• Support for SATA Non-Hot Plug Midline Hard Drives

• Processor:
  • Dual-Core Intel® Xeon® 7400 processor sequence
  • Dual-Core Intel® Xeon® 5200 processor sequence
  • Quad-Core Intel® Xeon® 3300 processor sequence
  • Quad-Core Intel® Xeon® 3200 processor sequence
  • Dual-Core Intel® Xeon® 3100 processor sequence
  • Dual-Core Intel® Xeon® 3000 processor sequence
  • Dual-Core Intel® Pentium® E2160 processor
  • Single-Core Intel® Celeron® 440 processor
  • Intel® 3200 Chipset with up to 1333MHz Front Side Bus (FSB)
• Memory:
• Supports up to 8 GB of PC2-6400 (800 MHz) Unbuffered DDR2 ECC SDRAM Memory
• 4 DIMM sockets
• Storage Controller:
• Embedded SATA Controller with RAID 0/1 support
  NOTE: Transfer Rate: 3.0 Gb/s SATA
• Internal Drive Support:
• Two 3.5" (Large Form Factor) SATA or SAS hard drives
  • SAS drives require optional SAS Host Bus Adapter (HBA) or Smart Array Controller
• Internal storage capacity of up to 4.0TB (2 x 2TB SATA hard drives)
• Optional DVD-ROM or DVD-RW optical drive
• Network Controller:
• Embedded NC105i Gigabit Server Adapter
• Expansion Slots:
• Two total slots:
  • (1) Full length PCI Express x8 slot (x8 connector)
  • Can be replaced with a full-length 64-bit /133MHz PCI-X slot
  • (1) Half-length, low-profile PCI Express x4 slot (x8 connector)
• USB 2.0 Ports:
  • Up to 5 Total: (2) front; (1) internal; (2) rear accessible ports
  • Internal USB port (optional) for flexible storage, security, or USB drive key deployment
• Management:
• Standard Lights Out 100 IPMI 2.0 reporting
• DL120G5 HP Lights Out 100c Remote Management Card (Optional)
• Front Panel status LEDs including system health and UID
• Form Factor:
• 1U (1.69" / 4.30 cm) Rack Mount Chassis
• 27.5" (69.85 cm) Deep
• New fixed mounting rails included with all models
• Warranty:
  • This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
    NOTE: Server Warranty includes 1-Year Parts, 1-Year Labor, 1-Year Onsite support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Non-Hot Plug SATA /SAS

32MB shared supporting 1600x1200x16M resolution

Lights-Out 100c

Lights Out LO100c is a Remote Management Card (RMC) for ProLiant 100 series servers that do not have embedded LO100i. The LO100c has all the features of the LO100i Advanced license and allows customers, or their service providers, to remotely manage ProLiant servers over a LAN or the Internet from anywhere, anytime regardless whether the server is located in the same building, across town, or around the globe.

With LO100c, users can acquire complete remote control with Virtual KVM (graphical hardware-based, remote console). Users can also access the server's serial console, control system power, update system firmware and software, as well as monitor system environmental conditions. The LO100c remote management card can be accessed from a web browser or command line interface. This virtual "at-the-server" functionality means administrators stay in control of remote HP ProLiant 100 series servers.

The HP Lights-Out100c consists of a management processor and firmware that provides cost-effective, entry-level lights-out functionality, basic system board management functions, and diagnostics.

Automatic Server Recovery (ASR)
Integrated Management Log
Drive Parameter Tracking (with Smart Array Controllers)
Dynamic Sector Repairing (with Smart Array Controllers)
Pre-Failure Warranty (covers processors, SAS hard drives, and memory)
BIOS Serial Console
Front and Rear Unit ID (UID) button/LED

Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

The DL120 G5 Fixed Rail System supports installation in racks with square or round mounting holes (including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment range of 24" - 36".

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to: https://www.hp.com/go/factory-express.

The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. https://www.hp.com/products/configurator

HP Care Pack Services provide total care and support expertise with committed response times designed to meet your IT and business needs.

HP Care Pack services include coverage for the HP branded hardware options qualified for the server that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22-inch and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included and standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of support solutions provides a range of support services designed to meet the varying needs of your business. Whether an SMB, or large global corporation, HP has ProLiant server support offers to help you speedily deploy and maximize system uptime.

Recommended Service - simplify ProLiant solution implementation, maintenance, and management.

• Support - 3 Year 9x5 Next Business Day coverage, excluding HP holidays only
• Deployment Service - HW Installation only

Enhanced Service - optimize service level to increase IT performance and availability.

• Support - 3 Year 13x5 Same Business Day, 4-Hour response coverage only

Refer to the information on the Installation of a ProLiant on the ProLiant Data Sheet; to be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

NOTE: For a complete listing of service offerings and information visit:
https://www.hp.com/services/proliantservices
https://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html

DL120 G5 HP Lights Out 100c Kit

NOTE: Please see the following QuickSpecs for Technical Specifications and additional information:
https://h18000.www1.hp.com/products/quickspecs/12566_na/12566_na.html
(SC11Xe HBA)

NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and media see: https://www.hp.com/go/tape. For hardware and software compatibility of HP StorageWorks tape backup products see: https://www.hp.com/go/connect.

AF419A

HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A

AF504A

Optional

Empty

512 MB

Empty

Single-bank

Empty

512 MB

Empty

Dual-bank interleaved

Maximum

2 GB

2 GB

2 GB

Dual-bank interleaved

Following are memory options available from HP:

HP 2GB (1x2GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit

 450260-B21

HP 1GB (1x1GB) Dual Rank PC2-6400 (DDR2-800) Unbuffered Memory Kit

 450259-B21

Removable Media

System Unit

1.69 x 17.64 x 27.5 in (4.30 x 44.80 x 69.85 cm)

Weight
(approximate)

Maximum
(two hard drives, power supply, and processor installed)

Input Requirements
(per power supply)

Range Line Voltage

90 - 132 VAC,
180 - 264 VAC

Rated Input Current

6 A (at 100 VAC),
3 A (at 200 VAC)

Rated Input Frequency

47 to 63 Hz

- Click on the system of interest. Example: DL120 G5
- Follow the instructions of the next screens.

Power Supply Output
(per power supply)

Rated Steady-State Power

350 W (at 115/230 VRMS),
350 W (at 115/230 VRMS)

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

Non-operating

Altitude

Non-operating

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and declared average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).

Idle

LWAd

LpAm

Operating

LWAd

LpAm

44.5 dBA

Power Supply

Input voltage specifications

Rated input voltage

Input Specifications

Rated input line

90 VAC to 264VAC

Frequency range

47 to 63 Hz

Rated input power

@ 115V input, Rated input power = 500W (assume output wattage=350W
@ 230V input, Rated input power = 500W (assume output wattage=350W)

Rated input current

6 A, 3 A (110 V, 220 V)

Steady state power

350W (rated)

Relative humidity
(non-condensing)

Operating

Integrated Serial ATA Controller

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling programs in many geographic areas. For trade-in information, please go to: https://www.hp.com/go/green. To recycle your product, please go to: https://www.hp.com/go/green or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.