|
 DL QuickSpecs
|
DL20
|
|
|
DL60
|
|
|
DL80
|
|
|
DL120
|
|
|
DL140
|
|
|
DL145
|
|
|
DL160
|
|
|
DL160se
|
|
|
DL165
|
|
|
DL180
|
|
|
DL185
|
|
|
DL320
|
|
|
DL325
|
|
|
DL345
|
|
|
DL360
|
|
|
DL365
|
|
|
DL380
|
|
|
DL385
|
|
|
DL388
|
|
|
DL560
|
|
|
DL580
|
|
|
DL585
|
|
|
DL740
|
|
|
DL760
|
|
|
DL785
|
|
|
DL1000
|
|
|
|
ML QuickSpecs
|
ML30
|
|
|
ML110
|
|
|
ML115
|
|
|
ML150
|
|
|
ML310
|
|
|
ML330
|
|
|
ML350
|
|
|
ML370
|
|
|
ML530
|
|
|
ML570
|
|
|
ML750
|
|
|
|
BL QuickSpecs
|
BL10e
|
|
|
BL20p
|
|
|
BL25p
|
|
|
BL260c
|
|
|
BL280c
|
|
|
BL2x220c
|
|
|
BL30p
|
|
|
BL35p
|
|
|
BL40p
|
|
|
BL420c
|
|
|
BL45p
|
|
|
BL460c
|
|
|
BL465c
|
|
|
BL480c
|
|
|
BL495c
|
|
|
BL60p
|
|
|
BL620c
|
|
|
BL660c
|
|
|
BL680c
|
|
|
BL685c
|
|
|
BL860c
|
|
|
|
SL QuickSpecs
|
SL160z
|
|
|
SL165z
|
|
|
SL170s
|
|
|
SL170z
|
|
|
SL230s
|
|
|
SL250s
|
|
|
SL270s
|
|
|
SL2x170z
|
|
|
SL335s
|
|
|
SL390s
|
|
|
SL4540
|
|
|
SL4545
|
|
|
|
XL QuickSpecs
|
XL170r
|
|
|
XL190r
|
|
|
XL220a
|
|
|
XL230a
|
|
|
XL730f
|
|
|
XL740f
|
|
|
XL750f
|
|
|
|
CL QuickSpecs
|
CL1850
|
|
CL1850 G1
| |
CL380
|
|
CL380 G1
| |
|
|
|
|
|
|
 |
Proliant DL145 G3 QuickSpecs |
 US QuickSpecs |
|
|
|
|
|
|
|
|
|
Proliant DL145 G3 Overview
|
HP ProLiant DL145 Generation 3 (G3) | Non-Hot
Plug SATA Models | 
| 
|
| Proliant DL145 G3 Front View: | Proliant DL145 G3 Rear View: | | 1. | Power
Supply | 1. | Low
Profile Riser Board Assembly Slot DL145 G3 Cover | | 2. | 2
AMD Opteron™ 2200 series processors | 2. | Video
Port | | 3. | Full-length
PCI-Express or HTX slot | 3. | Serial
Port | | 4. | Access
panel | 4. | PS/2
Mouse Port | | 5. | Low-profile
PCI-Express or PCI-X slot | 5. | PS/2
Keyboard Port | | 6. |
Memory banks | 6. | Lights
Out 100 10/100 Mbps LAN Port for IPMI Management (RJ45) (Two) | | 7. | System
Fans | | 8. | Front-panel
USB ports | 7. | GbE
LAN Port for NIC 1 and 2 (RJ45) (Two) | | 9. | Power
switch/system status LEDs | 8. | Full-Sized
Riser Board Assembly Slot DL145 G3 Cover | | 10. | 3.5"
Hot-plug SAS/SATA or 3.5" Non-hot plug SATA drive | 9. | Power
Supply | | 11. | 3.5"
Hot-plug SAS/SATA or 3.5" Non-hot plug SATA drive | | | 12. | Optional
CD- or DVD/CDRW drive |
|
| What's New |
- Support for 72 GB, 146 GB and 300 GB Serial-Attached SCSI (SAS) DP Hot Plug Hard Drives
|
|
| At
A Glance |
- Processors:
- Supports up to two AMD Opteron™ 2200 series processors
- Supports up to dual-core 2.8GHz, 1MB cache processors
- Supports DirectConnect Architecture
- Memory:
- 8 DIMM slots supporting up to 32GB REG PC2-5300 DDR2-667 MHz
memory with Advanced ECC
- Internal Drive Support:
- Supports up to two:
- Hot Plug Serial Attached SCSI (SAS) 3.5"/Serial ATA (SATA)
hard drives, or;
- Non-Hot Plug Serial ATA (SATA) 3.5"hard drives
- Internal storage capacity of up to 1.5TB (2 x 750GB hot plug
3.5" SATA hard drives), or 600GB (2 x 300GB hot plug 3.5"
SAS hard drives)
- Network Controller:
- NC326i PCIe Dual Port Gigabit Server Adapter
- Storage Controllers:
- HP Embedded SATA Controller on Non-Hot Plug SATA Models
- HP Smart Array E500/256MB Controller
- HP Smart Array E200 Controller with 64 MB cache, optional
- HP 8 Internal Port SAS HBA with RAID 0,1 on Hot Plug SATA/SAS
Models
- HP SC44Ge Host Bus Adapter
- HP SC11Xe Host Bus Adapter
- Expansion Slots:
- Standard - PCI-Express assembly includes:
- Slot 1: full-length/full height PCI-Express x16
- Slot 2: half-length/low-profile PCI-Express x4 (x8 connector)
- Optional - PCI-X assembly includes:
- Slot 2: half-length/low-profile PCI-X 133 (note: PCI-X slots
are 64 bits; 133 MHz capable)
- Optional - HTX assembly includes: Slot 1: full-length/full height
HTX
- Management:
- IPMI 2.0 support
- HP ProLiant Lights Out 100i Remote Management support
- ROM Setup Utility
- USB Ports:
- Four USB ports (two front, two rear)
- Optical Drive:
- Support for one (optional): CD-ROM, DVD-ROM, DVD RW, DVD/CD RW
- Power Supply:
- 650W Power Supply (Non-Hot Plug, Autoswitching)
- Form Factor:
- Deployment/Serviceability:
- Tool-less access to all system components for easy in rack serviceability
- Warranty:
This product is covered by a global limited warranty and supported
by HP Services and a worldwide network of HP Authorized Channel
Partners. Hardware diagnostic support and repair is available for
one year from date of purchase. Support for software and initial
setup is available for 90 days from date of purchase. Additional
support may be covered under the warranty or available for an additional
fee. Enhancements to warranty services are available through HP
Care Pack services or customized service agreements. Certain restrictions
and exclusions apply. SATA hard drives have a one year warranty.
- Server Warranty includes 1 year Parts,
1 year Labor, 1-year on-site support with next business day response.
Additional information regarding worldwide limited warranty and
technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
|
Standard Features
|
NOTE: For a brief, printer friendly data sheet
that describes this product and informs you of the essential capabilities and
specifications, please visit: https://h71028.www7.hp.com/ERC/downloads/4AA0-8885ENW.pdf
NOTE: For the Standard Features shipped in the "Factory Integrated
Models", please see the "Configuration Information - Factory Integrated
Models" section. | Processor
One of the following depending on Model | AMD
Opteron™ processor Model 2220 (2.8 GHz (95W) | | AMD
Opteron™ processor Model 2218 (2.6 GHz (95W) | | AMD
Opteron™ processor Model 2216 (2.4 GHz (95W) | | AMD
Opteron™ processor Model 2216 HE (2.4 GHz (68W) | | AMD
Opteron™ processor Model 2214 HE (2.2 GHz (68W) | | AMD
Opteron™ processor Model 2210 HE (1.8 GHz (68W) | | AMD
Opteron™ processor Model 2210 (1.8 GHz (95W) |
|
| Upgradeability |
Upgradeable to two processors |
|
| Chipset |
ServerWorks HT2100 and HT1000 |
|
| Cache Memory |
1MB Level 2 cache per core |
|
| Memory Protection |
Memory mirroring with Advanced
ECC capabilities |
|
Memory
One of the following depending on Model
|
Type |
REG PC2-5300 DIMMs
(DDR2-667) |
Standard
(Depending on model)
|
1 GB
2 GB
4 GB |
(2 x 512 MB)
(2 x 1 GB)
(2 x 2 GB) |
| Maximum |
32 GB |
(8 x 4 GB) |
|
| Network
Controller |
NC326i PCIe Dual Port Gigabit
Server Adapter |
|
| Expansion Slots
|
Slot Number
|
Bus Speed
|
Bus Number*
|
Device Number**
|
Hot Plug
(Y/N) |
PCI Voltage
|
Notes
|
|
1
|
x16 PCI-Express
|
3
|
0
|
No |
3.3 volts
|
Full length, full height
|
|
1
|
HTX
|
9
|
1
|
No |
3.3 volts
|
Full length, full height
|
|
2
|
x4 PCI-Express
|
6
|
0
|
No |
3.3 volts
|
Low Profile
|
|
2
|
4-bit, 133MHz PCI-X
|
2
|
1
|
No |
3.3 volts
|
Low Profile
|
| *
Default bus assignment. Inserting cards with PCI bridges may alter the actual
bus assignment number. |
| **
Slots are enumerated differently based on OS. MS OS's enumerate from lowest
to highest Device ID by bus (starting with the lowest bus). |
|
| Storage Controller |
Non-Hot Plug SATA Models |
HP Embedded SATA Controller |
| Hot Plug SATA/SAS Models |
HP 8 Internal Port SAS HBA with
RAID 0,1 |
| NOTE: A diskette
drive is needed to install storage controller drivers during a Windows operating
system installation from CD. |
|
| Storage |
Optical Drives: |
|
| DVD-ROM |
8x IDE (ATAPI) DVD-ROM drive,
slim (optional) |
| DVD/CD RW |
24x IDE (ATAPI) CD-ROM drive
(optional) |
| Diskette Drives |
Via USB only |
| Drive Bays: |
|
| Non-Hot Plug SATA |
Up to 2 non-hot plug SATA 3.5"
drives |
| Hot-Plug SATA/SAS |
Up to 2 hot plug SATA /SAS 3.5"
drives |
|
Maximum
Internal Storage
|
Non-Hot Plug SATA |
1TB |
2 x 500GB |
| Hot Plug SATA |
1.5TB |
2 x 750GB |
| Hot Plug SAS |
600GB |
2 x 300GB |
| Non-Hot Plug SAS |
600GB |
2 x 300GB |
|
| Graphics |
- 32MB shared graphics memory
- 1600x1200x16M maximum resolution
|
|
| Form
Factor |
Rack Mount (1U), (1.75 in/4.45
cm) |
|
| Server Management
Stand Alone Software Product and ProLiant Essentials |
HP Systems Insight Manager |
HP Systems Insight Manager (HP
SIM) provides a unified, secure and extensible standards-based environment
to centrally manage servers, storage and other infrastructure devices, (both
HP and non-HP) across multiple operating system platforms. |
| ProLiant Essentials Rapid Deployment
Pack |
Rapid Deployment Pack (RDP)
extends HP Systems Insight Manager with a complete deployment solution for
HP ProLiant servers. RDP provides a central location to configure server
hardware, deploy Windows, Linux and VMware ESX operating environments and
install HP ProLiant Support Pack drivers using images and scripted profiles.
For more information, visit: https://www.hp.com/go/rdp |
| |
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to: https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information. |
| HP Lights-Out 100i Remote Management |
HP
Lights-Out 100i Remote Management delivers affordable, entry level remote
management capabilities for HP ProLiant 100 Series servers with embedded
LO100i. It allows customers or their service providers to remotely manage
ProLiant 100 Series servers remotely over a LAN or the Internet and consists
of the following:
- LO100i Standard is
embedded remote management and provides basic remote control via telnet,
browser, and IPMI 2.0 and SMASH
- LO100i Select Pack
License are upgrades for essential, secure, remote control, serial console
and virtual media
- LO100i Advanced Pack
License are upgrades for all the features of LO100i Select plus Virtual
KVM (graphical hardware-based, remote console)
|
|
| Core
Infrastructure Management | Subscriber's
Choice | Subscriber's Choice Driver
and Support Alerts/Notifications is a web-based email subscription service that
provides software and driver change notifications for ProLiant products. Sign
up at: https://www.hp.com/go/subscriberschoice
and
customize your profile to receive various new alerts as they become available,
on a weekly or monthly basis. |
| ROMPaq software and latest drivers |
The
latest software, drivers, and firmware fully optimized and tested for your ProLiant
server and options, available through ProLiant Support Packs or downloaded from
software and drivers download pages website at: https://www.hp.com/go/support. |
|
| Industry Standard
Compliance |
ACPI V2.0 Compliant |
| PCI 2.2 Compliant |
| PXE Support |
| WOL Support |
| Microsoft® Logo certifications |
| IPMI 2.0 Compliant |
|
| Manageability |
HP ProLiant Lights Out 100i
Remote Management standard |
|
| Security |
Power-on password |
| Setup password |
|
| Power
Supply |
650 Watts, auto-switching, PFC
(Power Factor Correcting) |
|
| System
Fans |
3 system fans ship standard;
Non-hot plug, Non-redundant |
|
| OS
Support | Microsoft Windows 2003
and Microsoft Windows 2003/R2 Standard Edition (32-bit)
Microsoft Windows
2003 and Microsoft Windows 2003/R2 Enterprise Edition (32-bit)
Microsoft Windows
2003 and Microsoft Windows 2003/R2 Web Edition (32-bit)
Microsoft Windows
2003 and Microsoft Windows 2003/R2 for Extended Systems Standard Edition (64-bit)
Microsoft Windows 2003 and Microsoft Windows 2003/R2 for Extended Systems Enterprise
Edition (64-bit)
Microsoft Windows Server 2008
Red Hat Enterprise Linux
SUSE Linux Enterprise Server |
NOTE: For more
complete and up-to-date information of all supported OSes for ProLiants,
certification information and how to buy server operating systems from HP
please visit the OS product site at: https://h18004.www1.hp.com/products/servers/software/OEM.html
NOTE: For an up-to-date listing of the latest software and drivers
available for your server, please select your server: https://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?lang=en&cc=us&taskId=135
&prodTypeId=15351&prodCatId=241435.. |
|
| Rack
Airflow Requirements | Rack
10000 series Cabinets
The increasing power of new high-performance processor
technology requires increased cooling efficiency for rack-mounted servers. The
10000 Series Racks provide enhanced airflow for maximum cooling, allowing these
racks to be fully loaded with servers using the latest processors.
CAUTION:
If a third-party rack is used, observe the following additional requirements to
ensure adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear
doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed
from top to bottom to permit adequate airflow (equivalent to the required 64 percent
open area for ventilation).
Side: The clearance between the installed rack
component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking
panels to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
NOTE:
For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support
section at the following URL: https://h18000.www.hp.com/products/servers/proliantDL145/index.html
|
|
| Telco Rack Support |
Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack
kit and an additional option kit from Rack Solutions.
https://www.racksolutions.com/hp |
|
| HP Factory Express Capability |
HP Factory Express offers configuration,
customization, integration and deployment services for HP servers and storage
products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking,
installation, complex configuration and design services as well as individual
factory services, such as image loading, asset tagging, and custom packaging.
HP products supported through Factory Express include a wide array of servers
and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem,
HP 9000 servers as well as the MSAxxx, VA7xxx, EVA, XP, rackable tape libraries
and configurable network switches.
For more information on Factory Express services for your specific server
model please contact your sales representative or go to: https://www.hp.com/go/factory-express. |
|
| HP Enterprise Configurator |
The HP eCo-Enterprise Configurator now provides factory default racking
for our HP hardware portfolio. This approach is aligned with our strategic
direction to meet the needs and expectations of our valued customers.
If you require "custom" rack configuration, please contact HP's
Customer Business Center or an Authorized Partner for assistance.
|
|
| Service and Support |
HP Care Pack Services provide total care and support expertise with committed
response designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation,
maintenance and management.
- Support Service -3 Year, 9x5 Next Business Day coverage, excluding
HP holidays only
- Deployment Service - Hardware Installation only
Enhanced Service - Optimize service level to increase IT performance
and availability
- Support Service - 3 Year 13x5 Same Business Day, 4-Hour response
coverage
- Deployment Service - Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.
For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://www.hp.com/go/proliant/carepack
|
HPC Interconnects
| NOTE:
High Performance Computing (HPC) interconnect technologies are available
for the DL145 under the Cluster Platform product portfolio. These high-speed
interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with
the help of configuration tools. Please visit the following URL to configure
HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
https://www.hp.com/techservers/clusters/ucp/index.html |
|
| HPC Interconnects |
InfiniBand |
PCI-X and PCI-Express adapters |
| Gigabit Ethernet |
Use embedded ports |
| Myrinet XP |
PCI-X Rev D, Rev E and Rev F
adapters |
Models
| Non
Hot Plug Serial ATA (SATA) Models | HP
DL145G3 2218 2.6 GHz 2 GB (1P)
411596-001 HP DL145G3 2214 HE 2.2
GHz 2 GB (1P)
411593-001 HP DL145G3 2210 HE 1.8 GHz 1 GB (1P)
411592-001 | Processor(s)
One of the following depending on model
| (1) AMD Opteron™ processor
Model 2218 (2.6 GHz (95W)
(1) AMD Opteron processor Model 2214 HE (2.2 GHz
(68W)
(1) AMD Opteron processor Model 2210 HE (1.8 GHz (68W) |
| Cache Memory | 1
MB Level 2 cache per core | Memory
One of the following depending on model | 1
GB (2 x 512 MB) Registered PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities
2 GB (2 x 1 GB) Registered PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities |
| Network Controller | NC326i
PCIe Dual Port Gigabit Server Adapter | | Storage
Controller | HP Embedded SATA
Controller | | Hard Drive | 80
GB NHP SATA HDD | | Internal
Storage | 1TB maximum (2 x 500
GB Non-Hot plug 3.5" SATA hard drives) | | Optical
Drive | Optional CD/DVD-ROM, DVD/CD
RW | | Form Factor | Rack
Mount (1U) |
|
| Hot
Plug Serial ATA (SATA)/Serial Attached SCSI (SAS) Models | |
HP DL145G3 2220 2.8 GHz 4 GB (1P)
440719-001
HP DL145G3
2218 2.6 GHz 4 GB (1P)
411599-001 HP DL145G3 2214 HE 2.2 GHz
2 GB (1P)
411597-001 | Processor(s)
One of the following depending on model | (1)
AMD Opteron™ processor Model 2220 (2.8 GHz (95W)
(1) AMD Opteron processor
Model 2218 (2.6 GHz (95W)
(1) AMD Opteron processor Model 2214 HE (2.2 GHz
(68W) | | Cache Memory | 1
MB Level 2 cache per core | Memory
One of the following depending on model | 2
GB (2 x 1 GB) PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities
4 GB (2 x 2 GB) PC2-5300 DDR2 DIMMs (667 MHz) with Advanced ECC capabilities |
| Network Controller | NC326i
PCIe Dual Port Gigabit Server Adapter | | Storage
Controller | HP 8 Internal Port
SAS HBA with RAID | | Hard
Drive | None ship standard (up
to 2 Hot Plug SATA or SAS drives supported) | | Internal
Storage | 1.5TB max. (2 x 750
GB Hot Plug 3.5" SATA hard drives)
or 600 GB (2 x 300 GB Hot Plug 3.5"
SAS hard drives) | | Optical
Drive | Optional CD/DVD-ROM, DVD/CD
RW | | Form Factor | Rack
Mount (1U) | | Availability | Hot
Plug Hard Drives |
Configuration Information - Factory Integrated Models
|
NOTE: This section lists some of the steps required to configure a Factory
Integrated Model. To ensure only valid configurations are ordered, HP recommends
the use of an HP approved configurator. Contact your local sales representative
for additional information. Contact your local sales representative for information
on CTO product offerings and requirements.
NOTE: HP does not allow
factory integration of options into standard models listed above.
Configure-to-order
servers must start with a CTO Chassis.
NOTE: This product offering
does not support HP Factory Express Server Configuration Level 1.
NOTE:
FIO indicates that this option is a Factory Installable Option. | |
| Step 1: Base Configuration |
| | | Non-Hot
Plug Model | |
| HP ProLiant DL145 G3 Non- Hot Plug
SATA Rack Chassis | 411588-B21 |
| Factory Integrated Model ships
with: | |
| NC326i PCIe Dual Port Gigabit
Server Adapter | |
| Two available PCI-Express slots,
including one full-length/full height and one low-profile/half height slot |
| | HP
Embedded SATA Controller | |
| 650 Watt Power Supply |
| | | |
| 3 Non-Hot Plug Blowers | |
| Rack (1U), (1.75 in / 4.45 cm) | |
| Hot Plug Model |
| | HP
ProLiant DL145 G3 Hot Plug SATA/SAS Rack Chassis |
411590-B21 | | Factory
Integrated Model ships with: |
| | NC326i
PCIe Dual Port Gigabit Server Adapter |
| | One
available PCI-Express slot, (full-length/full height), the low-profile/half height
slot houses the SATA/SAS storage controller |
| | One
HP 8 Internal Port SAS Host Bus Adapter with RAID |
| | One
HP SATA/SAS Host Cable Kit | |
| One Hot Plug Backplane Option
Kit | |
| 650 Watt Power Supply | |
| | |
| 3 Non-Hot Plug Blowers | |
| Rack (1U), (1.75 in / 4.45 cm) | |
|
| Step
2: Choose Required Options (only one of the following from each list unless otherwise
noted) | |
Base Processors | AMD Opteron™ processor
Model 2220 (2.8 GHz (95W)
NOTE: If
2 processors are desired, select one 440721-B21 and one 440721-B21. |
440721-B21 | AMD
Opteron™ processor Model 2218 - 2.6 GHz (95W)
NOTE:
If 2 processors are desired, select one 411606-B21 and one 411606-B21. |
411606-B21 | AMD
Opteron™ processor Model 2216 - 2.4 GHz (95W)
NOTE:
If 2 processors are desired, select one 435014-B21 and one 435014-B21. |
435014-B21 | AMD
Opteron™ processor Model 2216 HE - 2.4 GHz (68W)
NOTE:
If 2 processors are desired, select one 411616-B21 and one 411616-B21. |
411616-B21 | AMD
Opteron™ processor Model 2214 HE - 2.2 GHz (68W)
NOTE:
If 2 processors are desired, select one 411605-B21 and one 411605-B21. |
411605-B21 | AMD
Opteron™ processor Model 2212 - 1.8 GHz (95W)
NOTE:
If 2 processors are desired, select one 411615-B21 and one 411615-B21. |
411615-B21 | AMD
Opteron™ processor Model 2210 HE - 1.8 GHz (68W)
NOTE:
If 2 processors are desired, select one 411604-B21 and one 4116045-B21. |
411604-B21 |
|
|
Base Memory | 1 GB PC2-5300 DDR2
(2 x 512 MB) Kit, single rank |
| | 2
GB PC2-5300 DDR2 (2 x 1 GB) Kit, single rank |
| | 4
GB PC2-5300 DDR2 (2 x 2 GB) Kit, dual rank |
| | 8
GB REG PC2-5300 (2 x 4 GB) Kit, dual rank |
|
|
| Hard Drives |
Serial-ATA (SATA) Non-Hot Plug
Hard Drives (Non-Hot Plug Models Only) |
|
| HP 80GB 1.5G SATA 7.2K NHP 3.5"
HDD |
|
|
HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD |
|
| HP 250GB 1.5G SATA 7.2K NHP 3.5"
HDD |
|
| HP 500GB 1.5G SATA 7.2K NHP 3.5"
HDD, FIO* |
404469-B21 |
| *Factory
Integrated Only |
|
| Serial-ATA (SATA) Hot Plug
Hard Drives (SATA/SAS Hot Plug Models Only) |
|
| HP 80GB SATA 7.2K Hot Plug 3.5"
HDD |
|
| HP 160GB SATA 7.2K Hot Plug 3.5"
HDD |
|
| HP 250GB SATA 7.2K Hot Plug 3.5"
HDD |
|
| HP 500GB SATA 7.2K Hot Plug 3.5"
HDD |
|
| HP 750GB SATA 7.2K Hot Plug 3.5"
HDD |
|
| Serial-Attached SCSI (SAS)
Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only) |
|
| HP 72GB 3G SAS 15K 3.5" DP
HDD |
|
| HP 72GB SAS 15K Hot Plug 3.5"
SP HDD |
|
| HP 146GB 3G SAS 15K 3.5"
DP HDD |
|
| HP 146GB SAS 15K Hot Plug 3.5"
SP HDD |
|
| HP 300GB 3G SAS 15K 3.5"
DP HDD |
|
| HP 300GB SAS 15K Hot Plug 3.5
SP HDD |
|
| NOTE: The purchase
of SAS HBA or array controller is required. |
|
| Storage Controller |
HP SC44Ge Host Bus Adapter |
|
HP 8 Internal Port SAS HBA with
RAID
NOTE: For use with Hot Plug SATA/SAS models only
NOTE: The selection of the HP 8 Internal Port SAS HBA with RAID requires
the purchase of the PCI-X Riser Option kit (P/N 411625-B21) |
|
HP SATA/SAS Host Cable Kit
NOTE: For use with Hot Plug SATA/SAS models only |
389650-B21 |
HP Smart Array E500/256MB Controller
NOTE: Selection of the E500 with
the E200 will prevent installation of the E500 battery-backed write cache
module. |
|
HP Smart Array E200/128 BBWC Controller
NOTE: Selection of the E500 with
the E200 will prevent installation of the E500 battery-backed write cache
module. |
|
| HP HTX Riser Board Kit |
411627-B21 |
| HP PCI-X Riser Board Kit |
411625-B21 |
| Hot Plug Backplane Option Kit |
411623-B21 |
HP Single Channel U320 SCSI Controller
NOTE: The selection of the 64-Bit/133-MHz Single Channel Ultra 320 SCSI
HBA G2 requires the purchase of the PCI-X Riser Option kit (P/N 411625-B21) |
|
|
| Step 3: Choose Additional Options
for Factory Integration |
| NOTE: For additional
options, please refer to the "Options" section below. Some options
may not be available for factory integration. Please contact an HP sales
representative for additional information. |
Options
Server Management
Stand Alone Software Product – ProLiant Essentials
|
NOTE: Electronic
licensing options are available for Insight Control suites and select ProLiant
Essentials software products. Please see the appropriate Insight Control
and ProLiant Essentials QuickSpecs for additional information. |
|
| Deploy |
|
| ProLiant Essentials Rapid Deployment
Pack |
|
ProLiant Essentials Rapid Deployment
Pack No Media 1-Server License including 1 year of 24x7 Technical Support
and Updates
NOTE: This license allows 1 server
to be deployed and managed via RDP |
452151-B21
|
| NOTE: For additional
ProLiant Essentials Rapid Deployment Pack License Kits please see the QuickSpecs
at: https://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html |
|
NOTE: Flexible
and volume quantity license kits are available for ProLiant Essentials Value
Packs. Refer to: https://www.hp.com/servers/proliantessentials
or the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: For more information regarding ProLiant Essentials Software,
please see the following URL: https://www.hp.com/servers/proliantessentials. |
|
| Control |
|
| Integrated Lights-Out 100i
Select Pack and Advanced Pack |
|
| HP Lights Out 100i Select Pack
1-Server License |
413111-B21
|
| HP Lights Out 100i Advanced Pack
1-Server License |
413115-B21
|
| NOTE: For additional
ProLiant Integrated Light-Out Select Pack and Advanced Pack License Kits
please see the QuickSpecs at: https://h18000.www1.hp.com/products/quickspecs/12087_na/12087_na.html |
|
|
|
Processor | AMD Opteron™ processor
Model 2220 (2.8 GHz (95W) | 440721-B21 |
| AMD Opteron™ processor Model
2218 - 2.6 GHz (95W) | 411606-B21 |
| AMD Opteron™ processor Model
2216 - 2.4 GHz (95W) | 435014-B21 |
| AMD Opteron™ processor Model
2216 HE - 2.4 GHz (68W) | 411616-B21 |
| AMD Opteron™ processor Model
2214 HE - 2.2 GHz (68W) | 411605-B21 |
| AMD Opteron™ processor Model
2210 - 1.8 GHz (95W) | 411615-B21 |
| AMD Opteron™ processor Model
2210 HE - 1.8 GHz (68W) | 411604-B21 |
|
|
Hard Drives | Serial-ATA
(SATA) Non-Hot Plug Hard Drives (Non-Hot Plug Models Only) |
| HP 80GB 1.5 G SATA 7.2K NHP 3.5"
HDD | |
| HP 160GB 1.5 G SATA 7.2K NHP
3.5" HDD | |
| HP 250GB 1.5 G SATA 7.2K NHP
3.5" HDD |  411276-B21 |
| NOTE:
When purchasing systems with the 500 GB Non-Hot Plug SATA drives, please reference
the Configuration Information Section of this QuickSpecs to order via Configuration
to Order. | |
| Serial-ATA (SATA) Hot
Plug Hard Drives (SATA/SAS Hot Plug Models Only) | | HP
80 GB SATA 7.2K Hot Plug 3.5" HDD | 349237-B21 |
| HP 160 GB SATA 7.2K Hot Plug
3.5" HDD | 349238-B21 |
| HP 250 GB SATA 7.2K
Hot Plug 3.5" HDD | 349239-B21 |
| HP 500 GB SATA 7.2K Hot Plug
3.5" HDD | 395473-B21 |
| HP 750 GB SATA 7.2K Hot Plug
3.5" HDD | 432341-B21 |
| Serial-Attached
SCSI (SAS) Hot Plug Hard Drives (SATA/SAS Hot Plug Models Only) |
| HP 72 GB 3G SAS 15K 3.5"
DP HDD | 384852-B21 |
| HP 72 GB SAS 15K Hot Plug 3.5"
SP HDD | 375870-B21 |
| HP 146 GB 3G SAS 15K 3.5"
DP HDD | 384854-B21 |
| HP 146 GB SAS 15K Hot Plug 3.5"
SP HDD | 375872-B21 |
| HP 300 GB 3G SAS 15K 3.5"
DP HDD | 416127-B21 |
| HP 300 GB SAS 15K Hot Plug 3.5
SP HDD | 431944-B21 |
| NOTE: The purchase
of SAS HBA or array controller is required. | |
|
| Graphic Cards |
NVIDIA Quadro FX3500 256MB PCIe
|
435681-B21
|
| NVIDIA Quadro FX1500 256MB PCIe |
435703-B21
|
| NOTE:
At this time, these graphic cards are supported on Linux and Windows. |
|
|
| Optical Drives |
DVD-ROM Drive (optional) |
432878-B21
|
| DVD/CD RW Drive (optional) |
432880-B21
|
Multibay II DVD/CD-RW Combo Drive
NOTE: When purchasing the Multibay
II DVD/CD-RW Combo Drive, (P/N PA850A), the USB 2.0 Multibay II Cradle (P/N
PA509A) is required. |
PA850A
|
USB 2.0 MultiBay II Cradle, External
NOTE: When purchasing the Multibay
II DVD/CD-RW Combo Drive, (P/N 850A), the USB 2.0 Multibay II Cradle, (P/N
PA509A) is required. |
PA509A
|
|
| Storage Controllers |
HP SC44Ge Host Bus Adapter |
|
| HP SC11Xe Host Bus Adapter |
|
HP 8 Internal Port SAS HBA with
RAID
NOTE: For use with Hot Plug SATA/SAS
models only
NOTE: The selection of the HP 8 Internal Port SAS HBA with RAID requires
the purchase of the PCI-X Riser Option kit (P/N 411625-B21). |
|
HP SATA/SAS Host Cable Kit
NOTE: For use with Hot Plug SATA/SAS
models only. |
389650-B21
|
HP Smart Array E500/256MB Controller
NOTE: Selection of the E500 with
the E200 will prevent installation of the E500 battery-backed write cache
module. |
|
HP Smart Array E200/128 BBWC Controller
NOTE: Selection of the E500 with
the E200 will prevent installation of the E500 battery-backed write cache
module. |
|
| HP HTX Riser Board Kit |
411627-B21 |
| HP PCI-X Riser Board Kit |
411625-B21 |
| Hot Plug Backplane Option Kit |
411623-B21 |
64-Bit/133-MHz Single Channel
Ultra320 SCSI HBA G2
NOTE: The selection of the 64-Bit/133-MHz
Single Channel Ultra 320 SCSI HBA G2 requires the purchase of the PCI-X
Riser Option kit (P/N 411625-B21) |
374654-B21 |
|
|
Communications | HP NC110T PCI Express
Gigabit Server Adapter
NOTE: Does
not support Windows 2000. | 434905-B21 |
| HP NC360T PCI Express Dual Port
Gigabit Server Adapter | 412648-B21 |
HP NC364T PCI Express Quad Port
Gigabit Server Adapter
NOTE: Does not
support Windows 2000. | 435508-B21 |
| HP NC373F PCI Express Multifunction
Gigabit Server Adapter | 394793-B21 |
| HP NC373T PCI Express Multifunction
Gigabit Server Adapter | 394791-B21 |
HP NC380T PCI Express Dual Port
Multifunction Gigabit Server Adapter
NOTE: Supported on a Full Length-Full
Height slot only. |
394795-B21 |
HP NC510C PCIe 10 Gigabit Server
Adapter
NOTE: A minimum of 1 gigabyte
(1 GB) of server memory is required per each NC510C adapter. | 414129-B21 |
HP NC510F PCIe 10 Gigabit Server
Adapter
NOTE: A minimum of 1 gigabyte
(1 GB) of server memory is required per each NC510F adapter. | 414126-B21 |
|
| HPC Specific Options |
InfiniBand 4X PCI-E Dual Port
Host Adapter |
380298-B21 |
| HP IB 4X DDR PCI-e Dual Port 0
Memory HCA |
483513-B21 |
| HP IB 4X DDR PCI-e Dual Port HCA |
448397-B21 |
| HP IB 4X DDR PCI-e Dual Port HCA
|
409376-B21 |
| Myrinet PCI 2XP Rev-E 4MB Network
Interface Card |
373983-B21 |
| Myrinet 2XP PCI-X, Fiber F-Series,
2MB NIC |
390456-B21 |
| NOTE: For HPC
interconnect adapters please see the HPC Interconnect section of this QuickSpecs. |
|
|
| Rack Kits |
1U Cable Management Arm
NOTE: Package contains two cable
management arms. |
365403-B21 |
|
|
Tape Drives | USB Tape Drives | |
| HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 72 USB Tape Drive | AG594A |
| HP StorageWorks 1U USB Rack-Mount
Kit with one DAT 160 USB Tape Drive | AG703A |
| Ultrium External Tape Drives | |
HP StorageWorks LTO-1 Ultrium
232 Internal Tape Drive (Carbonite)
NOTE:
HP recommends combining this tape drive with the 1U SCSI Rack-Mount kit ( A7445B)
for a complete rack-mount solution. | DW064A |
| Rack-Mount Tape Drive | |
HP StorageWorks 1U SCSI Rack-Mount
kit
NOTE: The 1U Rack-Mount Kit can
support up to (2) half-height tape drives and is compatible with multiple Single-Ended
and LVD SCSI tape drives including the DAT 40, DAT 72, DAT 160, DLT VS160, LTO-1
Ultrium 232, LTO-2 Ultrium 448 and LTO-3 Ultrium 920 tape drives. | A7445B |
HP StorageWorks 1U USB Rack-Mount
Kit
NOTE: The 1U USB Rack-Mount Kit
can support up to (2) half-height tape drives and is compatible with the DAT 40
USB, DAT 72 USB and DAT 160 USB tape drives. | A8007A |
NOTE: When attaching
to an external tape drive, autoloader or library, you must also purchase a HBA
NOTE: For a complete listing of HP tape drive offerings supported with
the DL145 G3, visit https://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html | |
|
|
HP D2D Backup System | HP StorageWorks
D2D110 Backup System
NOTE: 1TB of Disk
Storage |
EH880A | HP
StorageWorks D2D110 Backup System with Data Protector Express Software Kit
NOTE: 1TB of Disk Storage |
EH923A | HP
StorageWorks D2D120 Backup System
NOTE:
2TB of Disk Storage |
EH884A | HP
StorageWorks D2D120 Backup System with Data Protector Express Software Kit
NOTE: 2TB of Disk Storage |
EH924A |
HP StorageWorks D2D130 Backup System
NOTE: 3TB of Disk Storage.
|
EH950A |
HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit
NOTE: 3TB of Disk Storage.
|
EH951A |
HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.
|
EH952A |
NOTE:
Please see the HP D2D Backup Systems QuickSpecs for additional information:
https://h18000.www1.hp.com/products/quickspecs/12651_na/12651_na.html |
|
|
| StorageWorks Options |
StorageWorks Fibre Channel HBA |
|
| NOTE:
The following is a list of all Fibre Channel Host Bus Adapters for Windows
and Linux. For detailed compatibility information please see: https://h18006.www1.hp.com/storage/saninfrastructure/hba.html |
|
| HP StorageWorks 81Q PCI-e FC HBA |
|
| HP StorageWorks FC2214DC 2 Gb,
Dual Port, 64-Bit/133 MHz PCI-X HBA |
|
| HHP StorageWorks 2 Gb, Single
Channel, 133 MHz PCI-X HB |
A7388A
|
| HP StorageWorks 2 Gb, Dual Channel,
133 MHz PCI-X HBA |
A7387A
|
| HP StorageWorks FC2142SR 4Gb PCI-e
HBA |
|
| HP StorageWorks FC2242SR Dual
Channel 4 Gb PCI-e HBA |
|
| HP StorageWorks FC1142SR 4Gb PCI-e
HBA |
|
| HP StorageWorks FC1242SR Dual
Channel 4 Gb PCI-e HBA |
|
| HP StorageWorks FC2143 4Gb PCI-X
2.0 - to Fibre Channel HBA |
|
| HP StorageWorks FC2243 Dual Channel
4Gb PCI-X 2.0 HBA |
|
| StorageWorks SCSI HBA |
|
| HP U320e SCSI Host Bus Adapter |
|
| NOTE: Recommended
Dual Channel Ultra320 SCSI Controller for connecting multi-drive MSL tape
libraries to ProLiant servers. |
|
| StorageWorks Connection Kit |
|
| HP StorageWorks 8Gb Simple SAN
Connection Kit |
AK241A |
| StorageWorks Fibre Channel Switch |
|
| HP StorageWorks 8/20q Fibre Channel
Switch |
AK242A |
|
| USB Options |
HP 1GB USB 2.0 Floppy Drive Key |
442085-B21
|
| HP 256MB USB 2.0 Floppy Drive
Key |
442084-B21
|
| HP USB-P/S2 Mouse
|
DC369A
|
| HP Keyboard (USB) standard 2004
|
DT528A#
|
| USB 1.44-MB External Diskette
Drive |
DC361B
|
|
|
HP KVM Switch Options | HP 1x4 Console
Switch | AF611A |
| HP PS2 Server Console Cable,
6 foot, 2-Pack |
AF612A | HP USB Server
Console Cable, 6 foot, 2-Pack
NOTE: required
for supporting USB peripheral | AF613A |
| NOTE:
For additional information regarding KVM switches, Serial Console servers, rack
mount monitors, keyboards and all related options please see the following URL:
https://www.hp.com/go/kvm | |
|
|
HP Serial Console Server Options | HP
16 Port Serial Console Server (worldwide) | AF101A |
| HP 48 Port Serial Console Server
(worldwide) | AF102A |
| Serial Adapter, RJ45-D89 DCE
Female, 1-pack | AF103A |
| Serial Adapter, RJ45-D89 DCE
Female, 8-pack | AF110A |
| NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables can
be found at the following URL: https://www.hp.com/go/kvm | |
| NOTE:
For
additional information regarding KVM switches, Serial Console servers, rack mount
monitors, keyboards and all related options please see the following URL: https://www.hp.com/go/kvm | |
| 2x1x16 IP Console Switch with
Virtual Media | AF601A |
| 4x1x16 IP Console Switch with
Virtual Media | AF602A |
| 2x16 Server Console Switch with
Virtual Media | AF600A |
PS/2 Virtual Media Interface
Adapter, 1 pack
NOTE: Requires PS/2
and one USB port on server. | AF604A |
|
| Service
and Support Offerings (HP Care Pack Services) |
Hardware Services 4-Hour On-site
Service |
|
| 13-Hour x 5-Day Coverage, 3 Years,
Electronic |
U9509E
|
| Hardware Services Next Business
Day On-Site Service |
|
| 9-Hour x 5-Day Coverage, 3 Years,
Electronic |
U9508E
|
| Hardware Services 6-Hour Call
to Repair On-Site Service |
|
| Hardware Installation, Electronic |
U9520E
|
| NOTE: For more
information, customer/resellers can contact https://www.hp.com/services/carepack |
|
Memory
| NOTE:
Memory configurations listed do not apply to "Factory Integrated Models". |
| HP ProLiant DL145
G3 (all models) |
Standard Memory
1 GB (2 x 512 MB) PC2-5300 DIMM memory, with Advanced ECC Capabilities memory
installed.
2 GB (2 x 1 GB) PC2-5300 DIMM memory, with Advanced ECC Capabilities memory
installed.
4 GB (2 x 2GB) PC2-5300 DIMM memory, with Advanced ECC Capabilities memory
installed.
Maximum Memory
Up to 32GB memory is available with the optional installation of PC2-5300
Registered DIMM memory kits.
Memory should be installed in pairs and matched for optimum performance. |
| |
| NOTE:
Chart does not represent all possible memory configurations. |
|
DL145 G3 Memory |
Slot | | |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 | | Standard
(1 GB) | 512
MB | 512
MB | Empty |
Empty |
Empty |
Empty |
Empty |
Empty | | Standard
(2 GB) | 1
GB | 1
GB | Empty |
Empty |
Empty |
Empty |
Empty |
Empty | | Standard
(4 GB) | 2
GB | 2
GB | Empty |
Empty |
Empty |
Empty |
Empty |
Empty | | Maximum
(32 GB) | 4
GB | 4
GB | 4
GB | 4
GB | 4
GB | 4
GB | 4
GB | 4
GB |
Storage
|
|
1,2 | Two Non-hot plug SATA or
Two 3.5" Hot Plug SATA/SAS Hard Drive Bays | |
A | Optional CD-ROM, DVD-ROM, DVD/CD
RW |
|
Drive Support |
| | Removable
Media | | | |
| |
Quantity
Supported |
Position
Supported |
Controller
| |
DVD-ROM |
Up to 1 |
3 | Integrated IDE (ATAPI)
(optional) | | DVD/CD
RW | Up to 1 |
3 | Integrated IDE (ATAPI)
(optional) |
|
|
DL145 G3 Hard Drives | | SATA
- Non-Hot Plug | | |
Quantity
Supported |
Position
Supported |
Controller
| | 3.5-inch | | | |
| 80 GB 7,200 rpm |
Up to 2 |
1;2 | HP
Embedded SATA Controller | | 160
GB 7,200 rpm | Up
to 2 | 1;2
| HP Embedded SATA Controller
| | 250 GB 7,200 rpm | Up
to 2 | 1;2
| HP Embedded SATA Controller
| | 500 GB 7,200 rpm | Up
to 2 | 1;2
| HP Embedded SATA Controller
|
|
| SATA/SAS
Hot Plug | | |
Quantity
Supported |
Position
Supported |
Controller
| 3.5-inch
80 GB SATA 7,200 rpm
160 GB SATA 7,200 rpm
250 GB SATA 7,200 rpm
500
GB SATA 7,200 rpm
750 GB SATA 7,200 rpm | Up
to 2 | 1;2 | HP
8 Internal Port SAS HBA with RAID | SAS
Hot Plug
72 GB SAS 15,000 rpm
146 GB SAS 15,000 rpm
300 GB
SAS 15,000 rpm | Up
to 2 | 1;2 | HP
8 Internal Port SAS HBA with RAID |
|
|
For supported tape drive offerings for this ProLiant server see the following: |
| |
Position
Supported |
Controller |
Controller/HBA Option Kit Part Number |
HP StorageWorks USB Tape, External
DAT 72 USB
DAT 160 USB
1U USB Rack-Mount Kit |
External |
USB 2.0 Port |
N/A | | | |
| |
HP StorageWorks SCSI
Tape
DAT 72
DAT 160
1U SCSI Rack-Mount Kit |
External |
HP SC44Ge Host Bus Adapter |
416096-B21 | | | |
| |
HP StorageWorks D2D
Backup Systems
D2D110
D2D120
D2D130 |
External |
Embedded Network Controller
|
N/A |
Power Specifications
| Spare
Kit | 434418-001 |
| Operational Input Voltage Range (Vrms) |
90Vac to 264Vac full range at 25oC ambient | | Frequency
Range (Nominal) (Hz) | 47 Hz to
63 Hz | | Power Output | 650W
Nominal | | Server Power
Cords | High voltage power cord
ships standard with all part numbers.
NOTE:
ProLiant DL servers no longer ship standard with NEMA power cords (187335-001)
that allow connection to 110V US wall outlets in a home or office. ProLiant DL
servers are primarily connected to PDU's in data center racks so they now ship
standard with only a PDU power cord (416151-B21). If a user wishes to power a
ProLiant DL server using a 110V receptacle (NEMA-15), the NEMA power cord (187335-001)
must be ordered separately. | | Standard
Power Cord Part Number | 307348-B21 |
| Optional Power Cord Part Number | 307372-001 |
Quickspecs
| System Unit |
Dimensions (HxWxD) |
1.70 x 16.78 x 26.53
in (4.32 x 42.62 x 67.39 cm) |
| Weight (approximate; fully
configured) |
40 lb (18.14 kg) |
|
Input Requirements
(per power supply) |
Range Input Voltage |
90 to 140 VAC/180 to 264 VAC |
| Normal Line Voltage |
115 or 230 VAC |
| Line Frequency |
47 to 63 Hz
|
|
| Rated Input Current load |
7.1A at 115VAC, 3.6A
at 230VAC |
| BTU Rating |
BTU-Hr (max configuration) |
2371 |
| Power Supply Output Power
(per power supply) |
Rated Steady-State Power |
650W |
| Temperature Range |
Operating |
50° to 93° F (10°
to 35° C) |
| Shipping |
-40° to 158° F (-40°
to 70° C) |
|
Relative Humidity
(non-condensing)
|
Operating |
10% to 90% |
| Non-operating |
5% to 95% |
| Acoustic Noise |
Idle (Fixed Disk Drives
Spinning)
|
|
L WAd (BELS)
|
|
Operating
(Random Seeks to Fixed Disks) |
|
L WAd (BELS)
|
<6.4 |
|
| Non-Hot
Plug SATA Hard Drives |
80-GB 7.2K
383410-B21 | Capacity |
80027 MB | | Height |
1.028 in (2.61 cm) | | Width |
4.0 in (10.16 cm) | | Interface |
SATA 100 | Transfer
Rate Synchronous
(Maximum) | 100
MB/s | | Seek
Time (typical reads, including settling) | Single
Track | | | Average | |
| Full-Stroke | |
| Rotational Speed | |
| Physical Configuration | Bytes/Sector | |
| Logical Blocks | |
| Operating Temperature | 41°
to 131° F (5° to 55° C) |
|
| Embedded SATA Controller |
Drives Supported |
Up to 2 SATA devices
|
| Channels |
2 (SATA Drives) |
| Storage Capacity |
1.5 TB internal storage |
| Data Transfer Method |
32-bit/33-MHz PCI
bus-master |
| Maximum SATA Channel Transfer
Rate |
100 MB/s per channel |
| Maximum Transfer Rate per PCI
Bus (peak) |
266 MB/s per channel |
| Protocols |
SATA |
| PIO Mode[0-4] |
| Cable |
SATA |
| Internal ATA Connectors |
Two SATA Connectors
(primary and secondary) |
|
HP 8 Internal Port SAS HBA with RAID
( 347786-B21) | Drives
Supported | Up to 2 SATA/SAS
drives | | Channels | 8 |
| Storage Capacity | 600
GB | | Data Transfer
Method | 64-bit/133MHz PCI-X |
| Maximum Host Bus Transfer
Rate | 1.06 Gb/sec |
| Maximum SAS transfer rate | 300
MB/sec per port | Protocols
Supported
| SSP, STP, SMP |
| Internal Connectors | 2
SAS |
|
| NC326i
PCIe Dual Port Gigabit Server Adapter | Network
Interface | 10Base-T/100Base-TX/1000Base-TX |
| Compatibility | IEEE
802.3 10Base-T | | IEEE
802.3 1000Base-T | | IEEE
802.3 100Base-TX | | Data
Transfer Method | 64-bit,
133MHz PCI(X)1.0 | | Network
Transfer Rate | 10Base-T
(Half-Duplex) | 10 Mb/s |
| 10Base-T (Full-Duplex) | 20
Mb/s | | 100Base-TX (Half-Duplex) | 100
Mb/s | | 100Base-TX (Full-Duplex) | 200
Mb/s | 1000Base-TX
(Half
and Full-Duplex) | 2000
Mb/s | | Connector | RJ-45 | |
| Cable Support | 10Base-T | Categories
3, 4 or 5 UTP; up to 328 ft (100 m) | | 10/100/1000Base-TX | Category
5 UTP (2 Pair); up to 328 ft (100 m) |
|
| Environment-friendly
Products and Approach | End-of-life
Management and Recycling |
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green.
To recycle your product, please go to: https://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner. The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment. |
|
|
