• Support for I/O Accelerator Mezzanine Options

Dynamic Power Capping enables you to limit the power consumption of the enclosure, by setting an enclosure Dynamic Power Cap within the Onboard Administrator. The enclosure Dynamic Power Cap will be shared amongst all of the installed devices and individual server caps will be changed to match the server load. This will optimize the performance of the servers while ensuring that the enclosure stays below the Dynamic Power Cap value.

Requires:

• Onboard Administrator V2.32 or later
• iLO V1.70 or later for each server
• iLO Advanced for BladeSystem for each server
• Latest ROM BIOS for each server

See: https://www.hp.com/go/powercapping for more information

Partner blades such as the PCI Expansion Blade, Tape Blade and SB40c are not supported on the BL2x220c.

One optional Fibre Channel HBA is supported per node by the HP ProLiant BL2x220c. Mezzanine circuit boards connect directly to the server blade system board. Fibre Channel HBAs are available via option kits and must be ordered separately.

HP ProLiant BL2x220c server blades are optimized for HP StorageWorks MSA, EVA and XP

HP ProLiant BL2x220c server blades are compatible with select 3rd party SANs (please see blade storage page for more details: https://h18000.www1.hp.com/products/servers/proliant-bl/c-class/storage.html

HP Insight Foundation

Managing the growing number of servers can be complex and expensive for your organization. IT managers need to address changing business needs with tools that meet the challenges of managing today's complex Datacenters.

HP provides management solutions that are designed to simplify a server's installation, configuration and maintenance throughout the entire server lifecycle. This provides the customer with higher levels of operational efficiency and highly reliable systems: www.hp.com/go/foundation.

The foundation pack includes:

• HP SmartStart
• HP Management
• HP ProLiant Firmware Maintenance

SmartStart version supported (minimum): SmartStart 8.15
https://www.hp.com/servers/smartstart

Microsoft Windows Server 2003 R2
Microsoft Windows Small Business Server 2003 R2
Microsoft Windows Server 2008
Microsoft Windows Small Business Server 2008
Microsoft Windows Essential Server 2008
Oracle Enterprise Linux (OEL)
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Sun Solaris for x64/x86-based Systems

NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server, please visit our Support Matrix at: https://www.hp.com/go/supportos our driver download page https://www.hp.com/support/BL2x220cG5

• Dual-Port Fibre Channel Mezzanine Card per server node for redundant SAN connection
• Two (2) embedded Gigabit Ethernet adapters per server node for redundant LAN connections
• Advanced ECC Memory - can correct a multi-bit error (up to 4 bits) that occurs within one memory chip
• Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing)
• Emergency Recovery ROM

ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support

• One (1) internal USB 2.0 connector for security key devices and USB drive keys on each server node
• Power-on password
• Administrator's password
• Integrated Lights-Out 2 has 12 customizable user accounts and SSL encryption
• Integrated Lights-Out 2 can be disabled via a Global Setting

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging, and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services on your specific server model please contact your sales representative or go to: https://www.hp.com/go/factory-express.

Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements.

HP Care Pack services provide total care and support expertise with committed response designed to meet your IT and business needs.

The HP Care Pack service for HP ProLiant BL c-Class server blades, cover the server blade and all HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the server.

To fully capitalize on your HP BladeSystem servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a HP BladeSystem server support offer to help you speedily deploy and maximize system uptime.

Recommended Service - Simplify ProLiant solution implementation, maintenance and management.

• Support Service - 4-Hour Response Coverage, 3-Year, 24 x 7, Same Business Day
• Deployment Service - Installation and Start Up for HP BladeSystem Infrastructure

Enhanced Service - Optimize service level to increase IT performance and availability

• Support Service - HP Proactive BladeSystem Service, 1-Year
• Deployment Service - Enhanced Network Installation and Start-up for HP BladeSystem Switches

Installation & Start-Up service for HP BladeSystem Infrastructure plus HP BladeSystem Enhanced Network Installation and Start-UP as per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excluding HP holidays.

For a complete listing of service offerings and information visit:
https://www.hp.com/services/bladesystemservices
https://h20219.www2.hp.com/services/us/en/warranty/carepack-servers-proliant.html

Quad-Core Models
NOTE: The BL2x220c supports 2 server nodes in each Blade. All options listed are per server node.

HP ProLiant BL2x220c G5 L5430 4G (2P)
483265-B21

HP ProLiant BL2x220c G5 E5450, 4G (2P)
483264-B21

HP ProLiant BL2x220c G5 L5420, 4G, (2P)
467696-B21

(2) Quad-Core Intel® Xeon® processor L5430 ((2.66 GHz, 1333 FSB, 50W) per server node
(2) Quad-core Intel® Xeon® Processor E5450 (3.0 GHz, 1333 FSB,80W) per server node
(2) Quad-core Intel® Xeon® Processor L5420 (2.5 GHz, 1333 FSB. 50W) per server node

NOTE: Memory configurations listed do not apply to "Factory Integrated Models".

DIMM installation guidelines:

1. All DIMMs must be PC2-5300 Registered DDR2, 667 MHz, ECC DIMMS
2. Banks must be populated in sequential alphabetic order, starting with bank 1A
3. Both DIMMs in a memory bank must be identical. Install identical DIMMs as pairs only, starting with DIMM socket 1, bank A. The server blade defaults to Advanced ECC
   

Standard Memory
4 GB (2 x 2 GB) per server node (depending on model)of PC2-5300, Registered, DDR2-667 ECC DIMMs

Standard Memory Plus Optional Memory
Up to 20 GB (depending on model) of PC2-5300, Registered, DDR2-667 ECC DIMMs. Memory is available with the installation of optional PC2-5300, Registered, DDR2-667 ECC DIMMs memory expansion kits.

Standard Memory Replaced with Optional Memory
Up to 16GB of PC2-5300, Registered, DDR2 667MHz, ECC DIMMs. Memory is available with removal of standard and the installation of optional PC2-5300, Registered, DDR2-667 ECC DIMM memory expansion kits.

Following are memory options available from HP:

408854-B21

HP ProLiant BL2x220c Server Blade

The BL2x220c Blade has a different I/O mapping for server I/O ports to expansion bays than existing half-height servers. The BL2x220c contains 2 server nodes that share a single half-height bay. Each server has 2x 1-Gbit Ethernet ports, so each half-height bay must therefore support 4 1Gbit Ethernet connections to the Interconnect bays. Full access to all embedded Ethernet ports therefore requires 64 Ethernet connections in the HP BladeSystem c7000 Enclosure or 16 Ethernet connections in the HP BladeSystem c3000 Enclosure. Single server half-height devices, such as the HP ProLiant BL460c and HP ProLiant BL465c Server Blades, only require 32 connections (c7000) and 16 connections (c3000).

As each Ethernet Interconnect device only supports 16 downlinks to the servers it is necessary to dedicate additional bays to Ethernet. To gain access to all embedded Ethernet connections users must install 4 Ethernet Interconnects in Bays 1,2,3,4 for the c7000 enclosure and 2 Ethernet Interconnects in Bays 1 & 2 in the c3000 enclosure.

When installing a BL2x220c into an existing enclosure the following rules must be followed otherwise the Blade will not boot due to an e-keying error.

c7000 Enclosure

• Interconnect bays 1,2,3,4 are reserved for Ethernet
• Fibre Channel, InfiniBand or other Interconnects must be placed in bays 5 & 6 and 7 & 8
• Bays 5 & 6 must match the mezzanine type plugged into Server A
• Bays 7 & 8 must match the mezzanine type plugged into Server B

c3000 Enclosure

• Interconnect bays 1 & 2 are reserved for Ethernet
• Fibre Channel or other Interconnects must be placed in bays 3 & 4
• Bays 3 & 4 must have interconnects of the same type or be empty

Mixing BL2x220c and other Blades in the same enclosure

Mixing of BL2x220c and other Server Blades in the same enclosure is supported but not recommended. The unique I/O mapping used by the BL2x220c requires that the I/O requirements of other blades in the enclosure conform to the rules defined for the BL2x220c.

c7000 Enclosure Notes:

• Embedded NIC Port 1 from each server (Server A and Server B) is mapped to Interconnect bays 1 and 2 which support only Ethernet devices
• Embedded NIC Port 2 from each server (Server A and Server B) is mapped to Interconnect bays 3 & 4 which support only Ethernet devices in configurations using the BL2x220
• The BL2x220 mezzanine slots connect to interconnect devices in Interconnect Bays 5 & 6 or 7 & 8

c3000 Enclosure Notes:

• Embedded NIC Port 1 from each server (Server A and Server B) can be accessed with an Ethernet interconnect in Interconnect bay 1
• Embedded NIC Port 2 from each server (Server A and Server B) is mapped to interconnect bay 2
• The BL2x220 mezzanine slots connect to interconnect devices in Interconnect Bays 3 & 4. The fabric type for the mezzanine slots and their interconnects must all be the same for c3000 configurations with the BL2x220.

1 x SFF SATA Non-Hot Plug Hard Drives
1 x SFF SATA Non-Hot Plug Hard Drives

External Storage

System performance may be reduced if operating with a fan fault or above 30°C (86°F).

• 9K jumbo frames
• TCP/IP checksum offload (TCO)
• Large send offload (LSO)
• Interrupt coalescence
• Dual address cycles (DAC)
• Wake-on-LAN (WOL)
• Pre-boot execution environment (PXE)
• ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and Switch-Assisted Load Balancing
• IPv6 packet transmit and receive (excluding all offload capabilities); IPv6 aware SNMPv1 agents for Windows

The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett Packard web site at: https://www.hp.com/go/green. These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.