• Support for SATA Hot Plug 3.5" Midline (MDL) Solid State Drives
• Support for SAS Hot Plug 3.5" Enterprise (ENT) Hard Drives

Introducing the HP ProLiant DL165G5, now available with the latest high performance Opteron Quad Core processors, increased storage by 2X and a new high efficiency power supply option.

• Processors:
• Supports up to two AMD Opteron™ 2300 series Quad-Core processors
• Supports DirectConnect Architecture
• Supports Power Now
• Memory:
• 8 DIMM slots supporting up to 32GB REG PC2-6400 DDR2-800 MHz memory with Advanced ECC
• 8 DIMM slots supporting up to 64GB REG PC2-5300 DDR2-667 MHz memory with Advanced ECC
• Internal Drive Support:
  • Internal storage capacity:
    • SATA Capacity: Support for up to 4.0TB (4 x 1TB) with Hot Plug Model. 3.0TB (4 x 750GB) with Non Hot Plug Model
    • SAS Capacity: Support for up to 4.0 TB (4 x 1TB) with Hot Plug Model
      
    • NOTE: Installation of the Hot Plug Backplane 1U 2S Kit (445985-B21) is required if ordering third or fourth Hard Drives for Hot Plug models only.
• Network Controller:
• Embedded NC7782 dual-port gigabit server adapter
• Storage Controllers:
• Non-Hot Plug SATA Models: HP Embedded SATA Controller
  NOTE: Raid support requires optional slot based raid controller.
• Hot Plug SATA/SAS Models: HP SC40Ge SAS HBA with RAID 0,1
  NOTE: When using the SC40Ge with SATA Hard Drives, 1.5G SATA Hard Drives are required.
• Expansion Slots:
• Standard - PCI-Express assembly includes:
• Slot 1: full-length/full height PCI-Express x16
• Slot 2: half-length/low-profile PCI-Express x4 (x8 connector)
• Optional - PCI-X assembly includes:
• Slot 2: half-length/low-profile PCI-X 133 (note: PCI-X slots are 64 bits; 133 MHz capable)
• Optional - HTX assembly includes: Slot 1: full-length/full height HTX
• Infrastructure Management:
• HP ProLiant Lights Out 100i Remote Management support (IPMI 2.0 and SMASH support)
• Virtual Media plus Virtual KVM support with LO100i Advanced license
• HP Insight Control for Linux (IC-Linux), a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, control and optimize your IT infrastructure through a single, simple management console. HP Insight Control for Linux supports Linux-based servers and management consoles.
• USB Ports:
• Up to five USB ports (two front & two rear standard, 1 internal option)
• Optical Drive:
• Support for one (optional): DVD-ROM, DVD/CD RW
• Power Supply:
• 650W Power Supply standard (Non-Hot Plug, Autoswitching)
• 500W High Efficiency Power Supply optional (Non-Hot Plug, Autoswitching)
• Form Factor:
• Rack (1U)
• Fixed mounting rails included with all models
• Deployment/Serviceability:
• Tool-less access to all system components for easy in-rack serviceability
• Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for greater flexibility in performing defective parts replacement
• Warranty:
• This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
  NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

1

HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:

• LO100i Standard is embedded remote management and provides basic remote control via telnet, browser, and IPMI 2.0 and SMASH and comes standard on all DL100 series servers except for the DL180 G1 and G5 and the DL120 G5 servers.
• LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console).

NOTE: Flexible and volume quantity (AKA) license kits are available for the Lights-Out 100i Advanced Pack licenses as well as Electronic License To Use (E-LTU). AKA Tracking licenses require a 100 unit minimum forecast at initial contract signing. For these additional part numbers, please refer to each software products. QuickSpecs at this link for more information: www.hp.com/go/lo100

HP Insight Control for Linux, as a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. The Insight Control for Linux suite installs and license software modules that are integrated into HP System Insight Manager.

The HP Insight Control suite for Linux (IC-Linux) serves environments requiring a Linux-based management consoles. See www.hp.com/go/ic-linux

HP Insight Control suites include one year of 24 x 7 HP Software Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: https://www.hp.com/services/insight.

Embedded HP ProLiant Lights-Out 100i Remote Management, with licensable upgrades to Lights-Out 100i Advanced.

Microsoft Windows Server
Microsoft Windows Server 2008 Hyper V
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris 10 for x86/x64 based Systems
Citrix Essentials for XenServer (Retail)

Installation into Telco 2 post, and 4 post, or threaded holes racks requires a 3rd party option kit. For additional information, please visit: www.hp.com/go/rackandpower.

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to https://www.hp.com/go/factory-express.

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

• Support Service - 3-Year 24x7 4 hr Response service support coverage
• Deployment Service - Hardware Installation

Enhanced Service - Optimize service level to increase IT performance and availability

• Support Service - 3-Year 24x7 24 hr Call to repair service support coverage
• Support Service - 3-Year 24x7 6 hr Call to repair service support coverage
• Support Plus - 24x7 4 hr Response service support including OS coverage

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

HP DL165G5 2374HE 2.2 GHz, 2GB, Non-Hot Plug SATA (1P)
507554-001

HP DL165 G5 2346HE 1.8GHz, 2GB, Non-Hot Plug SATA (1P)
464207-001

HP DL165 G5 2352 2.1 GHz, 2GB, Non-Hot Plug SATA (1P)
445153-001

HP DL165G5 2356 2.3GHz, 4GB, Non-Hot Plug (1P)
445161-001

HP DL165G5 2380 2.5 GHz, 4GB, Hot Plug (1P)
507555-001

HP DL165G5 2346HE 1.8 GHz, 2GB, Hot Plug (1P)
464208-001

HP DL165 G5 2352 2.1 GHz, 2 GB Hot Plug SAS/SATA (1P)
445164-001

HP DL165G5 2356 2.3 GHz, 4 GB, Hot Plug (1P)
445162-001

(1) AMD Opteron™ processor Model 2380 (2.5 GHz, 75W ACP)
(1) AMD Opteron™ processor Model 2346HE (1.8 GHz, 55W ACP)
(1) AMD Opteron™ processor Model 2352 (2.1 GHz,75W ACP)
(1) AMD Opteron™ processor Model 2356 (2.3 GHz, 75W ACP)

S-Buy DL165G5 2376 250GB 2G SATA
536975-001

S-Buy DL165G5 2380 2P 4G Hot Plug
536976-001

Two available PCI-Express slots, including one full-length/full height and one low-profile/half height slot

AMD Opteron™ processor Model 2389 (2.9GHz, 75W ACP), FIO

AMD Opteron™ processor Model 2384 (2.7GHz, 75W ACP), FIO

HP StorageWorks DAT 160 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).

HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: Mounts inside the 1U SAS Rack-Mount Kit (AE459A).

HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage

HP StorageWorks 50 Modular Smart Array

Following are memory options available from HP:

1 GB REG PC2-5300 2 x 512 MB Single Rank Kit

2 GB REG PC2-5300 2 x 1 GB Single Rank Kit

Drive Support

DVD-ROM

Up to 1

A

Integrated IDE (ATAPI) (optional)

Up to 1

A

Integrated IDE (ATAPI) (optional)

Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.

HP StorageWorks SCSI Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit

HP StorageWorks USB Tape Drives, External
DAT 40 USB
DAT 72 USB
DAT 160 USB
DAT 320 USB
1U USB Rack-Mount Kit

HP StorageWorks SAS Tape Drives, External
DAT 320 SAS
DAT 160 SAS
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
LTO-4 Ultrium 1760 SAS
LTO-4 Ultrium 1840 SAS
1U Rack-Mount Kit
3U Rack-Mount Kit

HP SC44Ge Host Bus Adapter

HP StorageWorks SCSI Tape Automation, External
DAT 72x10 Autoloader 1/8 G2 Autoloader
MSL2024
MSL4048

HP StorageWorks SAS Tape Automation, External
1/8 G2 Autoloader
MSL2024
MSL4048

HP StorageWorks Fibre Tape Automation, External
MSL2024
MSL4048
MSL8096

HP StorageWorks D2D Backup Systems
D2D120
D2D130
D2D2503i
D2D2504i
D2D4004i

50 Modular Smart Array

Up to 4

External

HP Smart Array E500/256MB Controller

Up to 4

External

HP Smart Array E500/256MB Controller

One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL servers no longer ship standard with NEMA power cords (163719-002) that allow connection to 110V wall outlets in a home or office. HP ProLiant DL servers are primarily connected to PDU's in data center racks so they now ship standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate cord. Please see the following power cord matrix: https://www.hp.com/go/powercordmatrix.

100-127 VAC,
200-240 VAC

10.0 A (at 115 VAC),
5.5 A (at 230 VAC)

852.16 W (at 100 VAC),
805.03W (at 200 VAC)

2217.89 BTU/hr (at 100 VAC),
2217.89 BTU/hr (at 200 VAC)

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient

- Click on the system of interest. Example: DL165 G5
- Follow the instructions of the next screens.

650 W (at 100 VAC),
650 W (at 200 VAC)

700 W (at 100 VAC),
700 W (at 200 VAC)

Input Requirements
(per power supply)

90-132 VAC,
200-240 VAC

9.4 A (at 115 VAC),
7.8 A (at 230 VAC)

1075 W (at 100 VAC),
1375W (at 200 VAC)

3070.93 BTU/hr (at 100 VAC),
4094.57 BTU/hr (at 200 VAC)

Power Specifications

To review typical system power ratings use the Power Advisor which is available via the online tool located at URL: www.hp.com/go/proliant-energy-efficient

- Click on the system of interest. Example: DL165 G5
- Follow the instructions of the next screens.

900 W (at 100 VAC),
1200 W (at 200 VAC)

900 W (at 100 VAC),
1200 W (at 200 VAC)

10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr).  The upper limit may be limited by the type and number of options installed. 
System performance may be reduced if operating with a fan fault or above 30°C (86°F).

10Base-T/
100Base-TX/
1000Base-TX

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.