|
 DL QuickSpecs
|
DL20
|
|
|
DL60
|
|
|
DL80
|
|
|
DL120
|
|
|
DL140
|
|
|
DL145
|
|
|
DL160
|
|
|
DL160se
|
|
|
DL165
|
|
|
DL180
|
|
|
DL185
|
|
|
DL320
|
|
|
DL325
|
|
|
DL345
|
|
|
DL360
|
|
|
DL365
|
|
|
DL380
|
|
|
DL385
|
|
|
DL388
|
|
|
DL560
|
|
|
DL580
|
|
|
DL585
|
|
|
DL740
|
|
|
DL760
|
|
|
DL785
|
|
|
DL1000
|
|
|
|
ML QuickSpecs
|
ML30
|
|
|
ML110
|
|
|
ML115
|
|
|
ML150
|
|
|
ML310
|
|
|
ML330
|
|
|
ML350
|
|
|
ML370
|
|
|
ML530
|
|
|
ML570
|
|
|
ML750
|
|
|
|
BL QuickSpecs
|
BL10e
|
|
|
BL20p
|
|
|
BL25p
|
|
|
BL260c
|
|
|
BL280c
|
|
|
BL2x220c
|
|
|
BL30p
|
|
|
BL35p
|
|
|
BL40p
|
|
|
BL420c
|
|
|
BL45p
|
|
|
BL460c
|
|
|
BL465c
|
|
|
BL480c
|
|
|
BL495c
|
|
|
BL60p
|
|
|
BL620c
|
|
|
BL660c
|
|
|
BL680c
|
|
|
BL685c
|
|
|
BL860c
|
|
|
|
SL QuickSpecs
|
SL160z
|
|
|
SL165z
|
|
|
SL170s
|
|
|
SL170z
|
|
|
SL230s
|
|
|
SL250s
|
|
|
SL270s
|
|
|
SL2x170z
|
|
|
SL335s
|
|
|
SL390s
|
|
|
SL4540
|
|
|
SL4545
|
|
|
|
XL QuickSpecs
|
XL170r
|
|
|
XL190r
|
|
|
XL220a
|
|
|
XL230a
|
|
|
XL730f
|
|
|
XL740f
|
|
|
XL750f
|
|
|
|
CL QuickSpecs
|
CL1850
|
|
CL1850 G1
| |
CL380
|
|
CL380 G1
| |
|
|
|
|
|
|
 |
Proliant DL320 G3 QuickSpecs |
 US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant DL320 G3 Overview
|
HP ProLiant DL320 Generation 3 (G3)
|
|
|
1.
|
Support for up to two SATA or SCSI non-hot plug
hard drives |
5.
|
Fan Assembly, 4 NHP Dual Rotor Fans with N+1 Redundancy |
|
2.
|
Optional 1.44MB Diskette Drive Assembly Option
Kit |
6.
|
Two PCI-X slots standard with an optional PCI
Express slot |
|
3.
|
Optional CD-ROM/DVD-ROM Drive Assembly Option
Kit |
7.
|
4 - PC3200 DDR1 Memory Slots |
|
4.
|
Front LED Indicators |
8.
|
Power Supply |
|
|
|
What's New
- Intel Pentium 4 Processor 660 with HT Technology
and EM64T 3.6 GHz 2MB Level 2 Cache
- Hot Plug SATA and SAS (Serial Attached SCSI) Drive
support with the optional 8 port Internal SAS HBA
- Optional CD-RW/DVD Combo Drive
- Support for new iLO Shared Network Port enables
access to the iLO management processor through one of the embedded system
NICs
|
|
At
a Glance
- Several processor options
to choose from:
- Intel Celeron D Processor
340J 2.93 GHz/533MHz FSB 256KB Level 2 Cache
- Intel Pentium
4 Processors with HT Technology and EM64T 3.4 GHz with 1M or 2M L2 Cache
- Intel
Pentium 4 Processors with HT Technology and EM64T 3.6 GHz with 1MB or 2MB Level
2 Cache (Factory Integrated Only)
- Up to 4GB
of advanced ECC PC3200 DDR 400MHz SDRAM Memory
-
1 GB standard in all Pentium 4 models
- 512 MB in Celeron D
models
- Two available PCI-X slots, including one
full-length 64-bit/133MHz slot and one half-length, low-profile 64-bit/100MHz
slot
- Optional PCI-Express full-length slot
- Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter
- Integrated
iLO Remote Management
- HP embedded 2 Port SATA Controller
with RAID 0/1 support
- 1U (1.75") Form Factor
- Optional
CD,DVD, or CD-RW/DVD Combo drive and Floppy drive
- Four USB
ports (1 front, 1 internal and 2 in rear)
- Intel E7221 Chipset
with 800MHz Front Side Bus (533MHz for Celeron Processors)
- New
spring-loaded Universal sliding rails for in rack servicing ship standard
- Automatic
Server Recovery (ASR), ROM Based Setup Utility (RBSU), HP System Insight Manager,
Status LEDs including system health and UID and SmartStart
- Internal
Storage capacity of 1TB (2 x 500GB SATA) or 144GB (2 x 72GB U320 or SAS)
- 350
Watt PFC Power Supply
- Internal USB port can also be used
as internal USB port for leave-in USB key support
- Protected
by HP Services and a worldwide network of resellers and service providers. Three-year
Next Business Day, on-site limited global warranty. Certain restrictions and exclusions
apply. Pre-Failure Notification on processors, memory, and SCSI hard drives. SATA
hard drives have a one-year warranty.
|
Standard Features
Processor
One of the following depending on Model
|
Intel Celeron D
2.93 GHz |
| Intel Pentium 4
with HT Technology and EM64T 3.4 GHz |
| Intel Pentium 4
with HT Technology and EM64T 3.6 GHz (Factory Integrated Only) |
|
Processor Cache
One of the following depending on Model
|
256KB Level 2 Cache
(Celeron D models) |
| 1MB Level 2 Cache
(Pentium 4 models) |
| 2MB Level 2 Cache
(Pentium 4 models) |
|
|
Chipset
One of the following depending on Model
|
Intel E7221 chipset
with 800MHz Front Side Bus (Pentium 4 Models) |
| Intel E7221 chipset
with 533MHz Front Side Bus (Celeron D Models) |
|
Memory Protection
|
Advanced ECC |
|
Memory
One
of the following depending on Model
|
Type |
PC3200 DDR SDRAM running at
400MHz |
Standard
(Pentium 4 models) |
1 GB (1x 1024 MB) |
Standard
(Celeron D models)
|
512 MB (1 x 512 MB) |
| Maximum |
4 GB |
|
| Network Controller |
Embedded NC7782
Dual Port PCI-X 10/100/1000T Gigabit network adapter |
|
| Expansion Slots |
Slot Number
|
Bus Speed
|
Height
|
Hot Plug
|
PCI Voltage
|
| PCI-X Non Hot-Plug
Riser |
1
|
64-bit/133 MHz PCI-X
|
Full
|
no
|
3.3 Volt
|
|
2
|
64-bit/100 MHz PCI-X
|
Half
|
no
|
3.3 Volt
|
| PCI-Express Non
Hot-Plug Riser (Optional) |
1
|
PCI Express x4
(x8 connector)
|
Full
|
no
|
N/A
|
|
2
|
64-bit/100 MHz PCI-X
|
Half
|
no
|
3.3 Volt
|
|
| Storage Controllers |
HP embedded 2 Port
SATA Controller with RAID 0/1 support. SAS and SCSI controllers available
via PCI card. |
|
| Storage |
Diskette Drive |
Optional
1.44 MB Diskette Drive option kit is available
NOTE: Purchase of floppy drive is
required to implement embedded SATA RAID 0/1 with SmartStart 7.2. |
| Optical Drive |
Optional
CD-ROM, DVD-ROM option kits available
NOTE: Purchase of CD-ROM is required
for installation of SmartStart. |
| Hard Drives |
One of the following: (depending
on model): |
None
|
80GB SATA HDD
|
|
| Maximum
Internal Storage Type | Non-Hot
Plug SCSI | 144GB |
2 x 72GB Ultra320 | | Hot
Plug SAS | 292GB |
2 x 146GB SAS | | Hot
Plug SATA | 1TB |
2 x 500GB Serial ATA |
|
| Graphics |
Integrated ATI RAGE XL Video
Controller with 8-MB SDRAM Video Memory |
|
| Form Factor |
Rack (1U), (1.70 in/4.45 cm) |
|
|
ProLiant Essentials
Foundation Pack Software |
| HP
Systems Insight Manager | HP's
new HP Systems Insight Manager (HP SIM) helps maximize system uptime and performance
and reduce system maintenance costs by providing proactive notification of problems
before those problems result in unplanned downtime or reduced productivity. HP
SIM are both easy to set up work with the Insight Management Agents, integrated
Lights-Out and Version Control Agents to deliver robust fault, configuration,
and asset management as well as remote administration. With HP SIM customers will
also be able to take advantage of role-based security; the ability to manage ProLiant,
Integrity, and HP 9000 systems; and plug-ins for storage, client, printer, and
power management as well as server rapid deployment, performance management, and
workload management. For more details on HP SIM visit https://www.hp.com/go/hpsim. |
|
| SmartStart | SmartStart
is a tool that simplifies server setup, providing a rapid way to deploy reliable
and consistent server configurations. For more information, please visit the SmartStart
Web site at
https://www.hp.com/servers/smartstart.
SmartStart version supported (minimum): SmartStart
7.2. | |
| Insight
Management Agents | The
Insight
Management Agents form the foundation for HP's Intelligent Manageability strategy.
They provide direct, browser-based access to in-depth instrumentation built into
HP servers, workstations, desktops, and portables, and send alerts to HP Systems
Insight Manager and other enterprise management applications in case of subsystem
or environmental failures. For additional information about the Management Agents
and other management products from HP, please visit the management Web site at
https://www.hp.com/servers/manage. |
|
| Subscriber's Choice | Subscriber's
Choice Driver and Support Alerts/Notifications is a web-based email subscription
service that provides automatic delivery of software and driver change notifications
for ProLiant products. Sign up at https://www.hp.com/go/subscriberschoice
and customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis. | |
ROMPaq,
support software, and
configuration utilities | The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options available in SmartStart or downloadable from Software and Drivers
download pages, linked from the SmartStart website at https://www.hp.com/servers/smartstart. |
|
| Survey Utility and diagnostics
utilities | The most advanced
configuration analysis, reporting and troubleshooting utilities used by HP and
at your fingertips, available in SmartStart. | |
| Optional
ProLiant Essentials Value Packs |
Optional software offerings that selectively extend the functionality of an
Adaptive Infrastructure to address specific business problems and needs:
- Rapid Deployment Pack (RDP) is an automated deployment and
provisioning solution for all ProLiant servers. RDP includes the
ProLiant Integration Module featuring ProLiant server pre-configured
events for OS installation, and optimized software drivers, firmware
and management agents. Every RDP disc includes 10-node trial licenses
for evaluation purposes. RDP requires a license for each server
deployed and is available for purchase with HP servers. For more
information, visit: https://www.hp.com/servers/rdp.
- Workload Management Pack - provides easier management of complex
environments, improving overall server utilization and enabling
Windows® 2000 customers for the first time to confidently deploy
multiple applications on a single multiprocessor ProLiant Server.
- Integrated Lights-Out Advanced Pack - upgrades the Integrated
Lights-Out processor to full virtual presence and control with
graphical console and virtual media.
- Performance Management Pack - a performance management solution
that identifies and explains hardware performance bottlenecks
on ProLiant servers and attached options enabling users to better
utilize their valuable resources.
- Intelligent Networking Pack - detects and analyzes network bottlenecks
or broken network linkages and steers traffic to the optimum route
based on network conditions, plus it provides an extra layer of
protection. The virus throttle feature of the solution slows the
propagation of fast spreading virus
- Vulnerability and Patch Management Pack - identifies and remediates
software security vulnerabilities due to missing patches as well
operating system configurations that can be exploited by viruses,
worms, and other blended threats
- Virtual Machine Management Pack - provides central management
and control of virtual machines from Microsoft and VMware. Integrated
approach provides the ability to manage both physical and virtual
resources from a single management console.
- Server Migration Pack - The Server Migration Pack automates
the manual processes required for migrating servers between physical
or virtual platforms (P2V, V2P, and V2V).
|
| NOTE:
Flexible and volume quantity license kits are available for ProLiant Essentials
Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials |
|
| Industry Standard
Compliance |
ACPI 2.0 |
| PCI 2.2 Compliant |
| PXE Support |
| WOL Support |
| Microsoft® Logo certifications |
| USB 2.0 |
|
| Intelligent
Manageability |
Automatic Server Recovery (ASR)
iLO Advanced Pack (optional)
HP Systems Insight Manager
Integrated Management Log
Drive Parameter Tracking (with Smart Array Controllers)
Dynamic Sector Repairing (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SCSI hard drives and memory) |
|
| Security |
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
Removable CD-ROM/Diskette Drive Assembly
Administrator's password |
|
| Server Power Cords |
North America |
One 12' Lowline and one 10'
Highline (IEC-IEC) power cord ships standard |
| Japan |
One 10' IEC (Highline) and one
12' Lowline power cord ships standard |
| ROW |
One 10' Highline (IEC) power
cord ships standard |
| Localized cables included with
geographic specific models in other world regions. |
|
| Power Supply |
Auto-sensing 350-Watt PFC Power
Supply, CE Mark Compliant |
|
| System Fans |
4 dual rotor fans ship standard.
4 dual rotor fans total supported internally. N+1 (1 rotor only) Redundancy. |
|
| Rack
Airflow Requirements |
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
|
|
CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the equipment:
- Front and rear doors: If your 42U server rack includes closing front
and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the required
64 percent open area for ventilation).
- Side: The clearance between
the installed rack component and the side panels of the rack must be a minimum
of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to
fill all remaining empty front panel U-spaces in the rack. This arrangement ensures
proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation
Guide or the Documentation CD provided with the server, or to the server
documentation located in the Support section at the following URL: https://h18004.www1.hp.com/products/servers/proliantdl320/index.html.
|
|
| HP Factory Express Capabilities |
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to https://www.hp.com/go/factory-express.
|
|
| Service and Support |
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of resellers and service providers.
Hardware diagnostic support and repair is available for three years from
date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Additional support may be covered under
the warranty or available for an additional fee. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements.
NOTE: Limited warranty includes
3 year parts, 1 year labor, 1-year on-site support.
NOTE: SATA drives have a 1 year warranty.
Care Pack services provide a range of life cycle support options that
let you choose the service levels that meet your business requirements,
from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available
including:
- Installation and start up
- Education courses
- Extended onsite hardware coverage hours from same business day 13
hours, 5 day to 24 hours, 7 days call window with options including
4-hour response or 6-hour Call To Repair
- Comprehensive range of software technical support for Microsoft, Linux,
ProLiant Essentials and VMWare-based IT solutions helping to deliver
high level of application availability. Response times range from 30
mins for critical problems to 2 hours.
- System Management, Performance Services and Mission Critical Support
Solution
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server, purchased at the same time or afterward, internal
to the enclosure, as well as 22" and smaller external monitors and
tower UPS options up to 3kVA; these items will be covered at the same
service level and for the same coverage period as the server. Coverage
of UPS Battery is not included, standard warranty terms & conditions
apply. For servers or storage systems installed within a rack, service
also covers all HP qualified rack options installed within the same rack.
|
NOTE: For more
information on HP Care Pack services, contact any of our worldwide sales
offices or resellers or visit our worldwide Web site on the internet at:
https://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers
and resellers, please visit us at: https://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and
technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html |
Models
DL320R03
C2.93-256KB, 512MB
372708-xx1
| Processor(s) | Intel
Celeron D Processor 340J 2.93 GHz | | Cache
Memory | 256KB Level 2 cache |
| Chipset | Intel
E7221 chipset with 533MHz Front Side Bus | | Memory | 512
MB (Standard) to 4 GB (Maximum) of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
| Network Controller | Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter | | Storage
Controller | Intel® 82801FR Integrated
Serial ATA Host Controller | | Hard
Drives | None ship standard |
| Drive Backplane/Cables | None
ship standard - See ProLiant DL320 G3 Unique Options below for required hard drive
option kits and hard drives. | | Internal
Storage | 1TB for SATA models,
144GB for SCSI models | | Optical
Drive | Optional |
| Diskette Drive | Optional |
| Form Factor | Rack
(1U), (1.75 in/4.45 cm) |
|
DL320R03
P3.4-1MB, 1GB
372709-xx1
| Processor(s) | Intel
Pentium 4 Processor 541 with HT Technology and EM64T 3.4 GHz | | Cache
Memory | 1MB Level 2 Cache |
| Chipset | Intel
E7221 chipset with 800MHz Front Side Bus | | Memory | 1
GB (standard) to 4 GB (Maximum) of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
| Network Controller | Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter | | Storage
Controller | Intel 82801FR Integrated
Serial ATA Host Controller | | Hard
Drives | None ship standard |
| Drive Backplane/Cables | None
ship standard - See ProLiant DL320 G3 Unique Options below for required hard drive
option kits and hard drives. | | Internal
Storage | 1TB for SATA models,
144GB for SCSI models | | Optical
Drive | Optional |
| Diskette Drive | Optional |
| Form Factor | Rack
(1U), (1.75 in/4.45 cm) |
|
DL320R03
P3.4-1MB, 1GB, 80GB SATA
370669-xx1 | Processor(s) | Intel
Pentium 4 Processor 541 with HT Technology and EM64T 3.4 GHz | | Cache
Memory | 1MB Level 2 Cache |
| Chipset | Intel
E7221 chipset with 800MHz Front Side Bus | | Memory | 1
GB (standard) to 4 GB (Maximum) of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
| Network Controller | Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter | | Storage
Controller | Intel 82801FR Integrated
Serial ATA Host Controller | | Hard
Drives | 80GB SATA HDD |
| Drive Backplane/Cables | DL320
G3 SAS/SATA HDD Backplane Option Kit | | Internal
Storage | 1TB for SATA models,
144GB for SCSI models | | Optical
Drive | Optional |
| Diskette Drive | Optional |
| Form Factor | Rack
(1U), (1.75 in/4.45 cm) |
|
DL320R03
P3.4-2MB, 1GB
372710-xx1
| Processor(s) | Intel
Pentium 4 Processor 650 with HT Technology and EM64T 3.4 GHz | | Cache
Memory | 2MB Level 2 Cache |
| Chipset | Intel
E7221 chipset with 800MHz Front Side Bus | | Memory | 1
GB (standard) to 4 GB (Maximum) of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
| Network Controller | Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter | | Storage
Controller | Intel 82801FR
Integrated Serial ATA Host Controller | | Hard
Drives | None ship standard |
| Drive Backplane/Cables | None
ship standard - See ProLiant DL320 G3 Unique Options below for required hard drive
option kits and hard drives. | | Internal
Storage | 1TB for SATA models,
144GB for SCSI models | | Optical
Drive | Optional |
| Diskette Drive | Optional |
| Form Factor | Rack
(1U), (1.75 in/4.45 cm) |
|
DL320R03
P3.4-2MB, 1GB, 80GB SATA
370670-xx1
| Processor(s) | Intel
Pentium 4 Processor 650 with HT Technology and EM64T 3.4 GHz | | Cache
Memory | 2MB Level 2 Cache |
| Chipset | Intel
E7221 chipset with 800MHz Front Side Bus | | Memory | 1
GB (standard) to 4 GB (Maximum) of Advanced ECC PC3200 DDR SDRAM DIMM Memory |
| Network Controller | Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter | | Storage
Controller | Intel 82801FR Integrated
Serial ATA Host Controller | | Hard
Drives | 80GB SATA HDD |
| Drive Backplane/Cables | DL320
G3 SAS/SATA HDD Backplane Option Kit | | Internal
Storage | 1TB for SATA models,
144GB for SCSI models | | Optical
Drive | Optional |
| Diskette Drive | Optional |
| Form Factor | Rack
(1U), (1.75 in/4.45 cm) |
|
| Country Code Key |
XX=00 |
NA |
| XX=29 |
Japan |
| XX=37 |
APD |
| XX=42 |
EURO |
| XX=AA |
PRC |
Configuration Information - Factory Integrated Models (North America only)
NOTE:
For Configure to Order requirements within EMEA region, please consult local
Sales Contact.
NOTE: HP does not allow factory integration of options
into standard models listed above.
Configure-to-order servers must start
with a CTO Chassis.
NOTE: This product offering does not support HP
Factory Express Server Configuration Level 1. | | Step
1: Base Configuration (choose one of the following configurable models) |
| Models
| HP ProLiant DL320G3
SATA Rack CTO Chassis (North America) | 374295-405 |
| Factory Integrated
Model ships with: | | Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter
| |
| 1 full length/height
and 1 half length-low profile 64bit PCI-X slot | |
| Integrated Lights-Out
(iLO) embedded | | | DL320
G3 SAS/SATA HDD Backplane Option Kit | |
| Rack (1U) form factor,
(1.75 in/4.45 cm) | | | | |
| HP ProLiant DL320G3
SCSI Rack CTO Chassis (North America) | 383338-405 |
| Factory Integrated
Model ships with: | | Embedded
NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter
| |
| 1 full length/height
and 1 half length-low profile 64bit PCI-X slot | |
| Non Hot Plug U320
SCSI Option Kit | | | Integrated
Lights-Out (iLO) embedded | | | DL320
G3 Non Hot Plug U320 SCSI Option Kit | |
Rack (1U) form factor,
(1.75 in/4.45 cm)
| |
|
| Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted) |
| Processors
|
X3.6/PIV/2M DL320G3
FIO ALL |
399664-B21
|
| X3.4/PIV/2M DL320G3
FIO Base |
385652-B21
|
| X3.6/PIV/1M DL320G3
FIO Base |
374868-B21
|
| X3.4/PIV/1M DL320G3
FIO Base |
374867-B21
|
| X2.93/CELERON/256KB
DL320G3 FIO Base |
374866-B21
|
| Base
Memory |
512 MB of Advanced
ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 512 MB) |
|
| 1024 MB of Advanced
ECC PC3200 DDR SDRAM DIMM Memory Kit (1 X 1024 MB) |
|
| Optical
Drive |
HP DVD/CD RW Drive
Option (ALL) |
377402-B21
|
DL320G3 CD Drive
NOTE: Required for installation of SmartStart and OS. |
|
| DL320G3 DVD-ROM Drive |
|
DL320G3 FLOPPY DRIVE
NOTE: Required for installation of SW SATA RAID. |
372702-B21
|
|
| Step
3: Choose Additional Factory Integratable Options | | Controllers | 64-Bit/133-MHz
Single Channel Ultra320 SCSI HBA G2 |
| HP
8 Internal Port SAS HBA with RAID
NOTE:
The HP 8 Internal Port SAS/SATA HBA with RAID requires the purchase of the SATA
Rack FIO model and the DL320 SAS/SATA Hot Plug Cable option kit ( 398307-B21)
| |
| Smart Array 6404/256
Controller | |
| Smart Array 6402/128
Controller | |
| Smart Array 641
Controller | |
| Smart Array 642
Controller | |
| Hard
Drives | Ultra320
Non-Hot Plug | |
HP 36GB U320 15K NHP
HDD
| |
| HP 72GB U320 10K
NHP HDD | |
| Serial Attached
SCSI - SAS | |
| HP 36GB 3G SAS 15K 3.5"
HDD | |
| HP 72GB 3G SAS 15K
3.5" HDD | |
| HP 146GB 3G SAS
15K 3.5" HDD | |
| Serial ATA (SATA) | |
| HP 80GB 1.5G SATA
7.2K 3.5" HDD | |
| HP 160GB 1.5G SATA
7.2K 3.5" HDD | |
| HP 250GB 1.5G SATA
7.2K 3.5" HDD | |
| HP 500GB 1.5G SATA
7.2K 3.5" HDD | |
| NOTE:
Please note that Serial ATA hot-plug capability and drive LEDs are not supported
by the DL320 G3 embedded SATA storage controller. | |
|
| Step
4: Choose Additional Options for Factory Integration |
| NOTE: For additional
options, please refer to the "Options" section below. |
Options
|
ProLiant DL320 G3 Unique Options | HP
ProLiant DL320 G3/G4 PCI Option Kit
NOTE:
The PCI riser board assembly ships standard with two riser boards
- Full-length
PCI-X riser board
- Half-length riser board
-
PCI-X (ProLiant DL320 G3 server)
The
PCI riser board assembly supports an optional full-length PCI Express riser board
in place of the full-length PCI-X riser board. | 417135-B21 |
| PCI-X/PCI-EXPRESS
RISER | 374281-B21 |
| Floppy Drive Option
Kit | 372702-B21 |
| HP DVD/CD RW Drive
Option (ALL) | 377402-B21 |
| DVD ROM Drive Option |
| | CD
ROM Drive Option | |
DL320 Hot Plug SAS/SATA
Cable Option Kit
NOTE: This option
is required for the HP 8 int. Port SAS/SATA HBA with RAID. This option with the
addition of the DL320G3 SAS/SATA HDD Backplane Option Kit and the HP 8 int. Port
SAS/SATA HBA with RAID enables the DL320 G3 for Hot Plug and LED drive support.
| |
DL320 G3 SAS/SATA
HDD Backplane Option Kit
NOTE: This
option is required on the non-hard drive models for any supported SATA HDD options.
| 372704-B21 |
DL320 G3 Non Hot
Plug U320 SCSI Option Kit
NOTE: This
option is required for use with any supported non Hot Plug U320 SCSI HDD options.
A PCI controller is also required; please see Storage Controllers below for U320
controller options.
|
374282-B21 |
|
ProLiant
Essentials
Value Pack Software |
ProLiant Essentials
Integrated Lights-Out Advanced Pack |
|
ProLiant Essentials
Integrated Lights-Out Advanced Pack, 1 server
Featuring:
sophisticated virtual administration
features for ultimate control of servers in the data centers and remote
sites. |
|
| NOTE:
For additional ProLiant Integrated Light-Out Advanced Pack License
Kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11052_div/11052_div.html |
|
| ProLiant Essentials
Intelligent Networking Pack |
|
ProLiant Essentials
Intelligent Networking Pack, Single Server License
NOTE: For use with a single server. Contains one license with a unique
license activation key and documentation. |
372906-B21
|
| NOTE:
For additional ProLiant Intelligent
Networking Pack License Kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12062_div/12062_div.html |
|
| ProLiant Essentials
Intelligent Networking Pack - Linux Edition, Single Server License |
397004-B21
|
NOTE:
For additional ProLiant Intelligent Networking Pack - Linux License Kits
please see the QuickSpecs at:
https://h18000.www1.hp.com/products/quickspecs/12327_div/12327_div.html
|
|
| ProLiant Essentials
Performance Management Pack |
|
ProLiant Essentials
Performance Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key, HP Management
CD and documentation.
NOTE: The most recent version of the software can always be downloaded
at https://www.hp.com/products/pmp. |
306696-B21
|
| NOTE:
For additional ProLiant Performance Management Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11925_div/11925_div.html
|
|
| ProLiant Essentials
Rapid Deployment Pack Windows Edition Release |
|
Rapid Deployment
Pack, Single-Server License
NOTE: This license allows 1 server to be deployed and managed via
RDP. |
267196-B21
|
Rapid Deployment
Pack, Single-Server License (Japan)
NOTE: This license allows 1 server to be deployed and managed via
RDP. |
267196-291
|
| NOTE:
For additional ProLiant Essentials Rapid Deployment Pack License Kits
please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.html
|
|
| ProLiant Essentials
Workload Management Pack |
|
| ProLiant Essentials
Workload Management Pack, Single Server License |
|
| NOTE:
For additional ProLiant Workload Management Pack License Kits please
see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/11452_div/11452_div.html
|
|
| ProLiant Essentials
Virtualization Management Software |
|
ProLiant Essentials
Virtual Machine Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation.
|
372214-B21
|
ProLiant
Essentials Server Migration Pack, Single-Migration License
NOTE: Contains one license, enabling 1 server migration, with a unique
license activation key and documentation.
NOTE: This license allows 1 server to be migrated from a physical
server to a virtual machine. Or this license can be used to migrate a virtual
machine from one virtualization layer i.e. VMware GSX to a different virtualization
layer such as VMware ESX or Microsoft Virtual Server 2005.
|
|
| NOTE:
For additional ProLiant Essentials Virtualization Management Software License
Kits please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.html
|
|
| ProLiant Essentials
Vulnerability and Patch Management Pack |
|
ProLiant Essentials
Vulnerability and Patch Management Pack, Single-Server License
NOTE: For use with a single server.
Contains one license with a unique license activation key and documentation. |
371645-B21
|
| NOTE:
For additional ProLiant Vulnerability and Patch Management Pack License
Kits, please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12111_div/12111_div.html
|
|
NOTE:
Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials. |
|
|
|
DL320 G3 Memory (DIMMs) |
1024 MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 1024 MB)
|
| | 512
MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 512 MB) |
|
|
|
Internal Storage
|
CD-ROM Drive Assembly Option
Kit |
|
| Floppy Drive Assembly Option kit |
372702-B21
|
| DVD-ROM Drive Assembly Option
Kit |
|
| HP DVD/CD RW Drive Option (ALL) |
377402-B21
|
| DL320 G3 Non Hot Plug U320 SCSI
Option Kit |
374282-B21
|
DL320 G3 SAS/SATA HDD Backplane
Option Kit
NOTE: When adding either SATA or
U320 SCSI drives to a non-hard drive DL320 G3 model, the appropriate option
kit above is required for operation. |
372704-B21
|
|
|
DL320 G3 Hard Drives | Ultra320
- Universal Non-Hot Plug | |
HP 72GB U320 10K NHP HDD
| 332751-B21 |
| HP 36GB U320 15K NHP HDD | 357012-B21 |
NOTE: All U320
Universal Hard Drives are backward compatible to U2 or U3 speeds. U320 drives
require an optional U320 Smart Array Controller or U320 SCSI HBA to support U320
transfer rates.
NOTE: Please see the Hard Drive QuickSpecs for Technical
Specifications such as capacity, height, width, interface, transfer rate, seek
time, physical configuration, and operating temperature:
https://h18000.www1.hp.com/products/quickspecs/11531_div/11531_div.html
(Worldwide)
| |
| Serial Attached SCSI - SAS | |
HP 146GB 3G SAS 15K 3.5" HDD
| 375872-B21 |
| HP 72GB 3G SAS 15K 3.5" HDD | 375870-B21 |
| HP 36GB 3G SAS 15K 3.5" HDD | 375868-B21 |
NOTE:
Please see the Hard Drive QuickSpecs for Technical Specifications such as capacity,
height, width, interface, transfer rate, seek time, physical configuration, and
operating temperature:
https://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.html
(Worldwide)
| |
| Serial ATA (SATA) | |
| HP 500GB 1.5G SATA 7.2K 3.5"
HDD | |
| HP 250GB 1.5G SATA 7.2K 3.5"
HDD | |
| HP 160GB 1.5G SATA 7.2K 3.5"
HDD | |
| HP 80GB 1.5G SATA 7.2K 3.5" HDD |
|
NOTE:
Please note that Serial ATA hot-plug capability and drive LEDs are not
supported by the DL320 G3 embedded SATA storage controller. The
purchase of the HP 8 Internal Port SAS HBA with RAID, the DL320 G3 SAS/SATA
HDD Backplane Option Kit, and the DL320 Hot Plug SAS/SATA Cable Option Kit
is required for Hot Plug and LED SAS/SATA support.
NOTE: SATA drives have a 1-year warranty. Please see the Hard Drive
QuickSpecs for Technical Specifications such as capacity, height, width,
interface, transfer rate, seek time, physical configuration, and operating
temperature:
https://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.html
(Worldwide)
|
|
|
|
Storage Controllers | 64-Bit/133-MHz
Single Channel Ultra320 SCSI HBA G2 |
| HP
8 Internal Port SAS HBA with RAID
NOTE:
The HP 8 int. Port SAS/SATA HBA with RAID requires the purchase of the SATA Rack
FIO model and the DL320 SAS/SATA Hot Plug Cable option kit ( 398307-B21).
| |
| Smart Array 6404/256 Controller |
| | Smart
Array 6402/128 Controller | | | 512MB
DDR BBWC Upgrade | |
| Smart Array 641 Controller |
| | Smart
Array 642 Controller | |
128MB BBWC for SA641/642
NOTE: This 128 MB BBWC supports the Smart
Array 641 Controller and Smart Array 642 Controller. |
| 64-Bit/133-MHz
Dual Channel Ultra320 SCSI Adapter
NOTE:
Supports Wide Ultra3, Ultra320 SCSI drives only. |
| |
NOTE: Please see the following
Controller or SCSI Adapter QuickSpecs for Technical Specifications such
as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI
Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache,
RAID support, and additional information:
https://h18000.www1.hp.com/products/quickspecs/11943_div/11943_div.html
(HP Single Channel Ultra320 SCSI HBA)
https://h18000.www1.hp.com/products/quickspecs/12332_div/12332_div.html
(HP 8 Internal Port SAS HBA)
https://h18000.www1.hp.com/products/quickspecs/12067_div/12067_div.html
(Smart Array 641)
https://h18000.www1.hp.com/products/quickspecs/12069_div/12069_div.html
(Smart Array 642)
https://h18000.www1.hp.com/products/quickspecs/10429_div/10429_div.html
(SCSI Adapter)
https://h18000.www1.hp.com/products/quickspecs/11555_div/11555_div.html
(U320 Adapter) |
|
|
|
Communications
|
HP NC150T PCI 4-port Gigabit 1000T
Combo Switch Adapter |
|
| HP NC310F PCI-X 1000SX Gigabit
Server Adapter |
|
| HP NC320T PCI Express 1000T Gigabit
Server Adapter |
|
| HP NC370F PCI-X Multifunction
1000SX Gigabit Server Adapter |
374193-B22
|
| HP NC370T PCI-X Multifunction
1000T Gigabit Server Adapter |
|
| HP NC373F PCI Express Multifunction
Gigabit Server Adapter |
|
| HP NC380T PCI Express Dual Port
Multifunction Gigabit Server Adapter |
|
| HP NC1020 PCI 1000T Gigabit Server
Adapter |
|
| HP NC7170 PCI-X Dual Port 1000T
Gigabit Server Adapter |
|
| HP NC7170 PCI-X Dual Port Low
Profile 1000T Gigabit Server Adapter |
|
| HP NC7771 PCI-X 1000T Gigabit
Server Adapter |
|
NOTE: A minimum
of 1 GB of memory per port is required for NC370x adapters, with a maximum
of two NC370x ports permitted in a server.
NOTE: Any NC61XX, NC71XX or NC77XX network adapter can be used for
redundancy with the embedded NC7782 network adapter. |
|
| HP NC570C PCI-X Dual-port 4x Fabric
Adapter |
376158-B21
|
| HP NC571C PCI Express Dual-port
4x Fabric Adapter |
376160-B21
|
| HP 24-Port 4x Fabric Copper Switch
|
376227-B21
|
| HP 4x Fabric 1m Copper Cable |
376232-B21
|
| HP 4x Fabric 3m Copper Cable |
376232-B22
|
| HP 4x Fabric 5m Copper Cable |
376232-B23
|
|
|
Tape Drives |
NOTE:
For the complete listing of Tape Drive offerings for this server, please visit:
https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For recommended tape drive offerings
for this ProLiant server see the following: | |
| USB Tape Drives | |
| HP StorageWorks DAT 40 USB External
Tape Drive (Carbonite) | DW023A |
| HP StorageWorks DAT 72 USB External
Tape Drive (Carbonite) | |
| External and Rack-Mount Ultrium
Tape Drives | |
HP StorageWorks Ultrium 232 Internal
Tape Drive (Carbonite)
NOTE: No internal
tape drives fit inside this HP ProLiant server. The internal drive shown here
is for the 1U and 3U Rack-mount Kit. |
| | HP
StorageWorks Ultrium 232 External Tape Drive (Carbonite) |
| | HP
StorageWorks Ultrium 448 External Tape Drive (Carbonite) |
DW017B | NOTE:
Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for additional options
such as controllers, media, and other related items:
https://h18006.www1.hp.com/products/quickspecs/11739_div/11739_div.html
(Worldwide)
For an up-to-date listing of the latest O/S and software support
details for HP Ultrium tape drives, please visit: https://www.hp.com/go/connect.
| |
| External, Rack-Mount, and
Array Module DAT Drives | |
| HP StorageWorks DAT 72 SCSI External
Tape Drive (Carbon) | Q1523B |
| HP StorageWorks 1U Rack-mount
kit with one DAT 72 (Carbon) |
A7443A | NOTE:
Please see the DAT Tape Drive QuickSpecs
for controllers, media, and other options:
https://h18000.www1.hp.com/products/quickspecs/11883_div/11883_div.html
(Worldwide)
https://h18006.www1.hp.com/products/quickspecs/12128_div/12128_div.html
(Worldwide)
For an up-to-date listing of the latest O/S and software support
details for HP DAT drives, please visit: https://www.hp.com/go/connect.
| | | Rack-Mount
Tape Drive Enclosures | |
HP
StorageWorks 1U Rack-Mount Kit
NOTE: The 1U Rack-mount Kit can
support up to (2) half-height tape drives and compatible with multiple Single-Ended
and LVD SCSI tape drives including the DAT 24, DAT 40, DAT 72, DLT VS80, DLT VS160,
Ultrium 215, Ultrium 232 and Ultrium 448 tape drives. |
| | HP
StorageWorks 1U USB Rack-Mount Kit |
| 1U
USB Cable Option Kit
NOTE: Converts
a 1U SCSI rack-mount kit to a USB interface to support the USB tape drives.
| |
NOTE:
Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional information
regarding these kits:
https://h18000.www1.hp.com/products/quickspecs/10854_div/10854_div.html
(Worldwide)
| |
|
|
| Tape
Libraries |
| HP StorageWorks MSL2024 Tape
Library | | | HP
StorageWorks MSL2024 1 Ultrium 960 Drive Library |
| | HP
StorageWorks MSL2024 1 Ultrium 448 Drive Library |
| | HP
StorageWorks MSL2024 2 Ultrium 448 Drive Library |
| | HP
StorageWorks MSL4048 Tape Library | | | HP
StorageWorks MSL4048 1 Ultrium 448 Drive Library | AG320A | | HP
StorageWorks MSL4048 2 Ultrium 448 Drive Library | AG321A | | HP
StorageWorks MSL4048 1 Ultrium 960 Drive Library | AG322A | | HP
StorageWorks MSL4048 2 Ultrium 960 Drive Library | |
| HP StorageWorks MSL6000 Tape
Library | |
| Ultrium 960 technology |
| | HP
StorageWorks MSL6030 1 Ultrium 960 Dr LVDS Library |
| | HP
StorageWorks MSL6030 1 Ultrium 960 Dr FC Library | AD608A |
| HP StorageWorks MSL6030 2 Ultrium
960 Dr LVDS Library |
| | HP
StorageWorks MSL6030 2 Ultrium 960 Dr FC Library | AD609A |
| Ultrium 460 technology |
| | HP
StorageWorks MSL6030 1 Ultrium 460 Dr LVDS Library |
| | HP
StorageWorks MSL6030 1 Ultrium 460 Dr FC Library |
| | HP
StorageWorks MSL6030 2 Ultrium 460 Dr LVDS Library |
| | HP
StorageWorks MSL6030 2 Ultrium 460 Dr FC Library |
| | NOTE:Please
reference the MSL2024, MSL4048 and MSL6000 Tape Library QuickSpecs at https://www.hp.com/go/automation
for additional information needed to create a complete solution; reference current
compatibility information at https://www.hp.com/go/ebs |
| |
|
|
HP Data Protector Express Software | HP
DP Express Backup Server Upgrade for ProLiant Software | BB117AP |
| HP DP Express Package for Microsoft
Small Business Server | BB118AA |
NOTE: Please
see the HP Data Protector Express QuickSpecs for additional information regarding
the purchase of HP Data Protector Express software:
https://h18000.www1.hp.com/products/quickspecs/12337_div/12337_div.html
(Worldwide) | |
|
|
HP StorageWorks Modular Smart Array 20 | HP
StorageWorks Modular Smart Array 20
NOTE:
Rack-mountable 12 (SATA) drive enclosure with U320 Host connectivity, redundant
power supplies. | |
HP StorageWorks Modular Smart
Array 20 Starter Kit
NOTE: Rack-mountable
12 (SATA) drive enclosure with U320 Host connectivity, redundant power supplies.
Includes Smart Array 6402/128 Controller. |
366172-B21 | | NOTE:
The Modular Smart Array Enclosure 20 Family supports the SATA 1.5Gb/s 3.5"
Hot Plug Hard Drives. | |
|
| HP
StorageWorks Modular Smart Array 30 | HP
StorageWorks Modular Smart Array 30 SB
NOTE:
Rack-mountable 14 drive enclosure with single bus, redundant power supplies |
302969-B21 | HP
StorageWorks Modular Smart Array 30 DB
NOTE:
Rack-mountable 14 drive enclosure with dual bus, redundant power supplies |
302970-B21 | | NOTE:
The Modular Smart Array Enclosure 30 Family supports the Wide Ultra3, Ultra320
Hot Plug Hard Drives. | |
|
| HP
StorageWorks Modular Smart Array 500 | HP
StorageWorks Modular Smart Array 500 Generation 2 |
335880-B21 | NOTE:
Please see the Modular Smart Array 500 Generation 2 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
https://h18000.www1.hp.com/products/quickspecs/11956_div/11956_div.html
(Worldwide)
| |
|
|
HP StorageWorks Modular Smart Array 1500 cs
|
Modular Smart Array 1500 Controller
Shelf
|
AA986A
|
NOTE: Please see
the StorageWorks Modular SAN Array 1500 cs QuickSpecs for additional options
and configuration information at:
https://www.hp.com/go/MSA1500cs |
|
|
|
StorageWorks Options
|
StorageWorks 2 Gb, 64-bit/133
MHz PCI-X-to-Fibre Channel Host Bus Adapter for Windows 2000, Windows Server
2003 and Linux
NOTE: FCA2214 2 Gb Fibre Channel
Host Bus Adapter is a single channel, 64-bit/133 MHz PCI-X-to Fibre Channel
Host Bus Adapter (HBA) with an embedded multi-mode optical interface.
|
|
FCA2408 - HP StorageWorks 2 Gb,
64-Bit/133 MHz Single Channel, PCI- X-to-Fibre Channel Host Bus Adapter
for Windows® 2000 and Windows Server® 2003
NOTE: FCA2408 HP StorageWorks 2 Gb, 133 MHz
PCI-X-to-Fibre Channel Host Bus Adapter (HBA) with optical
small-form-factor (SFF) (LC) interface.
|
343073-B21 |
FCA2404DC - HP StorageWorks 2
Gb, Dual Channel, 133 MHz PCI-X-to-Fibre Channel Host Bus Adapter for Windows
2000, and Windows Server 2003
NOTE: FCA2404DC HP StorageWorks 2 Gb Fibre Channel
Host Bus Adapter is a dual channel, 133 MHz, PCI-X to Fibre Channel Host
Bus Adapter (HBA) with an embedded multi-mode optical interface.
|
323264-B21 |
FCA2404 - StorageWorks 2 Gb, single
channel, 133 MHz PCI-X-to-Fibre Channel Host Bus Adapter for Windows 2000,
Windows NT and Windows Server 2003
NOTE: FCA2404 StorageWorks 2 Gb, Fibre Channel
Host Bus Adapter is a single channel, multi-path failover, 133 MHz, PCI-X
to Fibre Channel Host Bus Adapter (HBA) with an embedded multi-mode
optical interface for Proliant Server connects.
|
305573-B21 |
StorageWorks 2 Gb, Dual Port,
64-Bit/133 MHz PCI-X-to-Fibre Channel Host Bus Adapter for W2K, Windows
Server 2003 and Linux
NOTE: FCA2214DC StorageWorks 2 Gb
Dual Port, Fibre Channel Host Bus Adapter is a 64-bit/133 MHz, PCI-X-to
Fibre Channel Host Bus Adapter (HBA) with an embedded multi-mode optical
interface. |
321835-B21 |
|
|
Uninterruptible Power Systems – Rack UPS
|
HP UPS R5500
XR, (5000VA, 4500 Watt), High Voltage (NA/Jpn)
|
|
| HP UPS R5500 XR, (6000VA, 5400
Watt), High Voltage (Int'l) |
326529-B31
|
| HP UPS R1500 XR (1440VA, 1340
Watt), Low Voltage (NA) |
204404-001
|
|
HP UPS R1500 XR (1500VA, 1340 Watt), High Voltage (Int'l)
|
204404-B31
|
|
HP UPS R1500 XR (1500VA, 1340 Watt), Low Voltage (Japan)
|
204404-291
|
|
HP UPS R3000 XR (2880VA, 2700 Watt), Low Voltage (NA)
|
192186-001
|
|
HP UPS R3000 XR (3000VA, 2700 Watt), High Voltage (NA)
|
192186-002
|
|
HP UPS R3000 XR (2400VA, 2250 Watt), Low Voltage (Japan)
|
192186-291
|
| HP UPS R3000 XR (3000VA, 2700
Watt), High Voltage (Japan) |
192186-292
|
| HP UPS R3000 XR (3000VA, 2700
Watt), High Voltage (Int'l - detachable cord) |
192186-B31
|
| HP UPS R3000 XR (3000VA, 2700
Watt), High Voltage (16A IEC309 Plug) |
192186-B32
|
| HP UPS R3000 XR (3000VA, 2700
Watt), High Voltage (16A CEE 7/7 SCHUKO Plug) |
192186-B33
|
| HP UPS R3000 XR (3000VA, 2700
Watt), High Voltage (16A BS-546 Plug) |
192186-AR1
|
| HP UPS R5500 XR, (5000VA, 4500
Watt), High Voltage (NA/Jpn) |
|
| HP UPS R5500 XR, (6000VA, 5400
Watt), High Voltage (Int'l) |
326529-B31
|
HP
UPS R12000 XR, N+ x (12KVA, 12KW) High Voltage (WW)
NOTE: The UPS R12000 XR has a hardwired input and output connection.
|
207552-B22
|
|
| USB
Options |
USB Optical Scroll Mouse (Carbonite) |
DD441B |
| USB 1.44-MB External Diskette
Drive (Carbonite) |
DC141B |
| 256MB HP Drive Key II (USB 2.0) |
PH657A |
|
|
ProLiant DL320 Deployment Options
|
Rack Adapter Kit
NOTE: This kit allows HP rack servers
to fit in racks that are 24" wide. |
332815-B21 |
| NOTE: Telco Rack
Support - Support for all 2-post Telco racks requires the use of the standard
rack kit and an additional option kit from Rack Solutions: https://www.racksolutions.com/hp |
|
|
|
HP Rack 10000 G2 Series
(Carbon/Graphite Metallic)
|
10642 G2 (42U)
Rack Cabinet - Pallet
|
|
| 10642 G2 (42U)
Rack Cabinet - Shock Pallet
|
|
| 10642 G2 (42U)
Rack Cabinet - Crated
|
AF003A
|
| 10642 G2 (42U)
Rack Cabinet, with Extension - Shock Pallet
|
|
| 10642 G2 (42U)
Rack Cabinet, without door - Shock Pallet
|
AF005A
|
| 10642 G2 (42U)
Rack Cabinet - with Extension, without door - Shock Pallet
|
AF006A
|
| 10636 G2 (36U)
Rack Cabinet - Pallet
|
|
| 10636 G2 (36U)
Rack Cabinet - Shock Pallet
|
|
| 10636 G2 (36U)
Rack Cabinet - Crated
|
|
| 10636 G2 (36U)
Rack Cabinet , with Extension - Shock Pallet
|
|
| 10636 G2 (36U)
Rack Cabinet, without door - Shock Pallet
|
AF015A
|
| 10636 G2 (36U) Rack Cabinet, with
Extension, without door - Shock Pallet |
AF016A
|
| NOTE: It is mandatory to use a shock pallet when
shipping racks with equipment installed.
|
|
NOTE: Please see
the Rack 10000 G2 QuickSpecs for Technical Specifications such as height,
width, depth, weight, and color:
https://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
|
|
| NOTE: For additional
information regarding Rack Cabinets, please see the following URL: https://www.hp.com/go/rackandpower. |
|
|
|
HP Rack 10000 Series (Graphite Metallic) | 10642
(42U) Infrastructure Rack (Low Voltage) |
379006-001 | | 10642
(42U) Infrastructure Rack (High Voltage) |
| | HP
S10614 (14U) Rack Cabinet – Shock Pallet |
292302-B22 | |
HP 10842 (42U, 800mm wide) Rack Cabinet – Pallet |
257415-B21 | |
HP 10842 (42U, 800mm wide) Rack Cabinet – Shock Pallet |
257415-B22 | |
HP 10647 (47U) Rack Cabinet – Pallet |
245160-B21 | |
HP 10647 (47U) Rack Cabinet – Shock Pallet |
245160-B23 | |
HP 10642 (42U) Rack Cabinet – Pallet |
245161-B21 | | HP
10642 (42U) Rack Cabinet – Shock Pallet |
| | HP
10642 (42U) Rack Cabinet – Crated |
245161-B23 | | HP
10636 (36U) Rack Cabinet – Pallet |
| | HP
10636 (36U) Rack Cabinet – Shock Pallet |
| | HP
10636 (36U) Rack Cabinet – Crated |
245162-B23 | | HP
10622 (22U) Rack Cabinet – Pallet |
| | HP
10622 (22U) Rack Cabinet – Shock Pallet |
| | HP
10622 (22U) Rack Cabinet – Crated |
245163-B23 | | NOTE:
xxxxxx-B21 (pallet) used to ship empty racks shipped on a truck. -B22 (shock pallet)
used to ship racks with equipment installed (by custom systems, VARs and Channels).
xxxxxx-B23 (crated) used for air shipments of empty racks. | |
NOTE: Please
see the Rack 10000 QuickSpecs for Technical Specifications such as height, width,
depth, weight, and color:
https://h18000.www1.hp.com/products/quickspecs/10995_div/10995_div.html
(Worldwide)
| |
| NOTE: For additional
information regarding Rack Cabinets, please see the following URL: https://www.hp.com/go/rackandpower | |
|
|
Rack Options for HP
Rack 10000 Series
| TFT7210R
Rack Mounted 17" Monitor
NOTE:
For a complete list of Monitors please view the following URL:
https://www.hp.com/go/kvm | |
| TFT7600RKM US | |
| TFT7600RKM UK | AG053A |
| TFT7600RKM GR | AG054A |
| TFT7600RKM FR | AG055A | | TFT7600RKM
IT | AG056A | | TFT7600RKM
SP | AG057A | | TFT7600RKM
DEN | AG058A | | TFT7600RKM
NOR | AG059A | | TFT7600RKM
SE/FI | AG060A | | TFT7600RKM
SWI | AG061A | | TFT7600RKM
PORT | AG062A | | TFT7600RKM
BEL | AG063A | | TFT7600RKM
JPN2 | AG064A |
| TFT7600RKM RUS | AG065A |
| TFT7600RKM INTL | AG066A |
| 1U Rack Keyboard & Drawer
(Carbon) | 257054-xx1 |
| Country Code Key (for
1U Rack Keyboard & Drawer (PN 257054-xx1)) |
|
| XX
= 001 | US | XX
= 091 | Norway | | XX
= 031 | UK | XX
= 101 | Sweden/Finland |
| XX = 041 | Germany | XX
= 111 | Switzerland |
| XX = 051 | France | XX
= 131 | Portugal |
| XX = 061 | Italy | XX
= 181 | Belgium | | XX
= 071 | Spain | XX
= 291 | Japan | | XX
= 081 | Denmark | XX
= B31 | International |
| |
| NOTE: For additional
information regarding Rack Options, please see the following URL: https://www.hp.com/go/rackandpower |
|
|
|
HP KVM Switch Options
|
IP Console Switch Box (KVM/IP),
3 x 1 x 16 |
|
| IP Console Switch Box (KVM/IP),
1 x 1 x 16 |
|
| Server Console Switch (KVM), 0
x 1 x 8 port |
|
| Server Console Switch (KVM), 0
x 2 x 16 port |
|
| PS/2 Interface Adapter, 1 pack |
|
| PS/2 Interface Adapter, 8 pack |
|
| USB Interface Adapter, 1 pack |
|
| Serial Interface adapter - 1 Pack
with power supply |
|
| NOTE:
Cat5e cables are required to connect Interface Adapters to Console Switches.
Cat5e cables can be found at the following URL: https://www.hp.com/go/kvm.
|
|
| HP 1x 4 USB/PS2 KVM Switch, TT
(NA/JPN) |
371301-D71
|
| HP 1x 4 USB/PS2 KVM Switch, TT
(AU/NZ) |
371301-011
|
| HP 1x 4 USB/PS2 KVM Switch, TT
(UK) |
371301-031
|
| HP 1x 4 USB/PS2 KVM Switch, TT
(EU) |
371301-A21
|
| HP 1x 4 USB/PS2 KVM Switch, RM
(ALL) |
371302-B21
|
| HP PS2 KVM Cable with audio, 6',
2-pack |
371730-B21
|
| HP USB KVM Cable with audio, 6',
2-pack |
371729-B21
|
| NOTE:
For additional information regarding KVM switches, Serial Console servers,
rack mount monitors, keyboards and all related options please see the following
URL: https://www.hp.com/go/kvm.
|
|
|
|
HP Serial Console Server Options
|
HP 16 Port Serial Console Server
(worldwide) |
|
| HP 48 Port Serial Console Server
(worldwide) |
|
| Serial Adapter, RJ45-DB9 DCE Female,
1 Pack |
|
| Serial Adapter, RJ45-DB9 DCE Female,
8 Pack |
AF110A
|
| NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: https://www.hp.com/go/kvm.
|
|
| NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: https://www.hp.com/go/kvm. |
|
|
|
Service and Support Offerings (HP Care Pack Services)
|
Hardware Services On-site
Service |
|
| Next Business Day On-site Service,
5-Day x 9-Hour Coverage, 3 Years, Electronic |
U4479E
|
| 4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic |
U4480E
|
| 4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic |
U4481E
|
| 6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
U4482E
|
| Installation & Start-up
Services |
|
| Hardware Installation, Electronic |
U4490E
|
| Installation & Start-Up of
a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.
HP holidays, Electronic |
U4491E
|
| Support Plus |
|
| Onsite HW support, 8am-9pm, M-F,
4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion,
8am-9pm, M-F 2hr response time excl. HP holidays, Electronic |
U4492E
|
| Support Plus 24 |
|
| Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic |
U4493E
|
| Onsite HW support 24x7, 4hr response
and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic. |
U6309E
|
| Onsite HW support 24x7, 4hr response
and Red Hat ES Linux SW Tech support offsite, onsite at HP's discretion,
24x7 2hr response time incl. HP holidays, Electronic. |
U8331E
|
| NOTE: For more
information, customer/resellers can contact https://www.hp.com/hps/ |
|
Memory
|
HP ProLiant DL320 G3 All Models
|
| |
|
Standard Memory
512 MB PC3200 ECC DDR SDRAM installed (1 x 512 MB SDRAM DIMM) on Celeron
model; 1 GB (1 x 1024 MB SDRAM DIMMs) on all P4 models.
Standard Memory Plus Optional Memory
Up to 4096 MB memory is available with the optional installation of PC3200
ECC DDR SDRAM Memory kits.
|
| NOTE:
The chart below represents the P4 models with 1GB standard memory, and does
not represent all possible configurations. Memory can be populated in any
order with any of the supported DIMMs listed. For optimal performance, the
total amount of memory in slots 1A and 2A should equal to the total amount
of memory in slots 3B and 4B. |
|
DL320 G3 Memory
|
Slot
|
|
|
1A
|
2A
|
3B
|
4B
|
|
Standard
|
1024 MB
|
1024 MB
|
Empty
|
Empty
|
Empty
|
|
Optional
|
2048 MB
|
512 MB
|
512 MB
|
512 MB
|
512 MB
|
|
Maximum
|
4096 MB
|
1024 MB
|
1024 MB
|
1024 MB
|
1024 MB
|
|
Following are memory options available from HP:
|
|
- 1024 MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 1024
MB)
|
354563-B21
|
- 512 MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (1 x 512
MB)
|
354560-B21
|
Storage
 |
1- 2
|
Two
SATA or SCSI non-hot plug drive bays
|
|
A
|
Removable 1.44 MB Diskette Drive Assembly Kit
|
|
B
|
Optional CD-ROM/DVD Drive Assembly Kit
|
| |
|
|
Drive Support
|
| |
Quantity
Supported
|
Position
Supported
|
Controller
|
|
Removable Media
|
|
|
|
|
1.44-MB Diskette Drive
|
Up to 1
|
A
|
Integrated
|
| Low-profile IDE (ATAPI) CD-ROM
Drive |
Up to 1 |
B |
Integrated IDE (ATAPI) |
|
Low-profile IDE DVD-ROM Drive
|
Up to 1
|
B
|
Integrated IDE |
|
|
DL320 G3 Hard Drives
|
| Ultra320 SCSI Non-Hot
Plug Drives |
| |
Quantity
Supported
|
Position
Supported
|
Controller
|
36.4GB U320 15K
72.8GB U320 15K |
Up to 2
|
1-2
|
Smart Array 6402/128 Controller
Smart Array 6404/256 Controller
Smart Array 642 Controller
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
64-bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS
|
| SAS Drives |
| |
Quantity
Supported
|
Position
Supported
|
Controller |
36GB 3G SAS 15K
72GB 3G SAS 15K
146GB 3G SAS 15K
|
Up to 2 |
1-2 |
HP 8 Internal Port SAS HBA with
RAID |
|
| Serial ATA Drives |
| |
Quantity
Supported
|
Position
Supported
|
Controller
|
80GB 1.5G SATA 7.2K
160GB 1.5G SATA 7.2K
250GB 1.5G SATA 7.2K
500GB 1.5G SATA 7.2K
|
Up to 2
|
1-2 |
HP embedded 2 Port SATA Controller
with RAID 0/1 support |
|
|
External Storage
|
| |
Quantity
Supported
|
Position
Supported
|
Host Controller or Adapter
|
| |
Modular Smart Array 20 |
Please see the Modular Smart Array 20 QuickSpecs below
to determine configuration requirements
|
External
|
Please see the Modular Smart Array
20 QuickSpecs below see the list of supported controllers |
| |
Modular Smart Array 30 Family
|
Up to 14
|
External
|
Smart Array 6402/128 Controller
Smart Array 6404/256 Controller
Smart Array 642 Controller
64-Bit/133-MHz Dual Channel Ultra320 SCSI Adapter
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate OS |
| |
Modular Smart Array 500 G2 |
1
|
External
|
Please see the Modular Smart Array
500 QuickSpecs for the latest list of supported HBAs: https://www.hp.com/go/msa500 |
| |
Modular Smart Array 1000 |
Please see the Modular Smart Array 1000 QuickSpecs below
to determine configuration requirements
|
External
|
Please see the Modular Smart Array
1000 QuickSpecs (URL below) for the latest list of supported HBAs |
| |
Modular Smart Array 1000: https://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.html
(Worldwide) |
|
|
Maximum Storage Capacity - (Enclosure with SCSI models) |
| Internal | 145GB
(2 x 72GB SCSI) | | External | 4.20TB
(1 x (14 x 300GB Ultra320)) | |
Total | 4.35TB |
| NOTE:
In order to implement integrated SATA RAID with Smart Start 7.2, purchase
of floppy drive is required. |
|
| Maximum Storage
Capacity - (SATA Enclosure with SATA models) |
| Internal |
1TB (2 x 500GB SATA) |
| External |
6.00TB (1 x (12 x
500GB SATA Drives)) |
| Total |
7.00TB |
| NOTE:
In order to implement integrated SATA RAID with Smart Start 7.2, purchase
of floppy drive is required. |
| NOTE:
The External capacity section relates to the HP StorageWorks Modular Smart
Array 20. |
|
| Tape
Drives, Tape Autoloaders & Tape Libraries | |
NOTE: For an up-to-date listing of the latest
O/S Support details for each of the Tape Drives listed below, please see the following:
https://h18000.www1.hp.com/products/quickspecs/division/10233.html
(Worldwide) NOTE: For an up-to-date listing
of the latest O/S Support details for each of the Tape Autoloaders & Tape
Libraries listed below, please see the following:
https://h18000.www1.hp.com/products/quickspecs/division/10809.html
(Worldwide)
NOTE: For complete listing
of tape drive offerings see https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For details on connecting tape drives to this
server, see the following: | |
| Quantity
Supported
| Position
Supported
|
Controller | |
HP StorageWorks Tape Drives, USB External
DAT 24 USB
DAT 40
USB
DAT 72 USB | 1
per USB port | External | USB
port | | |
| | |
HP StorageWorks Tape Drives,
External
Ultrium 232
Ultrium 448
Ultrium 460
DAT 40
DAT
72
DLT VS80
DLT VS160
SDLT 320 |
Up to 2 |
External | 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320
SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate
OS | | |
| | |
HP StorageWorks Tape Drives,
External
Ultrium 960
SDLT 600 |
1 per SCSI Channel |
External | 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320
SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate
OS | | |
| | |
HP StorageWorks Autoloaders,
External
DAT 72x6 Tape Autoloader
1/8 Tape Autoloader |
1 autoloader per SCSI channel |
External | 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320
SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate
OS | | |
| | |
HP StorageWorks Rack-mount
Tape Drive Enclosures
1U Rack-Mount Kit
3U Rack-Mount Kit
5U Rack-Mount
Kit | 1 per
SCSI channel | External | 64-Bit/133MHz
Dual Channel Ultra320 SCSI Adapter
64-Bit/133-MHz Single Channel Ultra320
SCSI HBA G2
64-Bit/66-MHz Dual Channel Wide Ultra3 SCSI Adapter, Alternate
OS | | |
| | |
HP StorageWorks Tape Libraries,
External
MSL2024 (Ultrium
448 and 960-based)
MSL4048 (Ultrium 448 and 960-based)
MSL6000 (Ultrium
960 and 460-based)
MSL6000 (SDLT 600-based)
MSL5026S2 (SDLT 320-based)
MSL5052S2 (SDLT 320-based) |
Please reference the MSL Tape Library QuickSpecs to determine
configuration requirements |
External | Please
consult the EBS connectivity matrix at https://www.hp.com/go/ebs
for detailed connectivity information. |
Quickspecs
|
System Unit
|
Dimensions (HxWxD)
|
1.70 x 16.78 x 24.0 in (4.32 x 42.62 x 60.96 cm)
|
|
Weight (no drives installed)
|
24.0 lb (10.91 kg)
|
|
|
Weight (fully configured with two hard drives, four DIMM modules,
and a PCI expansion board)
|
27.0 lb (12.27 kg) |
|
|
Input Requirements
|
Range Line Voltage
|
90 to 264 VAC
|
|
Nominal Line Voltage
|
100 to 120 VAC/220 to 240 VAC
|
|
Rated Input Current
|
6 A (100 to120 VAC) to
3 A (200 to 240 VAC)
|
|
Rated Input Frequency
|
47 to 63 Hz
|
| Rated Input Power |
@ 115V input, Rated input power
= 486W (assume output wattage=350W)
@ 230V input, Rated input power = 479W (assume output wattage=350W) |
|
Power Supply Output
|
Steady State Power
|
350 W (rated)
NOTE:
1. +3.3V and +5V total O/P power 130W Maximum.
2. +3.3V,+5V and +12V total O/P power 324W Maximum.
|
| Environmental
Operating |
| Operating |
Ambient Temperature |
50° to 95° F (10°
to 35° C) |
|
Temperature Derating
|
1.8° F per 1000 ft to 10,000 ft
(1° C per 300 m to 3000 m)
|
|
Relative Humidity
|
10% to 90% (non-condensing)
|
|
Maximum wet bulb temperature
|
82° F (28° C)
|
| Non-operating Storage |
Temperature |
-22° to 140° F (-30 to
60° C) |
| Relative Humidity |
5% to 95% (non-condensing) |
| Maximum wet bulb temperature |
102° F (38.7° C) |
| Non-operating Shipping |
Temperature |
-22° to 140° F (-30 to
60° C) |
| Relative Humidity |
5% to 95% (non-condensing) |
| Maximum wet bulb temperature |
102° F (38.7° C) |
|
Acoustic Noise
|
Idle at 23 degree C ambient
(Fixed Disk Drives Spinning)
|
|
L WAd (BELS)
|
≤6.4
|
Bystander L pAm (dBA)
|
≤47
|
|
Operating
(Random Seeks to Fixed Disks)
|
|
L WAd (BELS)
|
≤6.4
|
Bystander L pAm (dBA)
|
≤47
|
|
|
Serial ATA Hard Drives
|
80 GB 7.2K
|
Capacity
|
80,000 MB |
| 349237-B21 |
Height |
1.028 in/2.611cm |
| Width |
4.0 in (10.16 cm) |
| Interface |
Serial ATA |
Transfer Rate Synchronous
(Maximum) |
1.5 Gb/s |
Seek Time
(typical reads, including settling) |
Single Track |
0.9 ms |
| Average |
9.0 ms |
| Full-Stroke |
17.0 ms |
| Rotational Speed |
7,200 rpm |
| Physical Configuration |
Bytes/Sector |
512 |
| |
Logical Blocks |
156,301,488 |
| Operating Temperature |
41° to 131° F (5°
to 55° C) |
|
|
|
|
|
Power Supply
|
Input voltage specifications
|
Rated input voltage
|
100 VAC to 240 VAC |
|
Input Specifications
|
Rated input line
|
90 VAC to 264VAC
|
|
Frequency range
|
47 to 63 Hz
|
|
Rated input power
|
@ 115V input, Rated input power = 486W (assume output wattage=350W
@ 230V input, Rated input power = 479W (assume output wattage=350W)
|
|
Rated input current
|
6 A, 3 A (110 V, 220 V)
|
|
Steady state power
|
350W (rated)
|
| BTU Rating |
1710 BTU/hr |
|
| Ambient temperature
range |
Operating |
50° to 118° F (10°
to 48° C) |
| Non-operating |
-40° to 158° F (-40°
to 70° C) |
|
Relative humidity
(non-condensing)
|
Operating
|
55% to 85% |
| Non-operating |
5% to 95% |
| Dielectric voltage
withstand |
Input to output |
1800 VAC/minute |
| Input to ground |
1800 VAC/minute |
| Maximum Wet Bulb Temperature |
41.3C |
|
|
|
Embedded NC7782 Dual Port NIC
|
Network Interface |
10Base-T/
100Base-TX/
1000Base-TX |
|
| Compatibility |
IEEE 802.3 10Base-T |
|
| |
IEEE 802.3ab 1000Base-T |
|
| |
IEEE 802.3u 100Base-TX |
|
| Data Transfer Method |
64-bit/100MHz PCIX |
|
| Network Transfer Rate |
10Base-T (Half-Duplex) |
10 Mb/s |
| |
10Base-T (Full-Duplex) |
20 Mb/s |
| |
100Base-TX (Half-Duplex) |
100 Mb/s |
| |
100Base-TX (Full-Duplex) |
200 Mb/s |
| |
1000Base-TX (Half and Full-Duplex)
|
2000Mb/s |
| Connector |
RJ-45 |
|
| Cable Support |
10Base-T |
Categories 3, 4 or 5 UTP; up to
328 ft (100 m) |
| |
10/100/1000Base-TX |
Category 5 UTP; up to 328 ft (100
m) |
|
|
Integrated Dual Channel Serial ATA Controller
|
Simultaneous drive transfer channels
|
2 channels |
| Transfer rate synchronous (maximum
theoretical) |
150 MB/s per channel; 300MB/s in RAID 0 pair |
Data transfer method
|
Intel® 82801FR Integrated
Serial ATA Host Controller (non-RAID mode)
Intel® 82801FR Integrated Serial ATA Host Controller (RAID Mode) |
Drive support
|
Serial ATA |
| Data transfer modes |
Legacy Mode
Combined Mode |
| Protocol |
Serial ATA |
| Feature |
NCQ (Native Command
Queuing);AHCI (Advanced Host Controller Interface) |
|
|
|
|
|
Integrated Serial ATA Controller
|
Transfer rate synchronous (maximum)
|
150 MB/s per channel;
300MB/s in RAID 0 pair |
Protocol
|
Serial ATA |
Drive support
|
HP Universal Serial
ATA |
Data transfer modes
|
ATA data-transfer modes
supported
SATA 1.0, SATA II
PIO modes 0-4
Multiword DMA modes 0-2
Ultra DMA modes 0-6 |
RAID levels
|
0, 1 |
Feature
|
Supports Pre-Failure
Warranty of SATA Hard Drives
Support for Systems Insight Manager
Supports multiple logical volumes
Setup through ROM based Array Configuration Utility
Installation scripting support |
OS Support
|
Microsoft Windows 2000
Server
Microsoft Windows Server 2003
Novell NetWare
Linux (Red Hat, SuSE, UnitedLinux) |
| |
NOTE: This controller
does not support LED functions
This controller does not support Hot Plug functions |
|
|
|
|
|
