New 1U server supports 2 AMD Opteron Model 250(2.4GHz/1MB) Processors and 800MHz HyperTransport Technology
Support for 2 non-hot plug *SCSI drives with U320 SCSI Host Bus Adapter and U320 SCSI Cable
*NOTE: Customers who deploy SCSI model or option will forfeit the single PCI-X expansion slot by populating slot with SCSI HBA. SCSI option is available on all ATA models while SCSI BTO model is only available on DL145 model with the AMD Opteron Model 250 (2.4GHz/1MB) processor

• AMD Opteron 8000 series chipset with HyperTransport technology
  
• 1GB or 2GB of PC2700 DDR SDRAM running at 333MHz with Advanced ECC capabilities standard, expandable to 16GB
  
• Integrated Dual Broadcom 5704 10/100/1000 NICs (Wake on LAN and PXE capable)
  
• One 40GB ATA or 36.4GB 15K SCSI hard drive standard (depending on model) with support for up to two Non-Hot-Plug ATA or *SCSI hard drives
  
• One PCI-X 64-bit/133MHz PCI slot
  
• Integrated ATI Rage XL with 8MB SDRAM video
  
• 500W Power Supply (Non-Hot Plug, auto-switching)
  
• DL145 Lights-Out 100 Integrated Remote Management Card
  
• 1 x front and 1 x rear USB ports
  
• Rear accessible shared serial port
  
• ROM Setup Utility
  
• Protected by HP Services, one-year limited warranty which is fully supported by HP Services and a worldwide network of resellers and service providers. In addition, 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services. Certain restrictions and exclusions apply.

*NOTE: Customers who deploy SCSI model or option will forfeit the single PCI-X expansion slot by populating slot with U320 SCSI HBA.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging. HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA3000 & EVA5000, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services on your specific server model please contact your sales representative or go to https://www.hp.com/go/factory-express.

HP Services provides a one-year, limited warranty fully supported by HP Services and a worldwide network of resellers and service providers. In addition, 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services.

NOTE: Limited warranty includes 1 year parts, 0 years Labor, 0 years on-site support

Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

• Installation and start up
• Education courses
• Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair
• Comprehensive range of software technical support for Microsoft, Linux and ProLiant Essentials solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.
• System Management, Performance Services and Mission Critical Support Solution
  

HP Care Pack Services include HP branded hardware options qualified for the server, purchased at the same time or afterwards, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3KVA. 22" and smaller external monitors will be covered at the same service level and coverage period as the server. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack.

NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at:
https://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: https://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at: https://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

Memory Options

1. Support for up to 16 GB of industry-standard PC2700 registered ECC DDR SDRAM memory
   
2. Dual-Channel Memory Architecture

Memory Guidelines

1. Bank 1A must always be populated.
   
2. DIMMs must be installed in pairs and starting at the bank closest to the processor.
   
3. All DIMMs in a bank must have the same part number.
   
4. DIMMs on different banks can be of different sizes.
   
5. Processor 2 must be installed before banks 2A and 2B are populated.
   
6. If processor 2 is installed, it is recommended that bank 2A be populated before populating bank 1B.
   

Following are memory options available from HP:

• 1GB of Advanced ECC PC2700 DDR SDRAM DIMM Memory Kit (2 x 512 MB)

361037-B21

• 2GB of Advanced ECC PC2700 DDR SDRAM DIMM Memory Kit (2 x 1GB)

361038-B21

• 4GB of Advanced ECC PC2700 DDR SDRAM DIMM Memory Kit (2 x 2GB)

Relative Humidity
(non-condensing)

L WAd (BELS)

L WAd (BELS)