|
DL QuickSpecs
|
DL20
|
|
DL60
|
|
DL80
|
|
DL120
|
|
DL140
|
|
DL145
|
|
DL160
|
|
DL160se
|
|
DL165
|
|
DL180
|
|
DL185
|
|
DL320
|
|
DL325
|
|
DL345
|
|
DL360
|
|
DL365
|
|
DL380
|
|
DL385
|
|
DL388
|
|
DL560
|
|
DL580
|
|
DL585
|
|
DL740
|
|
DL760
|
|
DL785
|
|
DL1000
|
|
|
ML QuickSpecs
|
ML30
|
|
ML110
|
|
ML115
|
|
ML150
|
|
ML310
|
|
ML330
|
|
ML350
|
|
ML370
|
|
ML530
|
|
ML570
|
|
ML750
|
|
|
BL QuickSpecs
|
BL10e
|
|
BL20p
|
|
BL25p
|
|
BL260c
|
|
BL280c
|
|
BL2x220c
|
|
BL30p
|
|
BL35p
|
|
BL40p
|
|
BL420c
|
|
BL45p
|
|
BL460c
|
|
BL465c
|
|
BL480c
|
|
BL495c
|
|
BL60p
|
|
BL620c
|
|
BL660c
|
|
BL680c
|
|
BL685c
|
|
BL860c
|
|
|
SL QuickSpecs
|
SL160z
|
|
SL165z
|
|
SL170s
|
|
SL170z
|
|
SL230s
|
|
SL250s
|
|
SL270s
|
|
SL2x170z
|
|
SL335s
|
|
SL390s
|
|
SL4540
|
|
SL4545
|
|
|
XL QuickSpecs
|
XL170r
|
|
XL190r
|
|
XL220a
|
|
XL230a
|
|
XL730f
|
|
XL740f
|
|
XL750f
|
|
|
CL QuickSpecs
|
CL1850
|
CL1850 G1
| |
CL380
|
CL380 G1
| |
|
|
|
|
|
|
|
Proliant DL160se G6 QuickSpecs |
US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant DL160se G6 Overview
HP ProLiant DL160se Generation 6 (G6)
|
The HP ProLiant DL160se G6 server
is a high performance, low cost, ultra-dense, dual processor capable, 1U
rack server for I/O intense High Performance Computing (HPC) environments,
Web 2.0, hosting, and general heterogeneous server deployments requiring
multiple PCI-e card attach. |
Hot Plug SAS/SATA and Non-Hot
Plug SATA Models |

|
 |
Proliant DL160se G6 Front View: |
Proliant DL160se G6 Rear View: |
1. |
Access panel |
1. |
Power Supply Cable Socket |
2. |
System fans |
2. |
Video Port |
3. |
Two USB ports |
3. |
Serial Port |
4. |
Power on/off & system LEDs |
4. |
Rear USB ports (2) |
5. |
Optional 3rd and 4th
3.5" Non-Hot plug SATA or hot plug SAS/SATA hard drive bays |
5. |
One GbE LAN ports for NIC 2 (RJ-45) |
6. |
Optional DVD-RW or DVD-ROM drive |
6. |
Optional LO100i 10/100 Mbps LAN port for
IPMI management (RJ-45) |
7. |
Standard 1st and 2nd 3.5"
Non-Hot plug SATA or hot plug SAS/SATA hard drive bays |
7. |
Low-Profile x16 PCI-Express Gen2 slot |
8. |
Full-height PCI-Express x16 |
8. |
Twelve DIMM slots: DDR3 Registered (RDIMM)
or Unbuffered (UDIMM) memory |
9. |
UID - Rear Unit Identification LED |
9. |
Expansion Slots:
Non-Hot Plug Models - One full-length/full height x16 PCI-Express Gen2 slot
and One Low Profile x16 PCI-Express Gen2 slot
Hot Plug Models - One available Full-length/full height x16 PCI-Express
Gen2 slot, Low Profile PCI-Express Gen2 slot (used for storage controller) |
10. |
One GbE LAN ports for NIC 1 (RJ-45) |
10. |
Quad-Core Intel® Xeon® 5500 series
processors (supports up to two) |
11. |
Power supply (500 Watts - standard, other
PS options available) |
|
What's New |
- Support for 600GB and 450 GB SAS SFF Enterprise Hard Drives
- Support for 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered
CAS-9 Memory Kit
|
Standard Features
NOTE: For the
Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information - Factory Integrated Models"
section. |
Processor
One of the following depending on Model |
Intel® Xeon® Processor
X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
Intel® Xeon® Processor
X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
Intel® Xeon® Processor
X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
Intel® Xeon® Processor
E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
Intel® Xeon® Processor
E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
Intel® Xeon® Processor
E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
Intel® Xeon® Processor
L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
Intel® Xeon® Processor
E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: Available through Configure
To Order only. See Factory Integration Models section for more details. |
NOTE: HT indicates
that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number
indicates the performance/wattage of the processor. "X" denotes
High Performance/Wattage; "E" denotes Enterprise Performance/Wattage
(Mainstream); and "L" denotes Lower Wattage.
NOTE: Supports up to two Intel® Quad-Core 5500 sequence processors. |
|
Cache Memory |
4 MB Level 3 cache (E5504) |
8 MB Level 3 cache (standard) |
|
Chipset |
Intel® 5520 Chipset |
|
Upgradeability |
Upgradeable to two processors |
|
Memory Protection |
Advanced memory protection |
|
Memory |
Type |
DDR3 Registered
(RDIMM) or Unbuffered (UDIMM) |
DIMM Slots |
Total 12 DIMM slots |
Standard |
4 GB |
(2 x 2 GB) UDIMMs |
6 GB |
(3 x 2 GB) UDIMMs |
12 GB |
(6 x 2 GB) RDIMMs |
Maximum (RDIMM) |
192 GB |
(12 x 16 GB) |
Maximum (UDIMM) |
48 GB |
(12 x 4 GB) |
NOTE:
Depending on the memory configuration and processor model, the memory speed
may run at 1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration
Tool at: www.hp.com/go/ddr3memory-configurator. |
|
Network Controller |
HP NC362i Integrated Dual Port
Gigabit Server Adapter |
|
Expansion Slots # |
Technology
|
Bus Width
|
Connector Width*
|
Bus Number*
|
Device No.**
|
Form Factor
|
Notes
|
1 |
PCI-Express 2.0
|
x16
|
x16
|
1
|
0
|
Full length, full height
|
3.3 volts
|
1 |
PCI-X*** |
64-bit |
N/A |
5 |
1 |
Full length, full
height |
3.3 volts |
2 |
PCI-Express 2.0
|
x16
|
x16
|
6 |
3 |
Low Profile
|
3.3 volts
|
|
NOTE:
All slots can accept universal keyed PCI cards |
* Default
bus assignment. Inserting cards with PCI bridges may alter the actual bus
assignment number. |
** Slots
are enumerated differently based on OS. MS OS's enumerate from lowest to
highest Device ID by bus (starting with the lowest bus). |
*** PCI-X
bus speed will be 133MHz when only one PCI-X card is installed. It will
be 100MHz when both slots have PCI-X cards installed. |
|
Storage
Controller | Non-Hot
Plug SATA Models | HP Embedded
SATA RAID Controller (integrated into the south-bridge) NOTE:
Transfer rate: up to 3 Gb/s SATA | HP
Smart Array B110i SATA RAID supporting SW RAID 0,1,10 NOTE:
To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA Raid controller,
To enable use of the B110i, enter the ROM based setup utility(RBSU). The option
for enabling RAID can be found in the Advanced section of the RBSU. |
Hot Plug SATA/SAS Models |
HP Smart Array P212 RAID Controller
(RAID 0/1/1+0)
HP Smart Array P212 Controller 256 BBWC (RAID/0/1/1+0/5/5+0)
NOTE: Transfer rate: up to 3 Gb/s
SATA, up to 3 Gb/s SAS. |
NOTE:
A diskette drive or virtual FDD using LO100 Advanced Pack is needed to install
storage controller drivers during a Windows operating system installation
from a CD.
NOTE: Addition of the battery backed cache upgrade enables BBWC,
RAID 5, 5+0, array expansion, logical drive extension, RAID migration, and
stripe size migration.
NOTE: RAID 6 functionality requires the addition of Smart Array Advanced
Pack (P/N: 516471-B21).
NOTE: The addition of a Smart Array hardware based storage controller
to a Non-Hot Plug SATA Model is only supported for external storage. |
|
Internal Storage
Devices |
Diskette
Drives
| Via USB only | Optical
Drives | Optional HP 9.5mm SATA
DVD-ROM Optical Drive | Optional
HP 9.5mm SATA DVD RW Optical Drive | Drive
Bays | Up to 4 Non-hot plug SATA
3.5" drives |
Up to 4 Hot plug SAS/SATA 3.5"
drives |
|
Maximum Internal
Storage |
Non-Hot Plug SATA |
8.0TB |
4 x 2TB |
Hot Plug SATA |
8.0TB |
4 x 2TB |
Hot Plug SAS |
8.0TB |
4 x 2TB |
Hot Plug SFF SAS |
4.8 TB |
8 x 600GB |
Hot Plug SFF SATA |
4.0 TB |
8 x 500GB |
NOTE:
Installation of the Hot Plug Backplane 1U 2S Kit (512181-B21) is required
if ordering third or fourth Hard Drives for Hot Plug models only. |
NOTE:
Installation of the Hot Plug 8 Small Form Factor HDD Cage & Backplane
G6 FIO (515938-B21) is required if ordering small form factor hard drives
for Hot Plug models only. |
|
Interfaces |
Parallel |
None |
Network RJ-45(Ethernet) |
2 10/100/1000 NIC ports (plus
1 optional dedicated port for the HP ProLiant Lights Out 100i Remote Management) |
Serial |
1 |
Pointing Device (Mouse) |
0 (via USB only) |
Graphics |
1 |
Keyboard |
0 (via USB only) |
USB |
5 (two front, one internal,
two rear)
NOTE: In order to connect a USB device
internally, the internal USB Cable G6 Kit must be used (P/N 536769-B21)
NOTE: Please see the following URL for additional information regarding
USB support:
https://h18004.www1.hp.com/products/servers/platforms/usb-support.html. |
|
Industry Standard
Compliance |
ACPI V2.0 Compliant |
PCI 2.2 Compliant |
PXE Support |
WOL Support |
Microsoft® Logo certifications |
IPMI 2.0, SMASH CLP compliant |
|
Server Power Cords |
One 6' Highline (IEC-IEC) power
cord ships standard
NOTE: HP ProLiant DL servers no longer
ship standard with NEMA power cords (163719-002) that allow connection to
110V wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only
a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server
using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must
be ordered separately.
If customers require a power cord, they can check the power cord matrix
for the appropriate cord. Please see the following power cord matrix: https://www.hp.com/go/powercordmatrix. |
|
Power
Supply | 500 Watts, auto-switching,
high efficiency, PFC (Power Factor Correcting) |
NOTE: Factory
upgradeable to high-efficiency (HE) hot plug common slot redundant power
supply. |
|
System
Fans | 5 system fans ship standard;
Non-hot plug, Non-redundant | NOTE:
The HP Redundant Fan 40x56 1U seG6 Kit (P/N 536576-B21) can be ordered as
a factory upgrade for N+1 fan redundancy. |
|
Graphics |
32MB shared supporting all display resolutions up to 1600x1200 16bpp@75Hz
NOTE: 8MB is dedicated to video
memory.
|
|
Form Factor |
Rack (1U), (1.75 in/4.45 cm) |
|
Embedded Manageability |
HP LO100i
|
HP LO100i Advanced Licenses for Virtual KVM and Virtual Media.
Features:
- Embedded IPMI standard reporting
- System event log access
- Remote Serial console (serial redirection)
- Browser, Telnet access
- SMASH-CLP compliant
- IPMI 2.0 compliant
- Secure Socket Layer (SSL) Encryption
- Secure Shell (SSH) Encryption
- Virtual media (Floppy, CD, USB 2.0) with Advanced License
- Virtual Keyboard, Video, Mouse (KVM) for graphical remote console
with Advanced License
NOTE: Flexible and volume quantity (AKA)
license kits are available for the Lights-Out 100i Advanced Pack licenses
as well as Electronic License To Use (E-LTU). AKA Tracking licenses require
a 100 unit minimum forecast at initial contract signing. For these additional
part numbers, please refer to each software products. QuickSpecs at this
link for more information: www.hp.com/go/lo100.
|
|
Security |
Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH) |
|
Warranty |
This product is covered by a global limited warranty and supported by
HP Services and a worldwide network of HP Authorized Channel Partners.
Hardware diagnostic support and parts replacement is available for three
years from date of purchase. Support for software and initial setup is
available for 90 days from date of purchase. Enhancements to warranty
services are available through HP Care Pack services or customized service
agreements. Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
NOTE: Server Warranty includes
3 year Next Day Parts replacement, 0-Years Labor, 0-Years Onsite support.
Additional information regarding worldwide limited warranty and technical
support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
|
Optional Features
Core Infrastructure Management |
HP Insight Control for Linux |
HP Insight Control for Linux,
as a product option, delivers essential infrastructure management that can
help save time and money by making it easy to deploy, monitor, remote control,
and optimize your IT infrastructure through a single, simple management
console. The Insight Control for Linux suite installs and license software
modules that are integrated into HP System Insight Manager.
The HP Insight Control suite for Linux (IC-Linux) serves environments requiring
a Linux-based management consoles. See:
www.hp.com/go/ic-linux
HP Insight Control suites include one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: https://www.hp.com/services/insight. |
|
High Performance
Clusters |
HP Cluster Platforms |
HP Cluster Platforms are specifically
engineered, factory-integrated large-scale ProLiant clusters optimized for
High Performance Computing, with a choice of servers, networks and software.
Operating system options include specially priced offerings for Red Hat
Enterprise Linux and Novell SLES, as well as Microsoft Windows HPC Server.
A Cluster Platform Configurator simplifies ordering. https://www.hp.com/go/clusters |
HP HPC Interconnects |
High Performance Computing (HPC)
interconnect technologies are available for this server as part of the HP
Cluster Platform portfolio. These high-speed InfiniBand and Gigabit interconnects
are fully supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
https://www.hp.com/techservers/clusters/ucp/index.html |
HP Cluster Management Utility |
HP Cluster Management Utility
(CMU) is an HP-licensed and HP-supported suite of tools that are used to
manage large-scale Linux ProLiant systems. CMU includes software for the
centralized provisioning, management and monitoring of nodes. CMU makes
the administration of clusters user friendly, efficient, and effective.
https://www.hp.com/go/cmu |
HP HPC Linux Value Pack |
HP HPC Linux Value Pack (Value
Pack) is an HP-licensed and HP-supported specially priced software bundle
for the development and deployment of applications on HPC Cluster Platforms.
Value Pack includes the Platform LSF workload scheduler, the HP-MPI parallelization
library, the HP Unified Parallel C compiler and the HP Shmem library, as
well as the execution environments for the libraries and compiler. HP
HPC Linux Value Pack |
|
Factory Express Portfolio for
Servers and Storage |
HP Factory Express offers configuration, customization, integration and
deployment services for HP servers and storage products. Customers can
choose how their factory solutions are built, tested, integrated, shipped
and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades,
HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP,
rackable tape libraries and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: https://www.hp.com/go/factory-express.
| |
HP Enterprise Configurator |
The HP eConfigure Enterprise
Configurator now provides factory default racking for our HP hardware portfolio.
This approach is aligned with our strategic direction to meet the needs
and expectations of our valued customers. If you require "custom"
rack configuration, please contact HP's Customer Business Center or an Authorized
Partner for assistance. https://www.hp.com/products/configurator. |
Service and Support
Service and Support |
HP Care Pack Services: Packaged server and storage services for increased
uptime, productivity and ROI
When you buy HP server and storage products and solutions, it's also a
good time to think about what levels of support you may need. Our portfolio
of service options reduce deployment and management worries while helping
you get the most out of your server and storage investments. We take a
holistic approach to your environment, bridging servers, blades, storage,
software and network infrastructures with our packaged HP Care Pack Services
for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment
warranties have matured along with technology. Good news that can also
create problems stemming from depending on standard warranties designed
to only protect against product defects and some downtime causes. Using
a standard approach to warranty uplifts, such as HP Care Pack Services,
helps reduce downtime risks and provides operational consistency for mission-critical
and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and
storage warranties cost effectively
HP Care Pack Services offer a standard reactive hardware and software
support services suite sold separately, or combined with our Support Plus
and Support Plus 24 services. The portfolio also provides a combination
of integrated proactive and reactive services, such as Proactive 24 Service
and Critical Service. In addition with HP Proactive Select, you can acquire
the specific proactive constancy and technical services. HP Proactive
Select menu offers a broad set of service options that you can mix and
match depending on your specific requirements. Proactive service options
include offers for server, storage, network, SAN device, software, environment
and education services.
HP server and storage lifecycle support services offers a full spectrum
of customer care-from technology support to complex migrations to complete
managed services. HP Factory Express provides customization, integration
and deployment services for turnkey solutions. HP Education Services offer
flexible, comprehensive training on to help your IT staff get the most
out of your server and storage investments. HP Financial solutions extend
innovative financing and cost-effective asset management programs-from
purchase to equipment retirement.
Learn more: www.hp.com/services/servers
and www.hp.com/services/storage
NOTE: Care Pack Services availability
may vary by product and country.
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
- Services for customers purchasing from HP or an enterprise reseller
are quoted using HP order configuration tools.
- Customers purchasing from a commercial reseller can find HP Care Pack
Services at https://www.hp.com/go/lookuptool
|
|
Recommended HP
Care Pack Services for optimal satisfaction with your HP product |
Recommended Services |
3-Year HP Hardware Support Onsite Service, 4-hour response, 13x5
Delivers increased equipment availability and productivity with rapid
remote support and onsite response for your HP server and storage hardware.
- Help improve or maintain system uptime
- Convenient onsite support
- Committed response time
https://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
|
|
3-Year HP Hardware Support Onsite Service, next-day response, 9x5
Provides high-quality remote assistance and onsite support for your covered
hardware if required, helping you to improve product uptime.
- Help improve or maintain system uptime
- Convenient onsite support
- Reliable response time
https://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
|
|
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage
devices and networking options to assist you in bringing your new hardware
into operation in a timely and professional manner.
- Expedited installation, with all service prerequisites met before
the installation is performed
- Installation in accordance with manufacturer's specifications, enhancing
the supportability of your HP-installed hardware and software
- Service delivery at a mutually scheduled time
- Allows your IT resources to stay focused on their core tasks and priorities
- Availability of an HP service specialist to answer questions during
the onsite delivery of this service
https://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
|
|
Optional HP Care
Pack Services that will enhance your HP product experience |
Optional Services |
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
As an alternative to our recommended support level, for customers who
need same day response service level 24x7.
Provides you with rapid remote support and if required an HP authorized
representative who will arrive on site any time and day of the year to
begin hardware maintenance service within 4 hours of the service request
being logged.
https://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE
|
|
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6-
or 24-hour
As an alternative to our recommended support level, for customers who
need committed call-to-repair for server hardware.
Provides your IT manager with a team of support specialists who will quickly
begin troubleshooting the system to help return the hardware to operating
condition within 6 or 24 hours of the initial service request to the HP
Global Solution Center.
https://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
|
|
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services
and education courses
Provides a flexible way to purchase HP best-in-class consultancy and technical
services. You can buy Proactive Select Service Credits when you purchase
your hardware and then use the credits over the next 12 months.
https://h20195.www2.hp.com/V2/GetPDF.aspx/4AA2-3842ENN
|
|
eSupport |
HP eSupport is a portfolio of technology-based services that assist you
with managing your business environment - from the desktop to the data
center.
Support Portal
The HP support portal provides one-stop access to the information, tools
and services you need to manage the daily operations of your IT environment.
Features include:
- Access to self-solve tools (including search technical knowledge base)
- Efficient logging and tracking of support cases
- Collaboration with other business and IT professionals
- Download of patches and drivers
- Access to diagnostic tools
- Proactive notification of relevant information
Access to certain features of the support portal requires an HP service
agreement. To access the support portal, visit: https://www.hp.com/support
HP Insight Remote Support software delivers secure remote support for
your HP Servers and Storage, 24 X 7, so you can spend less time solving
problems and more time focused on your business. You can have your systems
remotely monitored for hardware failure using secure technology that's
been proven at thousands of companies around the world. In many cases,
you can avoid problems before they occur.
|
|
Customer Technical Training |
In today's cost-conscious business environment, IT professionals, developers,
consultants and users face an interesting challenge: how to keep up with
the latest technologies and expand important skills while delivering profitable
results on current projects. To help address this challenge, HP offers
innovative training solutions that help keep you up-to-date on virtualization,
server, storage, Insight Control, Citrix, Microsoft® and open source/Linux-related
topics-while spending less time away from business-critical activities.
|
|
HP Services Awards |
HP Technology Services continues to be recognized for service and support
excellence by customers, partners, industry organizations and publications
around the world. Recent honors and award reflect our services team's
dedications, technical expertise, professionalism and uncompromising commitment
to customer satisfaction.
|
|
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory
Integrated Model. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative
for additional information. NOTE: Configure-to-order servers must start
with a CTO Chassis. NOTE: FIO indicates that this option is a Factory
Installable Option. | Step
1: Base Configuration (choose one of the following configurable models) |
HP
Models |
Non-Hot Plug SATA
Model
NOTE: Non-Hot Plug models are not
upgradeable to Hot Plug.
NOTE: The addition of a Smart Array controller is supported for external
storage use only. |
|
HP ProLiant DL160se
G6 Non-hot Plug Configure-to-order Rack Server |
495958-B21 |
Factory Integrated
Model ships with: | |
HP NC362i Integrated
Dual Port Gigabit Server Adapter | |
One available full-length/full-height
PCI-Express x16 Generation 2 slot
One available Low Profile PCI-Express x16 Generation 2 slot |
|
One Highline IEC
Power Cord | |
5 Non-Hot Plug Fans | |
Rack (1U), (1.75
in / 4.45 cm) | |
Tool-less Fixed
Rails | |
Hot Plug Model | |
HP ProLiant DL160se
G6 Hot Plug Configure-to-order Rack Server |
495959-B21 |
Factory Integrated
Model ships with: | |
HP NC362i Integrated
Dual Port Gigabit Server Adapter | |
One available PCI-Express
Generation 2 slot: Slot 1: full-length/full-height
Slot 2: low-profile occupied by controller card |
|
One Highline IEC
Power Cord | |
5 Non-Hot Plug Fans | |
Rack (1U), (1.75
in / 4.45 cm) | |
Tool-less Fixed
Rails | |
|
Step
2: Choose Required Options (only one of the following from each list unless
otherwise noted) |
HP
Processors |
Quad-Core Processors
NOTE: If 2 processors are desired,
select one xxxxxx-B21 and one xxxxxx-B21. |
|
HP DL160 G6 Intel®
Xeon® X5570 (2.93GHz/4-core/8MB/95W) FIO Processor Kit |
508231-B21 |
HP DL160 G6 Intel®
Xeon® X5560 (2.80GHz/4-core/8MB/95W) FIO Processor Kit |
573893-B21 |
HP DL160 G6 Intel®
Xeon® X5550 (2.66GHz/4-core/8MB/95W) FIO Processor Kit |
491511-B21
|
HP DL160 G6 Intel®
Xeon® E5540 (2.53GHz/4-core/8MB/80W) FIO Processor Kit |
490461-B21
|
HP DL160 G6 Intel®
Xeon® E5530 (2.40GHz/4-core/8MB/80W) FIO Processor Kit |
573895-B21 |
HP DL160 G6 Intel®
Xeon® E5520 (2.26GHz/4-core/8MB/80W) FIO Processor Kit |
490459-B21
|
HP DL160 G6 Intel®
Xeon® L5520 (2.26GHz/4-core/8MB/60W) FIO Processor Kit |
491507-B21
|
HP DL160 G6 Intel®
Xeon® E5504 (2.00GHz/4-core/4MB/80W) FIO Processor Kit |
490457-B21
|
NOTE:
HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE: Turbo indicates the maximum potential frequency increment when
using Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual
memory speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number
indicates the performance/wattage of the processor. "X" denotes
High Performance/Wattage; "E" denotes Enterprise Performance/Wattage
(Mainstream); and "L" denotes Lower Wattage. |
|
|
HP
Hard Drives |
NOTE:
The components of a storage subsystem (e.g. the drive, the HBA/controller,
and the server backplane) should operate at the same data transfer rate
or the system bandwidth will be negotiated down to an acceptable level for
all components.
NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. |
|
NOTE:
A minimum of one hard drive is required when purchasing Non-Hot Plug CTO
Chassis Model (P/N 495958-B21) in Step 1.
NOTE: SATA Non-Hot Plug Hard Drives ONLY required when purchasing
Non-Hot Plug CTO Chassis Models (P/N 495958-B21) in Step 1. |
|
SATA Non-Hot Plug
LFF (3.5-inch) Midline (MDL) Drives |
|
HP 2TB 3G SATA 7.2K
rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
|
HP 1TB 3G SATA 7.2K
rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
|
HP 500GB 3G SATA
7.2K rpm LFF (3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
458941-B21 |
SATA Non-Hot Plug
LFF (3.5-inch) Entry (ETY) Drives |
|
HP 250GB 3G SATA
7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive |
571232-B21 |
HP 160GB 3G SATA
7.2K rpm LFF (3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive |
458947-B21 |
|
HP
Storage Controllers |
NOTE:
A minimum of one Smart Array Controller is ONLY required when purchasing
Hot Plug CTO Chassis Model (P/N 495958-B21) in Step 1. The HP Smart Array
P212 ( 491191-B21) is supported in the Non-Hot Plug Model (P/N 495958-B21)
for external storage control ONLY. The HP Smart Array P410 Controller is
not supported in the Non Hot Plug Model. |
|
NOTE:
The addition of the battery backed cache upgrade enables BBWC, RAID 5, 5+0,
array expansion, logical drive extension, RAID migration, and stripe size
migration. In order to upgrade to RAID 6, at least 256MB Cache and a Battery
is required in addition to the Smart Array Advanced Pack license (P/N 516471-B21). |
|
HP Smart Array P212/256
1-ports Int/1-ports Ext PCIe x8 FIO SAS Controller |
|
HP Smart Array P410/ZM
2-ports Int PCIe x8 FIO SAS Controller |
|
|
Step
3: Choose Additional Factory Integratable Options (only one of the following
from each list unless otherwise noted) |
HP Drive Cage Options |
HP 8SFF HDD Cage
& Backplane G6 FIO
NOTE: Installation of the HP 8SFF
HDD Cage & Backplane G6 FIO Kit is required when installing small form
factor drives. |
515938-B21 |
HP
Cooling Options |
HP Redundant Fan
40x56 1U seG6 Factory Integrated Kit |
536576-B21) |
NOTE:
The HP Redundant Fan 40x56 1U seG6 Kit (P/N 536576-B21) can be ordered as
a factory upgrade for N+1 fan redundancy. |
|
|
Step 4: Choose
Additional Options for Factory Integration |
NOTE:
For additional options, please refer to the "Options" section
below. |
DL160se G6 Core Options
NOTE: Some options may not be integrated
at the factory. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative
for additional information.
|
HP Unique Options |
HP Dedicated Management Port
Kit |
516006-B21
|
HP Internal USB Cable G6 Kit
NOTE: This option required to connect
a USB device internally. |
536769-B21 |
|
HP Processors |
Quad-Core Processors | |
HP DL160 G6 Intel® Xeon®
X5570 (2.93GHz/4-core/8MB/95W) Processor Kit |
508231-B21 |
HP DL160 G6 Intel® Xeon®
X5560 (2.80GHz/4-core/8MB/95W) Processor Kit |
573893-B21 |
HP DL160 G6 Intel® Xeon®
X5550 (2.66GHz/4-core/8MB/95W) Processor Kit |
491511-B21 |
HP DL160 G6 Intel® Xeon®
E5540 (2.53GHz/4-core/8MB/80W) Processor Kit |
490461-B21 |
HP DL160 G6 Intel® Xeon®
E5530 (2.40GHz/4-core/8MB/80W) Processor Kit |
573895-B21 |
HP DL160 G6 Intel® Xeon®
E5520 (2.26GHz/4-core/8MB/80W) Processor Kit |
490459-B21 |
HP DL160 G6 Intel® Xeon®
L5520 (2.26GHz/4-core/8MB/60W) Processor Kit |
491507-B21 |
HP DL160 G6 Intel® Xeon®
E5504 (2.00GHz/4-core/4MB/80W) Processor Kit |
490457-B21 |
NOTE: HT indicates
that the processor model supports Intel® Hyper-Threading Technology. NOTE:
Turbo indicates the maximum potential frequency increment when using Intel®
Turbo Boost Technology, with 4, 3, 2, and 1 cores active. NOTE: DDR3
speed is the maximum memory speed of the processor. Actual memory speed may depend
on the quantity and type of DIMMs installed. NOTE: For the Intel 5500
Series, the letter preceding the model number indicates the performance/wattage
of the processor. "X" denotes High Performance/Wattage; "E"
denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes
Lower Wattage. | |
|
HP Optical Drives
|
HP 9.5mm SATA DVD-ROM Optical
Drive |
481045-B21
| HP
9.5mm SATA DVD RW Optical Drive | 481047-B21 |
|
DL160se G6 Hard Drives |
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. |
|
SATA Hot Plug LFF (3.5-inch)
Midline (MDL) Drives (SAS/SATA Hot Plug Models Only)
NOTE: A SAS HBA or Array Controller
is required. |
|
HP 2TB 3G SATA 7.2K
rpm LFF (3.5-inch) Midline 1yr Warranty Hard Drive |
507632-B21 |
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch)
Midline 1yr Warranty Hard Drive |
454146-B21 |
HP 500GB 3G SATA 7.2K rpm LFF
(3.5-inch) Midline 1yr Warranty Hard Drive |
458928-B21 |
SATA Non-Hot Plug LFF (3.5-inch)
Midline (MDL) Drives (Non-Hot Plug Models Only) |
|
HP 2TB 3G SATA 7.2K rpm LFF (3.5-inch)
Non-hot Plug Midline 1yr Warranty Hard Drive |
507774-B21 |
HP 1TB 3G SATA 7.2K rpm LFF (3.5-inch)
Non-hot Plug Midline 1yr Warranty Hard Drive |
507772-B21 |
HP 500GB 3G SATA 7.2K rpm LFF
(3.5-inch) Non-hot Plug Midline 1yr Warranty Hard Drive |
458941-B21 |
SATA Hot Plug LFF (3.5-inch) Entry
(ETY) Drives |
|
HP 250GB 3G SATA 7.2K rpm LFF
(3.5-inch) Entry 1yr Warranty Hard Drive |
571230-B21 |
HP 160GB 3G SATA 7.2K rpm LFF
(3.5-inch) Entry 1yr Warranty Hard Drive |
458945-B21 |
NOTE: Please see
QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/13021_na/13021_na.html |
|
SATA Non-Hot Plug LFF (3.5-inch)
Entry (ETY) Drives |
|
HP 250GB 3G SATA 7.2K rpm LFF
(3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive |
571232-B21 |
HP 160GB 3G SATA 7.2K rpm LFF
(3.5-inch) Non-hot Plug Entry 1yr Warranty Hard Drive |
458947-B21 |
SATA Hot Plug Midline (MDL) Solid
State Drives |
|
HP 60GB 3G SATA SFF (2.5-inch)
Midline 1yr Warranty Solid State Drive |
577571-B21 |
HP 120GB 3G SATA SFF (2.5-inch)
Midline 1yr Warranty Solid State Drive |
577573-B21 |
SATA Hot Plug 3.5" Midline
(MDL) Solid State Drives |
|
HP 60GB 3G SATA LFF (3.5-inch)
Midline 1yr Warranty Solid State Drive |
570761-B21 |
HP 120GB 3G SATA LFF (3.5-inch)
Midline 1yr Warranty Solid State Drive |
570763-B21 |
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/13415_na/13415_na.html |
|
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives |
|
HP 600GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
581286-B21 |
HP 450GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
581284-B21 |
HP 300GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
507127-B21 |
HP 146GB 6G SAS 15K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
512547-B21 |
HP 146GB 6G SAS 10K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
507125-B21 |
HP 72GB 6G SAS 15K rpm SFF (2.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
512545-B21 |
SAS Hot Plug LFF (3.5-inch) Enterprise
(ENT) Drives |
|
HP 600GB 6G SAS 15K rpm LFF (3.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
516828-B21 |
HP 450GB 6G SAS 15K rpm LFF (3.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
516816-B21 |
HP 300GB 6G SAS 15K rpm LFF (3.5-inch)
Dual Port Enterprise 3yr Warranty Hard Drive |
516814-B21 |
NOTE: The purchase
of SAS HBA or array controller is required. |
|
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html |
|
SAS Hot Plug SFF (2.5-inch) Midline
(MDL) Drives |
|
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch)
Dual Port Midline 1yr Warranty Hard Drive |
507610-B21 |
SAS Hot Plug LFF (3.5-inch) Midline
(MDL) Drives |
|
HP 2TB 6G SAS 7.2K rpm LFF (3.5-inch)
Dual Port Midline 1yr Warranty Hard Drive |
507616-B21 |
HP 1TB 6G SAS 7.2K rpm LFF (3.5-inch)
Dual Port Midline 1yr Warranty Hard Drive |
507614-B21 |
|
HP Networking |
Gigabit Ethernet Adapters |
|
HP NC112T PCIe Gigabit Server
Adapter |
|
HP NC360T PCI Express Dual Port
Gigabit Server Adapter |
|
HP NC373F PCI Express Multifunction
Gigabit Server Adapter |
|
HP NC373T PCI Express Multifunction
Gigabit Server Adapter |
|
HP NC382T PCI Express Dual Port
Multifunction Gigabit Server Adapter |
|
HP NC375T PCI Express Quad Port
Gigabit Server Adapter |
538696-B21 |
HP NC364T PCI Express Quad Port
Gigabit Server Adapter |
435508-B21 |
HP NC365T 4-port Ethernet Server
Adapter |
593722-B21 |
10 Gigabit Ethernet Adapters |
|
HP NC522SFP Dual Port 10GbE Server
Adapter
NOTE: A minimum of two Gigabtyes
(2GB) of server memory is required for each NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately. |
|
HP NC550SFP Dual Port 10GbE Server
Adapter
NOTE: A minimum of two Gigabytes
(2 GB) of server memory is required per each NC550SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately. |
581201-B21 |
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
www.hp.com/go/ProLiantNICs |
|
Additional Options
NOTE:
Some options may not be integrated at the factory. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator.
Contact your local sales representative for additional information. |
HP Entry-Level
Server Management |
HP LO100i Advanced Pack, No Media 1-Server
License including 1 year of 24x7 Technical Support and Updates
NOTE: For additional License Kits
please see the Lights-Out 100i QuickSpecs at: www.hp.com/go/lo100 |
530521-B21 |
|
HP
Insight Software |
HP Insight Control for Linux |
|
HP Insight Control for Linux including 1yr
24x7 Support Electronic License |
TC213AAE |
HP Insight Control for Linux including 1yr
24x7 Support Single Server License
NOTE: This part number can be purchased
as a single license or as multiple licenses with a single activation key.
Customer will receive a license entitlement certificate via e-mail. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service.
NOTE: Electronic LTUs are only available through limited points of
sales; if not available, order a printed license entitlement certificate
instead. |
TC209A |
HP Insight Control for Linux Media Kit
NOTE: This optional Media pack DVD
contains the ISO image for HP Insight Control for Linux, HP Systems Insight
Manager, HP Insight Control power management, HP Insight Control virtual
machine management, and an integrated installer. Servers must be acquired
separately.
NOTE: This Media pack is optional because the latest ISO image and
latest updates may be downloaded at no cost from: https://www.hp.com/go/ic-linux
(click on Download button). |
TC208A |
NOTE: Electronic licenses
can be used to purchase multiple licenses with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html |
|
HP Insight Control server deployment |
|
HP Insight Control Server Deployment including
1yr 24x7 Support Electronic License |
T9082AAE |
HP Insight Control Server Deployment including
1yr 24x7 Support Single Server License |
452151-B21 |
NOTE: Licenses ship without
media. The Insight Control Media Kit can be ordered separately, or can be
downloaded at: https://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses
with a single activation key.
NOTE: Customer will receive a license entitlement certificate, which
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the Insight Control
QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html |
|
|
High Performance Clusters
|
HP Cluster Management Utility
Compute Node License
NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one node (server). Customer will receive a printed
end user license agreement and license entitlement certificate via physical
shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html |
436284-B21
|
HP Cluster Management Utility
Media and Management License
NOTE: Order a minimum of one license
per cluster to purchase media including software and documentation, which
will be delivered to the customer, and also licenses CMU management. No
license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html |
433257-B21 |
HP HPC Linux Value Pack One Processor
License
NOTE: This part number can be used
to purchase one certificate for multiple licenses with a single activation
key. Each license is for one socket (a.k.a. processor). Customer will receive
a printed end user license agreement and license entitlement certificate
via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/13485_na/13485_na.html |
TC293A |
HP HPC Linux Value Pack Media
NOTE: This part number can be used
to purchase media including software and documentation, which will be delivered
to the customer.
NOTE: For additional license kits please see the QuickSpecs at: https://h18004.www1.hp.com/products/quickspecs/13485_na/13485_na.html |
TC294A |
|
HP Drive Cage Options
|
HP 4HDD Hot Plug Backplane G6
Kit |
512181-B21
|
NOTE:
Installation of the 4 HDD Hot Plug Backplane G6 Kit (512181-B21) is required
if ordering third or fourth Hard Drives for Hot Plug models only. |
|
|
HP Security - TPM
|
HP Trusted Platform Module Option
Kit |
488069-B21
|
NOTE: The TPM
(Trusted Platform Module) is a microcontroller chip that can securely store
artifacts used to authenticate the server platform. These artifacts can
include passwords, certificates and encryption keys. Windows® BitLocker™
Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities
of a Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker
to help protect user data and to ensure that a server running Windows Server
2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go
to: https://www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition
required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must
be retained. Misplacing or losing the key could result in data loss. |
|
|
HP InfiniBand Options |
HP 10 GbE PCI-e G2 Dual Port Adapter |
516937-B21
|
HP IB 4X DDR CX-2 PCI-e G2 Dual
Port HCA |
592521-B21 |
HP IB 4X DDR PCI-e DUAL PORT 0
mem HCA |
483513-B21 |
HP IB 4X DDR PCI-e DUAL PORT HCA |
448397-B21 |
HP IB 4X QDR CX-2 PCI-e G2 Dual
Port HCA |
592520-B21 |
QLogic IB 4X QDR PCI-e G2 Dual-port
HCA |
583211-B21 |
NOTE: Please see
the QuickSpecs for additional information: https://h18000.www1.hp.com/products/quickspecs/13078_na/13078_na.html |
|
|
HP Backup & Recovery
Software |
Data Protector Express |
|
HP Data Protector Express 5.0
for 1 Server |
TC330AAE |
HP Data Protector Express 5.0
for 3 Servers |
TC331AAE |
HP Data Protector Express 5.0
for 10 Servers |
TC332AAE |
HP Data Protector Express 5.0
for 1 Server Upgrade from HP Data Protector Express Basic |
TC333AAE |
NOTE: Only one
of these Data Protector Express base products is required. To see available
options: https://www.hp.com/go/dataprotectorexpress |
|
|
HP Tape Backup |
NOTE: For the complete range of StorageWorks tape drives, autoloaders,
libraries and media see: https://www.hp.com/go/tape.
For hardware and software compatibility of HP StorageWorks tape backup
products see: https://www.hp.com/go/connect.
NOTE: Connection using the HP P212 SAS Smart Array Controller ( 462828-B21)
recommended.
|
|
HP StorageWorks DAT 160 SAS Internal
Tape Drive
NOTE: For installation into 1U SAS
Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount Kit (AG576B). No peripheral
bay available for installation into the server. |
Q1587A
|
HP StorageWorks DAT 320 USB in
1U Rack-mount Kit |
AP835B
|
HP StorageWorks DAT 320 SAS Internal
Tape Drive
NOTE: For installation into 1U SAS
Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount Kit (AG576B). No peripheral
bay available for installation into the server. |
AJ830A |
HP StorageWorks Ultrium 448 SAS
Internal Drive
NOTE: For installation into 1U SAS
Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount Kit (AG576B). No peripheral
bay available for installation into the server. |
DW085A
|
HP StorageWorks Ultrium 920 SAS
Internal Tape Drive
NOTE: For installation into 1U SAS
Rack-Mount Kit (AE459B) or 3U SAS Rack-Mount Kit (AG576B). No peripheral
bay available for installation into the server. |
EH847A |
HP StorageWorks 1/8 G2 Ultrium
920 SAS Autoloader
NOTE: Requires HP 1U Tape Autoloader
Rack-Mount Kit (AH166A) for rack installation. |
AH558A |
HP StorageWorks MSL2024 Ultrium
920 SAS Tape Library |
AH559A |
|
HP Disk Backup
|
NOTE: For the
complete range of StorageWorks D2D Backup Systems see: https://www.hp.com/go/d2d.
For the complete range of StorageWorks RDX drives and media see: https://www.hp.com/go/rdx.
For hardware and software compatibility of HP StorageWorks disk backup products
see: https://www.hp.com/go/connect. |
|
HP StorageWorks D2D Backup Systems
with Backup Data Deduplication |
|
HP StorageWorks D2D2502i Backup
System
NOTE: 1.5TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended. |
EJ001B |
HP StorageWorks D2D2504i Backup
System
NOTE: 3.0TB of usable network disk
backup capacity. Network connected appliance with connectivity using the
iSCSI protocol. If the server requires a hardware iSCSI initiator, the QLogic
QLA4050 Host Bus Adapter is recommended. |
EJ002B |
USB Removable Media RDX Disk Backup
Systems |
|
HP RDX 1TB Int Removable Disk
Backup System |
BV847A |
HP StorageWorks RDX320 Internal
Removable Disk Backup System
NOTE: For installation into 1U USB
Rack-Mount Kit ( A8007A). No peripheral bay available for drive installation
into the server. 320GB of disk capacity per data cartridge. |
AJ767A |
HP StorageWorks RDX500 Internal
Removable Disk Backup System
NOTE: For installation into 1U USB
Rack-Mount Kit ( A8007A). No peripheral bay available for drive installation
into the server. 500GB of disk capacity per data cartridge. |
AJ934A |
|
HP StorageWorks
Options |
StorageWorks Fibre Channel HBA
NOTE: The following is a list of
all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed
compatibility information please see: https://h18006.www1.hp.com/storage/saninfrastructure/hba.html
|
|
Brocade Fibre Channel HBAs |
|
HP StorageWorks 81B PCIe 8Gb Fibre
Channel Single Port Host Bus Adapter |
|
HP StorageWorks 82B PCIe 8Gb Fibre
Channel Dual Port Host Bus Adapter |
AP770A |
HP StorageWorks 41B PCIe 4Gb Fibre
Channel Single Port Host Bus Adapter |
|
HP StorageWorks 42B PCIe 4Gb Fibre
Channel Dual Port Host Bus Adapter |
|
Emulex Fibre Channel HBAs |
|
HP StorageWorks 81E 8Gb Single
Port PCI-e Fibre Channel Host Bus Adapter |
AJ762A |
HP StorageWorks 82E 8Gb Dual Port
PCI-e Fibre Channel Host Bus Adapter |
AJ763A |
HP StorageWorks FC2142SR 4Gb PCIe
Host Bus Adapter |
A8002A |
HP StorageWorks FC2242SR 4Gb PCIe
DC Host Bus Adapter |
|
QLogic Fibre Channel HBAs |
|
HP StorageWorks 81Q PCI-e Fibre
Channel Host Bus Adapter |
AK344A |
HP StorageWorks 82Q 8Gb Dual Port
PCI-e Fibre Channel Host Bus Adapter |
AJ764A |
HP StorageWorks FC1142SR 4Gb PCIe
Host Bus Adapter |
|
HP StorageWorks FC1242SR 4Gb PCIe
DC Host Bus Adapter |
|
StorageWorks Converged Network
Adapter |
|
HP StorageWorks CN1000E Dual Port
Converged Network Adapter |
AW520A |
|
HP Power Distribution
Units |
Monitored PDUs |
|
HP Monitored Power Distribution
Unit: Full Rack Version |
|
HP 8.6 kVA S1324 Monitored PDU-
single input, 3Ø, 24A |
AF504A
|
HP 8.3 S1140 Monitored PDU- single
input, 1Ø, 40A |
AF506A |
HP Monitored Power Distribution
Unit: Half Rack Version |
|
HP 4.9 kVA S124 Monitored PDU-
single input, 1Ø, 24A |
AF914A |
Modular Power Distribution Units
1U/0U (Up to 32 outlets) |
|
4.9 kVA Modular PDU, 24A |
252663-D72 |
8.3 kVA Modular PDU, 40A |
252663-D73
|
3.6 kVA Modular PDU, 16A |
|
NOTE: Please see
the QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/12118_na/12118_na.html |
|
NOTE: Please see
the UPS and PDU cable matrix's on the HP Power Protection and Management
page. Under Power Cords, click on the "HP Power Cord Matrix" link. That
link will list cable descriptions, requirements, and specifications for
UPS and PDU units. Please see the following link: www.hp.com/products/powercords |
|
|
HP Rack Series
|
HP Rack 10000 G2 Series
(Graphite Metallic) |
|
HP 10642 G2 1200mm deep Shock
Rack |
AF092A
|
HP 10647 G2 1200mm deep Shock
Rack |
AF094A
|
HP 10642 G2 Pallet Universal Rack |
AF001A |
HP 10642 G2 Shock Universal Rack |
AF002A |
NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed. |
|
NOTE: Please see
the Rack 10000 G2 QuickSpecs for Technical Specifications such as height,
width, depth, weight, and color:
https://h18000.www1.hp.com/products/quickspecs/12402_na/12402_na.html |
|
NOTE: For additional
information regarding Rack Cabinets, please see the following URL: https://www.hp.com/go/rackandpower. |
|
NOTE: The increasing power of new high-performance processor technology
requires increased cooling efficiency for rack-mounted servers. The 10000
G2 Series Racks provide enhanced airflow for maximum cooling, allowing
these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional
requirements to ensure adequate airflow and to prevent damage to the equipment:
- Front and rear doors: If your 42U server rack
includes closing front and rear doors, you must allow 830 square inches
(5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for
ventilation).
- Side: The clearance between the installed rack component and the side
panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty
front panel U-spaces in the rack. This arrangement ensures proper airflow.
Using a rack without blanking panels results in improper cooling that
can lead to thermal damage.
|
|
NOTE: HP ProLiant
DL rack models have fixed rails which provide support for racks with round
mounting holes and tool-free support for racks with square mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment
range of 26" - 36".
NOTE: Support for all 2 and 4 post Telco racks and threaded hole
racks requires an additional option kit from Rack Solutions. The Rack Solutions
brackets can be purchased at: www.hp.com/go/rackandpower. |
|
|
HP Rack Options |
HP KVM Switch Options
|
|
0x2x16 KVM Server Console G2 Switch
with Virtual Media and CAC |
AF618A |
0x2x32 KVM Server Console G2 Switch
with Virtual Media and CAC |
AF619A |
1x1Ex8 KVM IP Console Switch G2
with Virtual Media and CAC |
AF620A |
2x1Ex16 KVM IP Console Switch
G2 with Virtual Media and CAC |
AF621A |
4x1Ex32 KVM IP Console Switch
G2 with Virtual Media and CAC |
AF622A |
Server console switch 0x2x8 |
AF616A |
Server console switch 0x2x16 |
AF617A |
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: https://www.hp.com/go/kvm. |
|
|
HP USB and SD Options |
HP USB Optical Mouse |
|
HP USB 04 Standard Keyboard |
DT528A#ABA |
|
HP Care
Pack Services |
Hardware Services 4-Hour On-site
Service |
|
13-Hour x 5-Day Coverage, 3 Years,
Electronic |
U9509E
|
24-Hour x 7 Day Coverage, 3 Years,
Electronic |
U9510E
|
Hardware Services Next Business
Day On-Site Service |
|
9-Hour x 5-Day Coverage, 3 Years, Electronic
|
U9508E
|
Hardware Services 6-Hour Call
to Repair On-Site Service |
|
Hardware Installation, Electronic |
U9520E
|
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic |
U9511E |
NOTE: For more
information, customer/resellers can contact: https://www.hp.com/services/carepack |
|
Memory
HP
ProLiant DL160se G6 (all models) | NOTE:
Memory configurations listed do not apply to "Factory Integrated Models". |
Standard Memory
4GB (2x2GB) or 6GB (3 x 2GB) depending on model, PC3-10600E Unbuffered UDIMM
memory, with ECC.
Maximum Memory
Up to 192 GB memory is available with the optional installation of PC3-8500R
Registered DIMM memory kits. |
NOTE:
Charts do not represent all possible memory configurations. |
DDR3 memory population guidelines
NOTE: For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
- For servers with twelve (12)
memory slots
- There are three (3) channels per processor; six (6)
channels per server
- There are two (2) DIMM slots for each memory channel;
twelve (12) total slots
- Memory channel 1 consists of the two (2) DIMMs that
are closest to the processor
- Memory channel 3 consists of the two (2) DIMMs that
are furthest from the processor
- DIMM slots that are white should be populated first
- Do not mix Unbuffered memory (UDIMMs) with Registered
memory (RDIMMs)
- Do not install DIMMs if the corresponding processor
is not installed
- If only one processor is installed in a 2CPU system,
only half of the DIMM slots are available
- To maximize performance, balance the total memory
capacity between all installed processors
- It is not required, but it is recommended to load
the channels similarly if possible
- You can only have up to eight (8) ranks installed
per channel
- You can only install two quad-rank DIMMs per channel
- You can only install two UDIMMs per channel; if available,
the third slot in the channel must remain empty
- Populate DIMMs from heaviest load (quad-rank) to
lightest load (single-rank) within a channel
- Heaviest load (DIMM with most ranks) within a channel
goes furthest from the chipset
- For memory mirroring mode, channel 3 must be unpopulated.
Channels 1 and 2 are populated identically
- For lock-step mode, channel 3 must be unpopulated.
DIMMs in channels 1 and 2 will be installed in pairs. The paired slots
will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
- No mixing DIMM voltage; all DIMMs must be the same
voltage
|
DIMM Type -> |
Registered
DIMMs (RDIMMs) |
Unbuffered
with ECC DIMMs (UDIMMs) |
DIMM Rank -> |
Dual Rank (2R) |
Quad Rank (4R) |
Single Rank (1R) |
Dual Rank (2R) |
DIMM Capacity -> |
2GB |
4GB |
8GB |
2GB
|
4GB |
16GB |
1GB |
2GB |
1GB |
2GB |
DIMM Native Speed (MHz) -> |
1333 |
1333 |
1066 |
* |
1066 |
1066 |
1333 |
* |
* |
1333 |
|
|
|
|
|
|
|
|
|
|
|
SLOTS THAT CAN BE POPULATED |
12 slot servers |
12 |
12 |
12 |
* |
12 |
12 |
12 |
* |
* |
12 |
|
|
|
|
|
|
|
|
* |
* |
|
MAXIMUM CAPACITY (GB) |
12 slot servers |
24 |
48 |
96 |
* |
48 |
192 |
12 |
* |
* |
24 |
|
|
|
|
|
|
|
|
* |
* |
|
POPULATED DIMM SPEED (MHz) |
1 DIMM Per Channel |
1333 |
1333 |
1066 |
* |
1066 |
1066 |
1333 |
* |
* |
1333 |
2 DIMM Per Channel |
1333 |
1333 |
1066 |
* |
800 |
800 |
1333 |
* |
* |
1333 |
* - not supported
by HP at this time. |
|
NOTES: - Mixing DIMM speeds is allowed, but the system processor
speed rules always override the DIMM capabilities
- If you do mix DIMM speeds,
the memory bus will default to the minimum clock rate of all DIMMs in the system
- even if the slower DIMM is on the other processor
- If you install 1x
1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, you still run at 1066MHz
- If
you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per
Channel (DPC) in each of the other channels, you run at 1066MHz
- If you
install 3DPC in one channel (if applicable) and 1DPC in all other channels, you
run at 800MHz
- 95 Watt CPU's are required for 1333MHz DIMM speeds. All
other CPU's are capable of up to 1066MHz
- References to the above MHz speeds
are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
|
|
DIMM slot and configuration diagrams Basic memory slot & population
diagram - Population order; start with "A" first, "B"
second, "C" third, etc.
|
12
DIMM SLOTS (6 per CPU node) | | CPU1 | CPU2 | |
| slot
# | population order | slot
# | population order | |
Chnl 1 | 1 | D
| 1 | D
| Chnl
1 | 2 | A
| 2 | A |
| | | | | |
Chnl 2 | 3 | E
| 3 | E
| Chnl
2 | 4 | B
| 4 | B |
| | | | | |
Chnl 3 | 5 | F
| 5 | F
| Chnl
3 | 6 | C | 6 | C |
| |
Standard memory configuration
(1 CPU model) - 6GB, consisting of three (3) 2GB dual-rank PC3-10600
RDIMMs
|
| CPU1 | CPU2 | |
| slot
# | population order | slot
# | population order | |
Chnl 1 | 1 | D;
empty | 1 | D:
empty | Chnl 1 |
2 | A;
2GB DIMM | 2 | A:
empty | | | | | | |
Chnl 2 | 3 | E;
empty | 3 | E:
empty | Chnl 2 |
4 | B;
2GB DIMM | 4 | B:
empty | | | | | | |
Chnl 3 | 5 | F;
empty | 5 | F:
empty | Chnl 3 |
6 | C;
2GB DIMM | 6 | C:
empty | | |
Standard memory plus optional
memory (1 CPU model) - 30GB, consisting of three (3) 2GB RDIMMs plus
three (3) 8GB RDIMMs
- 3x 2GB dual-rank PC3-10600 RDIMMs
- 3x
8GB dual-rank PC3-8500 RDIMMs
|
| CPU1 | CPU2 | |
| slot
# | population order | slot
# | population order | |
Chnl 1 | 1 | D;
8GB DIMM | 1 | D:
empty | Chnl 1 |
2 | A;
2GB DIMM | 2 | A:
empty | | | | | | |
Chnl 2 | 3 | E;
8GB DIMM | 3 | E:
empty | Chnl 2 |
4 | B;
2GB DIMM | 4 | B:
empty | | | | | | |
Chnl 3 | 5 | F;
8GB DIMM | 5 | F:
empty | Chnl 3 |
6 | C;
2GB DIMM | 6 | C:
empty | | |
Standard memory replaced
with optional memory (1 CPU model) RDIMM maximum configuration
- 96GB, consisting of six (6) 8GB dual-rank PC3-8500R-7 RDIMMs
|
| CPU1 | CPU2 | |
| slot
# | population order | slot
# | population order | |
Chnl 1 | 1 |
D; 16GB DIMM |
1 | D;
empty | Chnl 1 |
2 |
A; 16GB DIMM |
2 | A;
empty | | | | | | |
Chnl 2 | 3 |
E; 16GB DIMM |
3 | E;
empty | Chnl 2 |
4 |
B; 16GB DIMM |
4 | B;
empty | | | | | | |
Chnl 3 | 5 |
F; 16GB DIMM |
5 | I:
empty
| Chnl 3 |
6 |
C; 16GB DIMM |
6 | C;
empty | | |
UDIMM maximum configuration
(1 CPU model) - 12GB, consisting of six (6) 2GB dual-rank PC3-10600
UDIMMs
|
| CPU1 | CPU2 | |
| slot
# | population order | slot
# | population order | |
Chnl 1 | 1 | D;
2GB DIMM | 1 | D;
empty | Chnl 1 |
2 | A;
2GB DIMM | 2 | A;
empty | | | | | | |
Chnl 2 | 3 | E;
2GB DIMM | 3 | E;
empty | Chnl 2 |
4 | B;
2GB DIMM | 4 | B;
empty | | | | | | |
Chnl 3 | 5 | F;
2GB DIMM | 5 | F;
empty | Chnl 3 |
6 | C;
2GB DIMM | 6 | C;
empty | | |
Standard memory replaced
with optional memory (2 CPU model) RDIMM maximum configuration
- 192GB, consisting of twelve (12) 8GB dual-rank PC3-8500R-7 RDIMMs
|
|
CPU1 |
CPU2 |
|
|
slot # |
population order |
slot # |
population order |
|
Chnl 1 |
1 |
D; 16GB DIMM |
1 |
D; 16GB DIMM |
Chnl 1 |
2 |
A; 16GB DIMM |
2 |
A; 16GB DIMM |
|
|
|
|
|
|
Chnl 2 |
3 |
E; 16GB DIMM |
3 |
E; 16GB DIMM |
Chnl 2 |
4 |
B; 16GB DIMM |
4 |
B; 16GB DIMM |
|
|
|
|
|
|
Chnl 3 |
5 |
F; 16GB DIMM |
5 |
F; 16GB DIMM |
Chnl 3 |
6 |
C; 16GB DIMM |
6 |
C; 16GB DIMM |
| |
UDIMM maximum configuration
(2 CPU model) - 24GB, consisting of twelve (12) 2GB dual-rank PC3-10600
UDIMMs
|
| CPU1 | CPU2 | |
| slot
# | population order | slot
# | population order | |
Chnl 1 | 1 | D;
2GB DIMM | 1 | D;
2GB DIMM | Chnl 1 |
2 | A;
2GB DIMM | 2 | A;
2GB DIMM | | | | | | |
Chnl 2 | 3 | E;
2GB DIMM | 3 | E;
2GB DIMM | Chnl 2 |
4 | B;
2GB DIMM | 4 | B;
2GB DIMM | | | | | | |
Chnl 3 | 5 | F;
2GB DIMM | 5 | F;
2GB DIMM | Chnl 3 |
6 | C;
2GB DIMM | 6 | C;
2GB DIMM | | |
NOTE: Capacity
references are rounded to the common Gigabyte values.
- 1GB = 1024MB
- 2GB = 2048MB
- 4GB = 4096MB
- 8GB = 8192MB
- 16GB = 16384MB
|
|
DDR3 memory options part number
decoder
|
|
Following are memory
options available from HP: |
Memory |
Registered DIMMs (RDIMMs) |
|
HP 2GB (1x2GB) Dual Rank x8 PC3-10600
(DDR3-1333) Registered CAS-9 Memory Kit |
500656-B21 |
HP 4GB (1x4GB) Dual Rank x4 PC3-10600
(DDR3-1333) Registered CAS-9 Memory Kit |
500658-B21 |
HP 4GB (1x4GB) Quad Rank x8 PC3-8500
(DDR3-1066) Registered CAS-7 Low Power Memory Kit |
500660-B21 |
HP 4GB (1x4GB) Single Rank x4
PC3-10600 (DDR3-1333) Registered CAS-9 Memory Kit |
593339-B21 |
HP 8GB (1x8GB) Dual Rank x4 PC3-10600
(DDR3-1333) Registered CAS-9 Memory Kit |
500662-B21 |
HP 16GB (1x16GB) Quad Rank x4
PC3-8500 (DDR3-1066) Registered CAS-7 Memory Kit |
500666-B21 |
Unbuffered with ECC DIMMs (UDIMMs) |
|
HP 1GB (1x1GB) Single Rank x8
PC3-10600 (DDR3-1333) Unbuffered CAS-9 Memory Kit |
500668-B21 |
HP 2GB (1x2GB) Dual Rank x8 PC3-10600
(DDR3-1333) Unbuffered CAS-9 Memory Kit |
500670-B21 |
HP 4GB (1x4GB) Dual Rank x8 PC3-10600
(DDR3-1333) Unbuffered CAS-9 Memory Kit |
500672-B21 |
NOTE: All DDR3
memory option kits consist of one DIMM per kit. For detailed memory configuration
rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information
on ProLiant Energy Efficient Features, see: https://h18004.www1.hp.com/products/servers/platforms/energyefficient/ |
|
Storage
|
1-4 |
Four Non-hot plug SATA or four 3.5" Hot-plug SAS/SATA hard drive bays |
A | Optional
DVD-ROM, or DVD RW |  | 1-8 | Eight
2.5" Hot-plug SATA/SAS hard drive bays | A | Optional
DVD-ROM, or DVD RW |
| Drive
Support |
| |
Quantity Supported |
Position Supported |
Controller |
Removable Media |
|
| |
DVD-ROM |
Up to 1
|
A
|
Integrated IDE (ATAPI) (optional) |
DVD RW |
Up to 1
|
A
|
Integrated IDE (ATAPI) (optional) |
|
DL160se G6 Hard Drives
NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, and the server backplane)
should operate at the same data transfer rate or the system bandwidth will
be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details. |
SATA Non-Hot Plug
LFF (3.5-inch) Midline (MDL) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3GSATA 7.2K |
Up to 4
|
1-4
|
HP Embedded SATA RAID Controller
NOTE: Transfer rate: 1.5 Gb/s SATA |
|
SATA Non-Hot Plug
LFF (3.5-inch) Entry (ETY) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
250GB 3G SATA 7.2K
160GB 3G SATA 7.2K |
Up to 4
|
1-4
|
HP Embedded SATA RAID Controller
NOTE: Transfer rate: 1.5 Gb/s SATA |
|
SATA Hot Plug LFF
(3.5-inch) Midline (MDL) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
2TB 3G SATA 7.2K
1TB 3G SATA 7.2K
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K |
Up to 4
|
1-4
|
HP Smart Array P212Controller
HP Smart Arrays P410Controller
NOTE: Support for transfer rates
up to 3 Gb/s |
|
SATA Hot Plug 3.5"
Entry (ETY) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
250GB 3G SATA 7.2K
160GB 3G SATA 7.2K |
Up to 4
|
1-4
|
HP Embedded SATA RAID Controller
NOTE: Support for transfer rates
up to 3 Gb/s |
|
SATA Hot Plug Midline
(MDL) Solid State Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD |
Up to 8
|
1-8
|
HP Smart Array E200i/64MB Controller
HP Smart Array E200i/128 BBWC Controller
HP Smart Array E500/256MB Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller |
|
SATA Hot Plug 3.5"
Midline (MDL) Solid State Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
60GB 3G SATA SSD
120GB 3G SATA SSD |
Up to 4
|
1-4
|
HP Smart Array E200i/64MB Controller
HP Smart Array E200i/128 BBWC Controller
HP Smart Array E500/256MB Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller |
|
SAS Hot Plug SFF (2.5-inch)
Midline (MDL) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
500GB 6G SAS 7.2K DP |
Up to 8
|
1-8
|
HP Smart Array P800/512 BBWC Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/ 256 MB Controller
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB BBWC Controller |
|
SAS Hot Plug LFF (3.5-inch)
Midline (MDL) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
2TB 6G SAS 7.2K
1TB 6G SAS 7.2K |
Up to 4
|
1-4
|
HP Smart Array P212Controller
HP Smart Arrays P410Controller
NOTE: Support for transfer rates
up to 3 Gb/s |
|
SAS Hot Plug SFF (2.5-inch) Enterprise
(ENT) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 10K
146GB 6G SAS 15K
146GB 6G SAS 10K
72GB 6G SAS 15K |
Up to 4
|
1-4
|
HP Smart Array P212Controller
HP Smart Array P410Controller
NOTE: Support for transfer rates
up to 3 Gb/s
|
|
SAS Hot Plug LFF (3.5-inch)
Enterprise (ENT) Drives |
|
Quantity
Supported
|
Position
Supported
|
Controller |
600GB 6G SAS 15K
450GB 6G SAS 15K
300GB 6G SAS 15K |
Up to 4
|
1-4
|
HP Smart Array P212Controller
HP Smart Array P410Controller
NOTE: Support for transfer rates
up to 3 Gb/s |
|
|
Position
|
Recommended Controller
|
Part Number
|
HP StorageWorks SCSI Tape Drives
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-3 Ultrium 960
LTO4 Ultrium 1760
LTO-4 Ultrium 1840
DAT 40
DAT 72
DAT 160
1U Rack-Mount Kit
3U Rack-Mount Kit |
External
|
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter |
|
|
|
|
|
HP StorageWorks USB Tape Drives
DAT 40
DAT 72
DAT 160
DAT 320
1U USB Rack-Mount Kit |
External
|
USB 2.0 Port |
N/A
|
|
|
|
|
HP StorageWorks SAS Tape Drives
DAT 160
DAT 320
LTO-2 Ultrium 448
LTO-3 Ultrium 920
LTO-4 Ultrium 1760
LTO-4 Ultrium 1840
LTO-5 Ultrium 3000
LTO-5 Ultrium 3280
1U Rack-Mount Kit
3U Rack-Mount Kit |
External
|
HP Smart Array P212/ZM 1-ports Int/1-ports
Ext PCIe x8 SAS Controller |
|
|
|
|
|
HP StorageWorks SCSI Tape Autoloaders
DAT 72x10 Autoloader
1/8 G2 Autoloader |
External
|
HP SC11Xe Ultra320 Single Channel/
PCIe x4 SCSI Host Bus Adapter |
|
|
|
|
|
HP StorageWorks SCSI Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000 |
External
|
HP StorageWorks U320e SCSI Dual
Channel Host Bus Adapter |
|
|
|
|
|
HP StorageWorks SAS Tape Autoloaders
and Libraries
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096 |
External
|
HP Smart Array P212/ZM 1-ports Int/1-ports
Ext PCIe x8 SAS Controller |
|
|
|
|
|
HP StorageWorks Fibre Channel
Tape Libraries
MSL2024
MSL4048
MSL8096
MSL6000 |
External |
Please consult the EBS connectivity
matrix at: https://www.hp.com/go/ebs
for connectivity information and the supported Fibre Channel HBAs shown
in this QuickSpecs. |
|
|
|
|
|
HP StorageWorks USB RDX Removable
Disk Backup System
RDX160
RDX320
RDX500
RDX750 |
External
|
USB 2.0 port |
N/A
|
|
|
|
|
HP StorageWorks D2D Backup Systems,
iSCSI
D2D2500i
D2D4000i |
External |
Embedded Network Controller. If
the server requires a hardware iSCSI initiator, the QLogic QLA4050 Host
Bus Adapter is recommended. |
|
|
|
|
|
HP StorageWorks D2D Backup Systems,
Fibre Channel
D2D4000fc |
External |
Direct server attach is not supported,
requires connection via SAN fabric. See: https://www.hp.com/go/connect |
|
Power Specifications
System Specifications
Power | | |
ProLiant DL160se G6 Fully Configured | 115V/60Hz | 220V/50Hz |
Fully Loaded System Input
Wattage (W) | 448 | 445 |
Fully Loaded System Input
Current (A rms) | 3.833 | 2.046 |
Fully Loaded System Thermal
(BTU- Hr) | 1529 | 1518 |
Fully Loaded System VA
(Volt-Amp) | 449 | 454 |
System Inrush Current with
all power supplies loaded (A) | 10.1 | 10.96 |
Power cord requirements | Nema
5-15P to IEC320-C13 | IEC320-C13
to IEC320-C14 | NOTE:
Power shown is for a fully configured system consisting of (2) CPU, (8) double-sided
DIMMs, (2) HDDs, (1) CD-ROM, and (2) PCI cards. | Power
Cord | AF556A | |
|
Server Power Cords |
One 6' Highline (IEC-IEC) power
cord ships standard
NOTE: HP ProLiant DL servers no longer
ship standard with NEMA power cords (163719-002) that allow connection to
110V wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only
a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server
using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must
be ordered separately.
If customers require a power cord, they can check the power cord matrix
for the appropriate cord. Please see the following power cord matrix: https://www.hp.com/go/powercordmatrix. |
Quickspecs
System Unit | Dimensions
(H x W x D) (with bezel) | 1.70
x 17.64 x 26.85 in (4.32 x 44.80 x 68.20 cm) |
Weight (approximate) | Maximum
(all hard drives, power supplies, and processors installed) | 34.00
lb (16.78 kg) | Minimum
(one hard drive, power supply, and processor installed) | 28.00
lb (12.7 kg) |
Input Requirements (per power supply) |
Rated Line Voltage | 90
to 132 VAC 180 to 264 VAC | Rated
Input Current | 5. 8
Amps (at 100 VAC) to 2.9 Amps (at 200 VAC) | Rated
Input Frequency | 47
to 63 Hz | BTU
Rating | Rated Input Power |
570W (at 100 VAC) 565W (at 200 VAC) | Maximum | 500W | 1940
BTU / hr (at 100 VAC) 1920 BTU/hr (at 200 VAC) | 460W | 1773
BTU / hr (at 120 VAC) 1715 (at 240 VAC) | 750W | 2892
BTU / hr (at 120 VAC) 2797 (at 240 VAC) | Power
Specifications | To
review typical system power ratings use the Power Advisor which is available via
the online tool located at URL:
www.hp.com/go/proliant-energy-efficient Or www.hp.com/go/hppoweradvisor
- Click on the system of interest. Example: DL160 G6 - Follow the instructions
of the next screens. | Power
Supply Output (per power supply) | Rated
Steady-State Power |
500 Watts (at 100 VAC), 500 Watts (at 200 VAC) | Maximum
Peak Power (See Power Specifications Tables) | 500Watts
(at 100 VAC), 500 Watts (at 200 VAC) | System
Inlet Temperature | Operating | 10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault
or above 30°C (86°F). | Non-operating | -30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr). |
Relative Humidity
(non-condensing) | Operating | 10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing. | Non-operating | -30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr). |
Altitude | Operating | 3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min). |
Non-operating | 9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min). |
Acoustic Noise | Listed
are the declared A-Weighted sound power levels (LWAd) and declared average bystander
position A-Weighted sound pressure levels (LpAm) when the product is operating
in a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). |
Idle | |
LWAd | 6.4
B |
LpAm | 49dBA |
Operating | |
LWAd | 6.4
B |
LpAm | 49dBA |
Emissions Classification
(EMC) | FCC Rating | Class
A | Normative Standards | CISPR
22; EN55022; EN55024; FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24;
EN 61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1 | NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is eligible
to bear the appropriate compliance logos and statements. |
|
NC362i Integrated
Dual Port Gigabit Server Adapter |
Network Interface |
Integrated 10/100/1000BASE-T
Transceiver |
Combines a triple-speed
IEEE 802.3TM - Compliant Media Access Controller (MAC) with a triple-speed
Ethernet transceiver. |
Data Transfer Method |
Compliant to x1 PCIe
Specification |
Controller |
Intel® 82576 |
Network Transfer Rate |
10Base-T (Half-Duplex) |
10 Mb/s |
10Base-T (Full-Duplex) |
20 Mb/s |
100Base-TX (Half-Duplex) |
100 Mb/s |
100Base-TX (Full-Duplex) |
200 Mb/s |
1000Base-TX (Half and Full-Duplex) |
2000Mb/s |
Connector |
RJ-45 connector |
Cable Support |
Performs all the physical
layer functions for 10BASE-T, 100BASE-T, and 1000BASE-T Ethemet on standard
Category 5 UTP |
|
Smart Array P410/410i Controller
|
Disk Drive and Enclosure
Interface |
6Gb/s SAS (Serial Attached SCSI) |
3Gb/s SATA (Serial ATA) |
SAS Connectors |
2 internal (Mini-SAS) x8 wide
port connectors |
Cache Memory Speed |
DDR2-533MHz with 40 or 72-bit
wide bus provides up to 4.2 GB/s maximum bandwidth. |
Server Interface |
x8 2.5G PCIe 2.0 provides 2GB/s
maximum bandwidth |
SAS Speed |
x8 6Gb/s SAS provides 4.8GB/s
maximum bandwidth |
Cache Memory |
40-bit 256MB ECC protected cache
(72-bit 512MB BBWC module upgrades available); transportable with battery-backed
upgrade |
Logical Drives Supported |
Up to 64 logical drives |
Host Memory Addressing |
64-bit, supporting greater than
4GB server memory space |
RAID Support |
RAID 6, 6+0 (Advanced Data Guarding)
NOTE: The minimum of 256 MB cache,
battery kit, and Smart Array Advanced Pack License Key upgrade is required
to enable RAID 6, 6+0 |
RAID 5, 5+0 (Distributed Data
Guarding)
NOTE: The 256 MB is required to enable
RAID 5, 5+0 support of the Smart Array P410 |
RAID 1+0 (Striping & Mirroring) |
RAID 0 (Striping) |
|
Environment-friendly Products
and Approach |
End-of-life Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go
to: https://www.hp.com/go/green.
To recycle your product, please go to: https://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will
be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment
information for each product type for use by treatment facilities. This
information (product disassembly instructions) is posted on the Hewlett
Packard web site at: https://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
|
|
|