• Support for:
  • Quad-Core Intel® Xeon® processor X5365 (3.0 GHz, 120 W, 1333MHz Front Side Bus FSB)
  • Quad-Core Intel® Xeon® processor L5335 (2.00 GHz, 50 W, 1333MHz FSB, Low Voltage)

• Processors:
  • Supports up to two Quad-Core and Dual-Core Intel® Xeon® processors: 5300 and 5100 sequence
    • Quad-Core Intel® Xeon® processors 5300 sequence with 8MB Level 2 cache
    • Dual-core Intel® Xeon® processor 5100 sequence with 4MB Level 2 cache
  • Intel® 5000X Chipset
• Memory:
  • Supports up to 32 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) with Advanced ECC
• Internal Drive Support:
  • Supports up to two:
    • Non-Hot Plug Serial ATA (SATA) 3.5"hard drives; or
    • Hot Plug Serial Attached SCSI (SAS/Serial ATA (SATA) 3.5"hard drives
  • Internal storage capacity of up to 1.5TB (2 x 750GB Hot Plug 3.5" SATA hard drives), 1 TB (2 x 500 Non-Hot Plug SATA hard drives) or 600GB (2 x 300GB Hot Plug 3.5" SAS hard drives)
• Network Controller:
  • Two embedded NC320i PCIe Gigabit Server Adapters
• Storage Controllers:
  • HP Embedded SATA RAID Controller on Non-Hot Plug SATA Models
  • HP 8 Internal Port SAS HBA with RAID 0,1 on Hot Plug SAS/SATA Models
  • HP Smart Array E500 Controller
  • HP Smart Array E200 Controller
  • HP SC11Xe Host Bus Adapter
  • HP SC44Ge Host Bus Adapter
• Expansion Slots:
  • Non-Hot Plug Models:
    • Two available PCI Express slots:
      • Slot 1: full-length/full-height PCI-Express x16
      • Slot 2: low-profile/half-height PCI-Express x8
  • Hot Plug Models:
    • One available PCI-Express slot:
      • Slot 1: full-length/full-height PCI-Express x16
      • Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller
• Management:
  • IPMI 2.0 support
  • HP Lights Out 100i Remote Management with new licensed key activated upgrades for Virtual KVM and virtual media support
  • ROM Setup Utility
• USB Ports:
  • Four USB ports (two front, two rear)
• Optical Drive:
  • Support for one (optional): CD-ROM, DVD-ROM, DVD RW, DVD/CD RW
• Power Supply:
  • 650W Power Supply (Non-Hot Plug, Autoswitching)
• Additional Features:
  • Support for:
    • NVIDIA Quadro FX3500 256MB PCIe graphics card
    • NVIDIA Quadro FX1500 256MB PCIe graphics card
• Form Factor:
  • 1U rack models
• Deployment/Serviceability:
  • Tool-less access to all system components for easy in rack serviceability
• Warranty: This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions and exclusions apply. SATA hard drives have a one year warranty.
  • Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

2

HP Lights-Out 100i Remote Management delivers affordable, entry level remote management capabilities for HP ProLiant 100 Series servers with embedded LO100i. It allows customers or their service providers to remotely manage ProLiant 100 Series servers remotely over a LAN or the Internet and consists of the following:

• LO100i Standard is embedded remote management and provides basic remote control via telnet, browser, and IPMI 2.0 and SMASH
• LO100i Select Pack License are upgrades for essential, secure, remote control, serial console and virtual media
• LO100i Advanced Pack License are upgrades for all the features of LO100i Select plus Virtual KVM (graphical hardware-based, remote console)

HP Lights-Out 100i Standard providing the following OS-independent remote control capabilities:

• Virtual power
• System event log access
• System health
• Remote Serial console (serial redirection)
• Browser, Telnet access
• SM-CLP compliant
• IPMI 2.0 compliant

HP Lights-Out 100i Select Pack providing license key activated upgrades to the following:

• Virtual media (Floppy and CD)
• Secure Socket Layer Encryption
• Secure Shell Encryption

HP Lights-Out 100i Advanced Pack providing license key activated upgrades to the following:

• Virtual KVM (KVM over IP functionality embedded on the system board) plus all of the LO100i Select Pack features above.

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD provided with the server, or to the server documentation located in the Support section at the following URL: www.hp.com/servers/dl140.

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: https://www.hp.com/go/factory-express.

The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance.

HP Care Pack Services provide total care and support expertise with committed response designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

• Support Service -3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
• Deployment Service - Hardware Installation only

Enhanced Service - Optimize service level to increase IT performance and availability

• Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
• Deployment Service - Installation and Start-up only

Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.

For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://www.hp.com/go/proliant/carepack

HP DL140G3 E5345 417748-001

HP DL140G3 E5310
417746-001

HP DL140G3 5160
417759-001

HP DL140G3 5140
417757-001

HP DL140G3 5110
417756-001

HP DL140G3 E5345
417749-001

HP DL140G3 E5310
417747-001

HP DL140G3 5160
417755-001

HP DL140G3 5140
417754-001

HP DL140G3 5110
417753-001

Two embedded NC320i PCIe Gigabit Server Adapters

Two available PCI-Express slots:

Slot 1: full-length/full-height PCI-Express x16
Slot 2: low-profile/half-height PCI-Express x8

(NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100; Slot 2: low-profile/half-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server)

One available PCI-Express slot:

Slot 1: full-length/full-height PCI-Express x16
Slot 2: low-profile/half-height PCI-X slot populated by the SAS/SATA storage controller

(NOTE: Optional PCI-X option kit includes: Slot 1: full-length/full-height PCI-X 100; and Slot 2: low-profile/half-height PCI-X 100. PCI-X slots are 64 bits; 133 MHz capable if only one PCI-X card is installed in the server)

 395473-B21

380298-B21

365403-B21

HP StorageWorks D2D130 Backup System
NOTE: 3TB of Disk Storage.

HP StorageWorks D2D130 Backup System with Data Protector Express Software Kit
NOTE: 3TB of Disk Storage.

HP StorageWorks D2D130 Backup System with LTO-3 Ultrium 920 SAS Tape Drive
NOTE: 3TB of Disk Storage.

Following are memory options available from HP:

1 GB FBD PC2-5300 2 X 512 Kit

 397409-B21

2 GB FBD PC2-5300 2 X 1 GB Kit

 397411-B21

HP StorageWorks D2D Backup Systems
D2D110
D2D120
D2D130

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.