• Support for SATA Hot Plug 3.5" Midline (MDL) Hard Drives
• Support for Smart Array Controller with BBWC

The new HP ProLiant DL185 G5 is a 2U, dual processor server designed for quality, performance, and flexible deployments to meet the needs of the emerging markets, SMB market, and Corporate scale out.

• Processors:
• Supports up to two Quad-Core AMD Opteron™ 2300 sequence processors
• DL185 G5 Memory:
• Supports up to 32 GB PC2-6400 DIMMs (DDR2-800) with Advanced ECC
• Supports up to 64 GB PC2-5300 DIMMs (DDR2-667) with Advanced ECC
• Internal Drive Support:
• Internal storage capacity (up to 14 hard drives via CTO or up to 12 hard drives via BTO)
  • 8 hard drive models:
    • SAS/SATA Capacity: Supports up to 16.0TB (8 x 2TB)
  • 12 hard drive models:
    • SAS/SATA Capacity: Supports up to 24.0TB (12 x 2TB)
  • Optional 14 drive support available with Rear 2 Hard Drive Kit
    NOTE: Available via CTO only
    • SAS/SATA Capacity: 24.0TB (14 x 2TB)
• Network Controller:
• o Embedded NC7782 Dual Port PCI-X 10/100/1000T Gigabit network adapter
• Storage Controllers:
• 8 hard drive models
  • HP Smart Array E200/128 BBWC Controller
• 12 hard drive models
  • HP Smart Array P400/256MB Controller
• Expansion Slots:
• Standard Riser: (1) x4 PCI-E (LP), (2) x8 PCI-E (FL/FH)
  • Option 1: (1) x4 PCI-E (LP), (2) 100MHz PCI-X 64-bit
  • Option 2: Rear DVD optional riser, (2) x8 PCI-e FL/FH slots (12HDD model only, replaces LP PCI-e slot)
  • Option 3: (1)x4 PCI-E (LP), Rear dual HDDs (12HDD model only, replaces all FL/FH PCI-e slots)
• Infrastructure Management:
  • HP ProLiant Lights Out 100i Remote Management support (IPMI 2.0 and SMASH support
  • Virtual Media plus Virtual KVM support with LO100i Advanced license
  • HP Insight Control for Linux, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple management console. Insight Control for Linux supports Linux-based central management servers.
• USB Ports:
• Five USB ports (2) up front, (2) rear, (1) internal (optional)
• Optical Drive:
• Support for one (optional): Multi-bay DVD
  • NOTE: For 12 hard drive models, optical drive support is available via rear DVD cage kit (P/N 513168-B21). DVD Drive not included.
• Optional Floppy (USB only, USB key)
• Power Supply:
• 750W Power Supply (Hot Plug, Autoswitching) ships standard
• High Efficiency 1200W Power Supply (Redundant Hot Plug, Autoswitching) (Optional) CSCI 2007/2008
• NOTE: Climate Savers Computing Initiative, 2007-2008 Listed Compliant)
• Form Factor:
• Rack (2U), (3.5 in/8.89 cm)
• Deployment/Serviceability:
• Tooled access to all system components for easy in rack serviceability
• Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
    NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support (3-1-1-in AP and Brazil) with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.

Memory
One of the following depending on Model

32 MB shared supporting 1600x1200x16M resolution

HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:

• LO100i Standard is embedded remote management and provides basic remote control via  telnet, browser, and IPMI 2.0 and SMASH
• LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console)

NOTE: Flexible and volume quantity (AKA) license kits are available for Lights-Out 100 Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products' QuickSpecs at this link for more information: https://h18004.www1.hp.com/products/servers/management/
remotemgmt.html

Embedded HP ProLiant Lights Out 100i Remote Management with upgrades to LO100i Advanced

One Highline IEC Power cord ships standard (for connection to a Power Distribution Unit)
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords that allow connection to 110V US wall outlets in a home or office. HP ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord If a user wishes to power a ProLiant DL server using a110V receptacle (NEMA-15), the NEMA power cord (AF556A) must be ordered separately.

If a local power cord is required, please reference the following power cord matrix: https://www.hp.com/go/powercordmatrix.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

HP ProLiant DL185 G5 servers have fixed rails which provide support for round or square mounting holes, including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 26" - 36".

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: https://www.hp.com/go/factory-express.

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. https://www.hp.com/products/configurator.

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service – Simplify ProLiant solution implementation, maintenance and management.

• Support Service – 3-Year 24x7 4 hr Response service support coverage
• Deployment Service – Hardware Installation only

Enhanced Service – Optimize service level to increase IT performance and availability

• Support Service - 3-Year 24x7 24 hr Call to repair service support coverage
• Support - 3-Year 24x7 6 hr Call to repair service support coverage
• Support Plus - 24x7 4 hr Response service support including OS coverage

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit: https://www.hp.com/services/proliantservices
https://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html

8 Hard Drive Models

HP DL185G5 2374HE 2GB, (1P), 8LFF
507339-xx1

HP DL185 G5 2380, 4GB, (1P), 8LFF
507404-xx1

HP DL185 G5 2376, 2GB (1P), 8LFF
504445-xx1

(1) Quad-Core AMD Opteron™ processor Model 2380 (2.5 GHz, 75W)
(1) Quad-Core AMD Opteron™ processor Model 2376 (2.3 GHz, 75W)
(1) Quad-Core AMD Opteron™ processor Model 2374HE (2.2 GHz, 55W)

Memory
One of the following depending on model

2 GB (2 x 1 GB) Registered PC2-6400 DDR2 DIMMs (800MHz) with Advanced ECC capabilities (2376 model)
4 GB (2 x 2 GB) Registered PC2-6400 DDR2 DIMMs (800MHz) with Advanced ECC capabilities (2376 and 2380 models)

8TB maximum

12 Hard Drive Models

HP DL185 G5 2376, 4GB (1P), 12LFF
507403-xx1

(1) Quad-Core AMD Opteron™ processor Model 2376 (2.3 GHz, W75)

12TB maximum

490833-B21

HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.

HP StorageWorks SAS Tape Drives, External
DAT 160 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
LTO-4 Ultrium 1760 SAS
LTO-4 Ultrium 1840 SAS
1U Rack-Mount Kit
3U Rack-Mount Kit

HP StorageWorks D2D Backup Systems
D2D120
D2D130
D2D2503i
D2D2504i
D2D4004i

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient

• Click on the system of interest. Example: DL185 G5
• Follow the instructions of the next screens.

System Inlet Temperature

Relative Humidity
(non-condensing)

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.