.6 kVA S2140 Monitored PDU- dual input, 1-phase, 40A |
| HP
8.6 S1140 Monitored PDU- single input, 1-phase, 40A |
|
|
Modular PDUs 1U/0U
(Up to 32 outlets)
NOTE: 1U/0U mounting brackets
shipped with
the unit (optimized for 10000 and 9000 series racks).
|
Fixed Cord Extension Bars
NOTE: Two extension bar sticks; each
with (7) C13 plugs. |
351655-B21
|
Fixed Cord PDU
NOTE: Four Fixed Cord Extension Bars,
and one 24A, HV mPDU L6-30P core. |
351655-D72
|
HP Modular Power Distribution
Units (mPDU), Low Volt Model, 24A (100-127 VAC)
NOTE: This mPDU ( 252663-D71) may
also be used to connect the low volt model of the UPS R3000 XR. |
|
HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240
VAC)
|
252663-D72
|
HP Modular Power Distribution Units (mPDU), High Volt Model, 40A (200-240
VAC)
NOTE: This mPDU ( 252663-B21), 40A
model has a hardwired input.
|
252663-B21
|
HP Modular Power Distribution Unit(mPDU), High Volt Model, 16A (200-240
VAC)
|
252663-B24
|
HP Modular Power Distribution
Unit (mPDU), High Volt Model, 40A, Attached Cord |
252663-D73
|
NOTE: This PDU
has a detachable input power cord and allows for adaptability to country
specific power requirements. This model may also be used with the high volt
UPSs R3000 XR and R6000, need to order cable PN 340653-001. |
|
NOTE: Please see
the following Modular Power Distribution Unit (Zero-U/1U Modular PDUs) QuickSpecs
for additional options including shorter jumper cables and country specific
power cords:
https://h18000.www1.hp.com/products/quickspecs/11041_na/11041_na.html
|
|
|
USB Options |
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver) |
|
USB 1.44-MB External Diskette
Drive (Carbonite) |
DC141B
|
256MB HP Drive Key II (USB 2.0) |
PH657A
|
|
HP ProLiant DL360
G4 Deployment Options |
460W HP redundant power supply
with IEC cord only |
|
460W HP redundant power supply
with NEMA cord only
NOTE: The HP ProLiant DL360 G4 ships
with a single IEC-IEC power cord used for rack mounting with Power Distribution
Units (PDUs). For stand-alone deployments or installation without a rack,
power cord options are available. Model ships with two power cords: IEC-IEC
and NEMA cords.
|
|
|
Third Party Rack Kit |
Rack Adapter Kit
NOTE: This kit allows HP rack servers
to fit in racks that are 24" wide.
|
332815-B21
|
|
HP Rack 5000 Series
(Graphite Metallic)
|
HP 5642 Rack Unassembled |
|
|
Rack Options for Rack 5000 Series
|
Stabilizer Kit for 5642 rack (Graphite
Carbon)
NOTE: The stabilizing kit is used
to prevent rack from tipping over.
|
374493-B21
|
|
Baying Kit for 5642 rack (Graphite
Carbon)
NOTE: The baying kit is used to join
two or more HP 5642 racks.
|
374499-B21
|
|
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
| 10642
G2 (42U) Rack Cabinet - Pallet | |
10642 G2 (42U) Rack Cabinet -
Shock Pallet | |
10642 G2 (42U) Rack Cabinet -
Crated | AF003A |
10642 G2 (42U) Rack Cabinet,
with Extension - Shock Pallet | |
10642 G2 (42U) Rack Cabinet,
without door - Shock Pallet | AF005A |
10642 G2 (42U) Rack Cabinet -
with Extension, without door - Shock Pallet | AF006A |
10636 G2 (36U) Rack Cabinet -
Pallet | |
10636 G2 (36U) Rack Cabinet -
Shock Pallet | |
10636 G2 (36U) Rack Cabinet -
Crated | |
10636 G2 (36U) Rack Cabinet ,
with Extension - Shock Pallet | |
10636 G2 (36U) Rack Cabinet,
without door - Shock Pallet | AF015A |
10636 G2 (36U) Rack Cabinet,
with Extension, without door - Shock Pallet | AF016A |
NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed. | |
NOTE: Please
see the Rack 10000 G2 QuickSpecs for Technical Specifications such as height,
width, depth, weight, and color: https://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html
| | NOTE:
For additional information regarding Rack Cabinets, please see the following URL:
https://www.hp.com/go/rackandpower. | |
|
Rack Options for Rack 10000 G2 Series | HP
10642 G2 Front Door | AF009A |
HP 10636 G2 Front Door | AF019A |
10642 G2 (42U) Side Panels (set
of two) (Graphite Metallic) | AF054A |
10636 G2 (36U) Side Panels (set
of two) (Graphite Metallic) | AF056A |
10636 G2 Rear Extension Kit | AF060A |
600mm G2 Stabilizer Option Kit
(Graphite) | AF062A |
600mm G2, Heavy Duty Stabilizer
Option Kit (Graphite) | AF064A |
800mm G2 Stabilizer Option Kit
(Graphite) | AF066A |
800mm G2, Heavy Duty Stabilizer
Option Kit (Graphite) NOTE: Supports
10000 G2 Series only.
| AF068A |
HP 10000 G2 Rack Grounding Kit | AF074A |
600W 10K G2 Rack Tie Down | AF076A |
NOTE: For additional
information regarding Rack Options, please see the following URL: https://www.hp.com/go/rackandpower. | |
|
HP Rack 10000 Series (Graphite
Metallic) | 10642 (42U)
Infrastructure Rack (Low Voltage) |
379006-001 | 10642
(42U) Infrastructure Rack (High Voltage) |
| HP
Rack S10614 (14U) Rack Cabinet - Shock Pallet |
|
HP Rack 10842 (42U, 800mm wide) – Pallet |
257415-B21
|
HP Rack 10842 (42U, 800mm wide) – Shock Pallet |
257415-B22
|
HP Rack 10647 (47U) – Pallet |
245160-B21
|
HP Rack 10647 (47U) – Crated |
245160-B23 |
HP Rack 10642 (42U) – Pallet |
245161-B21
|
HP Rack 10642 (42U) – Shock Pallet |
245161-B22
|
HP Rack 10642 (42U) – Crated |
245161-B23 |
HP Rack 10636 (36U) – Pallet |
245162-B21
|
HP Rack 10636 (36U) – Shock Pallet |
245162-B22
|
HP Rack 10636 (36U) – Crated |
245162-B23 |
HP Rack 10622 (22U) – Pallet |
245163-B21
|
HP Rack 10622 (22U) – Shock Pallet |
245163-B22
|
HP Rack 10622 (22U) – Crated |
245163-B23 |
NOTE: -B21 (pallet) used to ship
empty racks shipped on a truck -B22 (shock pallet) used to ship racks with
equipment installed (by custom systems, VARs and Channels) -B23 (crated) used
for air shipments of empty racks |
|
NOTE: It is mandatory to use a shock
pallet in order to ship racks with equipment installed. Not all HP equipment is
qualified to be shipped in the Rack 10000 series |
|
NOTE: Please see the Rack 10000 QuickSpecs
for Technical Specifications such as height, width, depth, weight, and color:
https://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.html |
|
NOTE: For additional information regarding
Rack Cabinets, please see the following URL: https://www.hp.com/go/rackandpower. |
|
|
Rack Options for Rack 10000 Series | HP
Rack Light Kit (Neon) | |
HP Rack Plinth Kit (Carbon) |
| 42U
Side Panel - Graphite Metallic |
| 36U
Side Panel - Graphite Metallic |
| 47U
Side Panel - Graphite Metallic |
| TFT7210R
Rack Mounted 17" Monitor NOTE: For
a complete list of Monitors please view the following URL: https://www.hp.com/go/kvm.
| |
TFT5600 Rack Keyboard Monitor
NOTE: For a complete list of Monitors please
view the following URL: https://h18004.www1.hp.com/products/monitors/. |
| 1U
Rack Keyboard & Drawer (Carbon) |
| NOTE:
For additional information regarding Rack Cabinets, please see the following URL:
https://www.hp.com/go/rackandpower. | |
|
HP KVM Switch Options
|
IP Console Switch Box (KVM/IP),
3 x 1 x 16 |
|
IP Console Switch Box (KVM/IP),
1 x 1 x 16 |
|
Server Console Switch (KVM), 0
x 1 x 8 port |
|
Server Console Switch (KVM), 0
x 2 x 16 port |
|
PS/2 Interface Adapter, 1 pack |
|
PS/2 Interface Adapter, 8 pack |
|
USB Interface Adapter, 1 pack |
|
Serial Interface adapter - 1 Pack
with power supply |
|
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: https://www.hp.com/go/kvm.
|
|
HP 1x 4 USB/PS2 KVM Switch, TT
|
371301-D71
|
HP 1x 4 USB/PS2 KVM Switch, RM
|
371302-B21
|
HP PS2 KVM Cable with audio, 6',
2-pack |
371730-B21
|
HP USB KVM Cable with audio, 6',
2-pack |
371729-B21
|
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: https://www.hp.com/go/kvm.
|
|
|
HP Serial Console Server Options
|
HP 16 Port Serial Console Server
|
|
HP 48 Port Serial Console Server
|
|
Serial Adapter, RJ45-DB9 DCE Female,
1 Pack |
|
Serial Adapter, RJ45-DB9 DCE Female,
8 Pack |
AF110A
|
NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: https://www.hp.com/go/kvm.
|
|
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: https://www.hp.com/go/kvm. |
|
|
Service
and Support Offerings (HP Care Pack Services) |
Hardware Services
4-Hour On-site Service |
|
4-Hour On-site Service,
5-Day x 13-Hour Coverage, 3 Years, Electronic |
U4496E
|
4-Hour On-site Service,
7-Day x 24-Hour Coverage, 3 Years, Electronic |
U4497E
|
Hardware Services
6-Hour Call to Repair On-site Service |
|
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
U4498E
|
Hardware Services
Next Business Day On-Site Service |
|
Hardware Installation, Electronic |
U4506E
|
Installation & Start-Up
of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F,
excl. HP holidays, Electronic |
U4507E
|
Support Plus |
|
Onsite HW support, 8am-9pm,
M-F, 4hr response and Microsoft O/S SW Tech support offsite, onsite
at HP's discretion, 8am-9pm, M-F 2hr response time excl. HP holidays,
Electronic |
U4508E
|
Support Plus 24 |
|
Onsite HW support 24x7,
4hr response and Microsoft O/S SW Tech support offsite, onsite at
HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic |
U4509E
|
Onsite HW support 24x7,
4hr response and SuSE Linux SW Tech support offsite, onsite at HP's
discretion, 24x7 2hr response time incl. HP holidays, Electronic |
U6310E
|
Onsite HW support 24x7,
4hr response and Red Hat ES2.1 Linux SW Tech support offsite, onsite
at HP's discretion, 24x7 2hr response time incl. HP holidays, Electronic |
U8332E
|
NOTE:
For more information, customer/resellers can contact https://www.hp.com/services/carepack. |
|
|
Memory
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models". |
HP ProLiant DL360 G4 3.06 GHz and 3.4 GHz-1MB Models
|
Standard Memory
1 GB PC2700 DDR 333 Registered SDRAM DIMM installed (1 x 1 GB SDRAM DIMM)
Upgrading Memory and Memory Interleaving
When upgrading memory, DIMMs 1A and 2A must match. DIMMs 3B and 4B must
match and must be installed as a pair. When DIMMs 1A and 2A are populated
the system is automatically configured for 2:1 interleaving. When all
four DIMMs are populated with identical DIMMs the system is automatically
configured for bank interleaving. Bank B can be configured for Online
Spare Memory.
Standard Memory Plus Optional Memory
Up to 6 GB memory is available with the standard memory of 1 GB and the
optional installation of PC2700 DDR 333 Registered SDRAM DIMM memory kits.
Standard Memory Replaced with Optional Memory
Up to 8 GB of memory is available with the removal of the standard 1 GB
of memory and the optional installation of PC2700 DDR 333 Registered SDRAM
DIMM memory kits.
NOTE:
Chart does not represent all
possible configurations. |
DL360 G4 Memory
|
Slot
|
|
1
|
2
|
3
|
4
|
Standard
|
1 GB
|
1 GB
|
Empty
|
Empty
|
Empty
|
Optional
|
6 GB
|
1 GB
|
1 GB
|
2 GB
|
2 GB
|
Maximum
|
8 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
HP ProLiant DL360 G4 3.4 GHz-1MB RPS Models
|
Standard Memory
2 GB PC2700 DDR 333 Registered SDRAM DIMM installed (2 x 1 GB SDRAM DIMM)
Upgrading Memory and Memory Interleaving
When upgrading memory, DIMMs 1A and 2A must match. DIMMs 3B and 4B must
match and must be installed as a pair. When DIMMs 1A and 2A are populated
the system is automatically configured for 2:1 interleaving. When all
four DIMMs are populated with identical DIMMs the system is automatically
configured for bank interleaving. Bank B can be configured for Online
Spare Memory.
Standard Memory Plus Optional Memory
Up to 6 GB memory is available with the standard memory of 1 GB and the
optional installation of PC2700 DDR 333 Registered SDRAM DIMM memory kits.
Standard Memory Replaced with Optional Memory
Up to 8 GB of memory is available with the removal of the standard 1 GB
of memory and the optional installation of PC2700 DDR 333 Registered SDRAM
DIMM memory kits.
NOTE: Chart does not represent
all possible configurations.
|
DL360 G4 Memory
|
Slot
|
|
1
|
2
|
3
|
4
|
Standard
|
2 GB
|
1 GB
|
1 GB
|
Empty
|
Empty
|
Optional
|
6 GB
|
1 GB
|
1 GB
|
2 GB
|
2 GB
|
Maximum
|
8 GB
|
2 GB
|
2 GB
|
2 GB
|
2 GB
|
|