The flagship ML370 G5 provides industry-leading
management, performance and availability in a dual processor expansion
server engineered to excel in a variety of environments - from corporate
work groups in growing businesses to critical remote sites requiring continuous
accessibility and uptime.
Processors:
Quad-core Intel® Xeon® 5400 sequence processors with
12MB Level 2 cache (6MB per die) for blazing performance
Servers support up to 2 processors (2 processors standard on all
Performance models)
Preconfigured Performance models save valuable deployment time
at a discounted bundle price
Intel® 5000P chipset
Memory:
Maximum 64 GB of PC2-5300 Fully Buffered DIMMs (DDR2-667) running
at 667MHz of 4:1 interleaved memory with Advanced ECC capabilities
including Online Spare and Mirrored Memory (8 FB DIMMs per memory
card; up to 2 supported) NOTE: Memory DIMMs in systems
with the Front Side Bus (FSB) running at 1333 MHz will run at 667
MHz and in systems with a FSB running at 1066 MHz or 667 MHz the
memory DIMMs will run at 533 MHz.
Storage Controller:
Base Models: HP Smart Array P400/256MB Controller
Performance Models: HP Smart Array P400/512MB BBWC Controller
Entry Models: HP Smart Array E200/64MB Controller
Internal Drive Support:
Up to (16) hot-plug Serial-attached SCSI (SAS) drives supported
(8) drive bays in standard configurations
Optional 8-bay drive cage available for maximum storage support
(2nd drive bay cage will require additional SAS controller)
Two open half-height media bays; supports full height or half
height internal tape drive
Network Controller:
Two embedded NC373i Multifunction Gigabit Network Adapters with
TCP/IP Offload Engine, including support for Accelerated iSCSI through
an optional Licensing Kit
Expansion Slots:
Nine total expansion slots
Eight available: (6) PCI-Express x4 and (2) PCI-X 64-Bit/133MHz
USB Ports:
USB 2.0 support
Six total ports: (2) ports up front; (2) ports in back; (2) ports
internal (one standard connection and one USB tape connection)
Redundancy:
Optional Hot plug redundant power supplies and cooling fans
Hot plug redundant fans and power supplies included on all Performance
models
Infrastructure Management:
Convenient slide-out Systems Insight Display for quick and easy
front view server diagnostics, along with status LEDs, Automatic
Server Recovery (ASR), ROM Based Setup Utility (RBSU)
HP ProLiant Onboard Administrator (powered by the HP Integrated
Lights-Out 2 management processor) for simplified server setup,
health monitoring and recovery, power and thermal control, and lights-out
remote administration.
HP Insight Control a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, control and optimize your IT infrastructure
through a single, simple management console. Insight Control supports
both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated
command center that enables IT Staff personnel to continuously analyze
and optimize a converged infrastructure, while automating and reducing
the cost of common data center tasks by as much as 40 percent. This
ultimately enables them to dynamically keep pace with the organization's
changing business requirements.
Form Factor:
5U tower and rack models available (front VGA connection on rack
models)
Operating Systems and Virtualization Software Support for ProLiant
Servers:
Supports Windows, RHEL, SLES, OEL, Solaris, VMware, and Citrix
Deployment/Serviceability:
System Insight Display on the front bezel for quick and easy
server diagnostics
Quick Deploy Rail System includes sliding universal rails, an
ambidextrous cable management arm and quick release levers
Tool-less access to all system components for easy in-rack serviceability
Customer Self Repair (CSR): HP products are designed with many
CSR parts to minimize repair time and allow for greater flexibility
in performing defective parts replacement
Warranty:
This product is covered by a global limited warranty and supported
by HP Services and a worldwide network of HP Authorized Channel
Partners resellers. Hardware diagnostic support and repair is available
for three years from date of purchase. Support for software and
initial setup is available for 90 days from date of purchase. Enhancements
to warranty services are available through HP Care Pack services
or customized service agreements. Hard drives have either a one
year or three year warranty; refer to the specific hard drive QuickSpecs
for details. NOTE: Server Warranty includes
3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business
day response. Warranty repairs may be accomplished through the use
of Customer Self Repair (CSR) parts. These parts fall into two categories:
1) Mandatory CSR parts are designed for easy replacement. A travel
and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for
easy replacement but may involve added complexity. Customers may
choose to have HP replace Optional CSR parts at no charge. Additional
information regarding worldwide limited warranty and technical support
is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
NOTE:
For a brief, printer friendly data sheet that describes this product and informs
you of the essential capabilities and specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-6361ENW.pdf.
NOTE: For the Standard Features shipped in the "Factory Integrated
Models", please see the "Configuration Information - Factory Integrated
Models" section.
Quad-Core Intel® Xeon®
Processor E5450 (3.00 GHz, 80 Watts, 1333 FSB) NOTE:
Available via Configure-to-order only. See Factory Integrated Models section
for more details.
NOTE: Up to 2 processors supported. Performance configurations
include two processors. NOTE: Please contact your regional sales support to determine Quad-Core
upgradeability. Some of the earlier shipping models may not support upgrades
to 5400/5400 Quad-Core processors. 5100 Dual-Core models are not upgradeable
to the 5200 Dual-Core processors.
Cache
Memory One of the following depending on Model
PC2-5300 Fully Buffered DIMMs
(DDR2-667) running at 533 MHz with 4:1 interleaving NOTE: 4-way interleaving requires
optional 2nd memory card.
Standard (Entry Models)
1 GB (2 x 512 MB)
Standard (Base Models)
2 GB (2 x 1 GB)
Standard
(Performance Models)
4 GB (4 x 1 GB)
Maximum
64 GB (16 x 4 GB with 2 memory
cards)
NOTE:
Memory DIMMs in systems with the Front Side Bus (FSB) running at 1333
MHz will run at 667 MHz and in systems with a FSB running at 1066 MHz or
667 MHz the memory DIMMs will run at 533 MHz.
Network Controller
Two embedded NC373i Multifunction
Gigabit Network Adapters with TCP/IP Offload Engine, including support for
Accelerated iSCSI through an optional Licensing Kit
Expansion
Slots
Expansion
Slot #
Technology
Width
Connector
Width*
Bus
Number**
Form
Factor
Notes
1
PCIe
x4
x8
6
Full
length, full height slot
Reserved
for integrated RAID controller
2
PCI-X
(133MHz, 3.3 Volt)
64-bit
Not
applicable
18
Full
length, full height slot
Shared
bus with slot 3
3
PCI-X
(133MHz, 3.3 Volt)
64-bit
Not
applicable
18
Full
length, full height slot
Shared
bus with slot 2
4
PCIe
x4
x8
14
Full
length, full height slot
5
PCIe
x4
x8
11
Full
length, full height slot
Optional
x8 if PCIE expander is installed in slot 4
6
PCIe
x4
x8
31
Full
length, full height slot
7
PCIe
x4
x8
28
Full
length, full height slot
Optional
x8 if PCIE expander is installed in slot 6
8
PCIe
x4
x8
25
Full
length, full height slot
9
PCIe
x4
x8
22
Full
length, full height slot
Optional
x8 if PCIE expander is installed in slot 8
*
Default bus assignment. Inserting cards with PCI bridges may alter the actual
bus assignment number. ** Slots are enumerated differently based on OS. MS
OS's enumerate from lowest to highest Device ID by bus (starting with the lowest
bus).
Storage Controller One of the following depending on Model
Base Models
HP Smart Array P400/256MB Controller
(RAID 0/1/1+0/5) Available upgrades: 512MB memory BBWC module for, or battery for
battery-backed write cache (BBWC) RAID 0/1/1+0/5/6.
Performance Models
HP Smart Array P400/512MB BBWC
Controller (RAID 0/1/1+0/5/6)
Entry Models
HP Smart Array E200/64MB Controller
(RAID 0/1/1+0) Available upgrades: 128MB memory module for RAID 0/1/1+0/5, battery
for battery-backed write cache (BBWC).
Storage
Diskette Drive
None standard
Optical Drive One of the following depending on Model
DVD-ROM Drive (Performance Models)
48x IDE CD-ROM Drive (Base and
Entry Models)
NOTE: All units
after 11/12/2007 will come standard with a DVD-ROM Drive.
Hard Drives
None standard
Maximum
Internal Storage
Hot
Plug SAS
4.0TB
8 x 500GB with standard 8-bay
hot plug Serial-attached SCSI (SAS) drive cage
8.0TB
16 x 500GB with optional 2nd
SAS drive cage
Hot
Plug SATA
8.0TB
16 x 500GB
Intelligent
Manageability
HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
Hot Spare Boot NOTE: Upon the event of a failed
processor in a multi-processing environment, the system will automatically
reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Interfaces
Serial
1
(2nd serial and parallel port available via option Kit)
1
(available for DAT USB tape connectivity) NOTE:
Internal USB ports are optimal for the attachment of HP DAT USB Internal Tape
Drives
Graphics
Integrated ATI ES1000, 32 MB video standard
16 bit color:
maximum resolution of 1600 x 1200
32 bit color: maximum resolution of
1280 x 1024
NOTE: Maximum
resolution available via iLO 2 remote console is 1280 x 1024.
Form Factor
Tower and Rack (5U) models available
HP Insight management
software
HP Insight Foundation
Managing the growing number of servers can be complex and expensive for
your organization. IT managers need to address changing business needs
with tools that meet the challenges of managing today's complex Datacenters.
HP provides management solutions that are designed to simplify a server's
installation, configuration and maintenance throughout the entire server
lifecycle. This provides the customer with higher levels of operational
efficiency and highly reliable systems: www.hp.com/go/foundation.
HP ProLiant Onboard Administrator (powered by the HP Integrated Lights-Out
2 management processor) simplifies server setup, health monitoring, power
and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP ProLiant Onboard Administrator functions without
additional software, and can be accessed from any location via a web browser.
It works hand-in-hand with HP Systems Insight Manager, Insight Control
suites, and the Insight Dynamics for ProLiant helping customers unlock
the value of the ProLiant platform and deliver the highest possible quality
of IT service to the business. See www.hp.com/go/ProLiantOA
HP Insight Control
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to deploy,
migrate, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP
Insight Control for Linux, and HP Insight Control. See www.hp.com/go/insightcontrol
HP Insight Control includes one year of 24 x 7 HP Software Technical Support
and Update Service ensuring rapid access to HP support staff and proactive
delivery of software updates. For more information about this service,
please visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant
HP Insight Dynamics for ProLiant,
a product option, is an integrated command center that enables IT Staff
personnel to continuously analyze and optimize a converged infrastructure,
while automating and reducing the cost of common data center tasks by as
much as 40 percent. As a powerfully integrated by design toolkit to accelerate
complex technology projects and simplify daily operations that ultimately
enable IT Staff personnel to dynamically keep pace with the organizations
changing business requirements. It enables them to plan capacity and power
continuously, balance across physical and virtual resources, and ensure
cost-effective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared resources
using a self-service portal. Resources provisioned can range from a single
virtual machine to complex multi-tier environments and their associated
physical and virtual resource requirements. In addition to the previous
functional benefits, it also provides a cost-effective disaster recovery
for physical and virtual environments that works with HP StorageWorks Continuous
Access software for both the Enterprise Virtual Array and the XP storage
array allowing application environments to be reactivated in minutes with
the touch of a button to a remote location.
ACPI 1.0b Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
PXE Support
Security
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Parallel and serial interface control
Administrator's password
Server
Power Cords
110V NEMA -6ft.
(1.83m) cord included; IEC 6 ft. (1.83m) cords also included with rack models.
NOTE: HP ProLiant ML370 a C13 to C14
2.8M jumper cord ships standard. If customers require a local power cord, they
can check the power cord matrix for the appropriate sku. Please see the following
power cord matrix: http://www.hp.com/go/powercordmatrix.
Power Supply
800 Watt-CE Mark Compliant Hot
Plug Power Supply (1000 Watt high line)
Optional second Power Supply provides redundant capability NOTE: Please see the "Power
Specifications" section later in this document for low line and high
line requirements.
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable
matrix's on the HP Power Protection and Management page. Under Power Cords,
click on the "HP Power Cord Matrix" link. That link will list
cable descriptions, requirements, and specifications for UPS and PDU units.
Please see the following link: www.hp.com/products/powercords
System Fans
Three hot-plug fans standard.
Redundant fan kit includes three additional fans.
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for
OS and Virtualization Software and latest listing of software drivers available
for your server, please visit our Support Matrix at: http://www.hp.com/go/ossupport
and our driver download page http://www.hp.com/support/ML370G5
Rack Airflow Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series
Racks provide enhanced airflow for maximum cooling, allowing these racks
to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack
is used, observe the following additional requirements to ensure adequate
airflow and to prevent damage to the equipment:
Front and rear doors:
If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from
top to bottom to permit adequate airflow (equivalent to the required
64 percent open area for ventilation).
Side: The clearance between
the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels
to fill all remaining empty front panel U-spaces in the rack. This arrangement
ensures proper airflow. Using a rack without blanking panels results in
improper cooling that can lead to thermal damage.
NOTE: For additional
information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the
Support section at the following URL: www.hp.com/servers/ml370-g5.
Rack Kit
Quick deploy rail system provides
tool-free support for racks with square or round mounting holes (including
Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range
of 24" - 36". The ambidextrous cable management arm can be mounted
on either the left or right side for improved cable management.
Telco Rack Support
Support for all 2-post Telco racks requires the use of the standard rack
kit and an additional option kit from Rack Solutions at: http://www.racksolutions.com/hp/
Factory
Express Portfolio for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment
services for HP servers and storage products. Customers can choose how their factory
solutions are built, tested, integrated, shipped and deployed.
Factory
Express offers service packages for simple configuration, racking, installation,
complex configuration and design services as well as individual factory services,
such as image loading, asset tagging, and custom packaging. HP products supported
through Factory Express include a wide array of servers and storage: HP Integrity,
HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well
as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific
server model please contact your sales representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise Configurator
The HP eCo-Enterprise Configurator
now provides factory default racking for our HP hardware portfolio. This
approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration,
please contact HP's Customer Business Center or an Authorized Partner for
assistance. http://www.hp.com/products/configurator.
Service and Support
HP Care Pack services provide total care and support expertise with committed
response designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options
qualified for the server and purchased at the same time or afterward that
are internal to the enclosure. This also includes the 22" and smaller
external monitors and tower UPS options up to 3kVA. These items will be
covered at the same service level and for the same coverage period as
the server. Coverage of UPS Battery is not included, and standard warranty
terms & conditions apply. For servers or storage systems installed
within a rack, service also covers all HP qualified rack options installed
within the same rack.
To fully capitalizing on your HP ProLiant servers' capabilities requires
a service partner who thoroughly understands your server technology and
systems environment. HP Services, an industry leader in provision of multi
vender support solutions, provides a range of support services designed
to meet the varying needs of your business. Whether an SMB, or large global
corporation, HP has a ProLiant server support offer to help you speedily
deploy and maximize system uptime.
Recommended Service - simplify ProLiant solution implementation,
maintenance, and management.
Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage
only
Deployment Service: Installation and Start up only
Enhanced Service - optimize service level to increase IT performance
and availability.
Support: 3-Year Support Plus 24 only
Refer to the information on "Installation & Start-Up" for
service on ProLiant server and Microsoft or Linux O/S per the Customer
Description and/or Data Sheet; to be delivered on a scheduled basis 8am-5pm,
M-F, excluding HP holidays.
NOTE:
For the Standard Features shipped in the "Factory Integrated Models",
please see the "Configuration Information – Factory Integrated
Models" section.
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure
a Factory Integrated Model. To ensure only valid configurations are ordered,
HP recommends the use of an HP approved configurator. Contact your local
sales representative for information on CTO product offerings and requirements. NOTE: HP does not allow factory integration of options into standard
models listed above. Configure-to-order servers must start with a CTO
Chassis. NOTE: FIO indicates that this option only available as a Factory
Installable Option.
Step
1: Base Configuration (choose one of the following configurable models)
Models
HP ML370 G5
Rack SAS CTO Chassis
400606-B21
Factory Integrated
Model ships with:
Two embedded NC373i
Multifunction Gigabit Sever Adapters
Eight Hot Plug SAS Drive Bays
9 expansion slots - 7 PCI-Express x4 and 2 PCI-X 64-bit 133 MHz
Integrated Lights-Out 2 (iLO2)
800 Watt-CE Mark Compliant Hot Plug Power Supply
Three fans
Rack (5U)
HP ML370 G5
Tower SAS CTO Chassis
400607-B21
Factory Integrated
Model ships with:
Two embedded NC373i
Multifunction Gigabit Sever Adapters
Eight Hot Plug SAS Drive Bays
9 expansion slots - 7 PCI-Express x4 and 2 PCI-X 64-bit 133 MHz
Integrated Lights-Out 2 (iLO2)
800 Watt-CE Mark Compliant Hot Plug Power Supply
Three fans
Keyboard
2-button Mouse
Tower (5U)
Step
1A: Choose Storage Controller (only one of the following)
The HP ProLiant
ML370 G5 Performance Packs are necessary to configure a HP ProLiant ML370
G5 High Performance Model which includes the latest performance technologies
and enterprise class availability features pre-installed for convenience
and value. The Performance Pack includes a 2nd processor, redundant fan,
power supply, and memory expansion board. NOTE: Must also select 217503-B21
to achieve parity to ML370 G5 High Performance Models.
HP ML370G5 X5450
HPM FIO Perf Pack
460928-B21
HP ML370G5 E5345
HPM FIO Perf Pack
436374-B21
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" and
"Additional Options" section below.
ML370
G5 SAS SFF 8-bay Drive Cage Kit NOTE:
Optional 2nd drive cage requires a dedicated storage controller.
401415-B21
Diskette Drive
Floppy Drive
ML350/370 G5 Kit
409582-B21
Serial Port Kit
Parallel/Serial Port ML370/350
G5 Kit
401222-B21
Hard Drives
NOTE: The components
of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and
the server backplane) should operate at the same data transfer rate or the
system bandwidth will be negotiated down to an acceptable level for all
components.
HP NC364T PCI Express Quad Port
Gigabit Server Adapter NOTE: There is a maximum of five
NC364T PCI Express Quad Port Gigabit Server Adapters allowed in this server.
HP NC522SFP Dual Port 10GbE Server
Adapter NOTE: A minimum of two gigabyte (2
GB) of server memory is required per each NC522SFP adapter. NOTE: Direct Attach Cable (DAC) for copper environments or fiber
transceivers and cables for fiber-optic environments must be purchased separately.
HP Insight Control server deployment,
Electronic License including 1 year of 24x7 Technical Support and Updates
T9082AAE
NOTE: Electronic
and Flexible-Quantity licenses can be used to purchase multiple licenses
with a single activation key. NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Customer will receive a license entitlement certificate. The
license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP
Software Technical Support and Update Service. NOTE: Licenses ship without media. The HP Insight Control Media Kit
can be ordered separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: For additional license options please see the Insight Control
QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux,
1-server license, including one year of 24x7 Technical Support and Updates,
Electronic
T9084BAE
HP Insight Control for Linux,
No Media, 1-Server license, including one year of 24x7 Technical Support
and Updates
464423-B22
HP Insight Control for Linux,
Media pack (DVD) - No licenses included NOTE: Media pack DVD contains HP
Insight Control for Linux, HP Systems Insight Manager, HP Insight Control
power management, HP Insight Control virtual machine management, and an
integrated installer. Servers must be acquired separately.
464422-B22
NOTE: Licenses
ship without media. The HP Insight Control Media Kit can be ordered separately,
or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic software is available in all countries except China
and Japan. Customers in China and Japan should order the physical equivalent. NOTE: Electronic and Flexible-Quantity licenses can be used to purchase
multiple licenses with a single set of activation keys. NOTE: For additional License Kits, including electronic licensing
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out Advanced
HP Integrated Lights-Out Advanced,
No Media, 1-Server License, including 1 year of 24x7 Technical Support and
Updates NOTE: This license allows 1 server
to be deployed and managed via HP iLO Advanced. Customer will receive a
printed license entitlement certificate via physical shipment. The license
entitlement certificate must be redeemed online or via fax in order to obtain
the license activation key(s). Includes one year of 24 x 7 HP Software Technical
Support Service NOTE: For additional license kits, including electronic delivery
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/12362_na/12362_na.html
512485-B21
HP Insight Rapid Deployment software
HP Insight Rapid Deployment software
No Media 1-Server License, including 1 year of 24x7 Technical Support and
Updates NOTE: This license allows 1 server
to be deployed and managed via RDP. Customer will receive a printed license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online or via fax in order to obtain the license activation
key(s). Includes one year of 24 x 7 HP Software Technical Support Service NOTE: For additional license kits, including electronic delivery
options, please see the QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/11053_na/11053_na.html
HP SC44Ge Host Bus Adapter NOTE: When using the SC44Ge with
SATA Hard Drives, 1.5G SATA Hard Drives are required. Transfer rate: 1.5
Gb/s SATA, 3 Gb/s SAS.
SAS Tape Drives NOTE: For the ML370 G5, HP recommends
purchasing the HP SC44Ge HBA ( 416096-B21) for a dedicated SAS HBA for tape.
HP DAT 320 SAS Internal Tape Drive
AJ830A
HP StorageWorks LTO-2 Ultrium
448 SAS Internal Tape
DW085A
HP StorageWorks LTO-3 Ultrium
920 SAS Internal Tape Drive
EH847A
HP StorageWorks LTO-4 Ultrium
1760 SAS Internal Tape Drive
EH919A
NOTE: Please refer
to the "Tape Drives, Tape Autoloaders & Tape Libraries" table
in the Storage section of this document for a list of SAS controllers with
tape support.
HP StorageWorks 1/8 G2 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-4 Ultrium
1760 SAS Tape Autoloader
AK377A
HP StorageWorks 1/8 G2 LTO-3 Ultrium
920 SAS Autoloader
AH558A
HP StorageWorks 1/8 G2 Tape Autoloader
Rack Kit NOTE: Required to install the 1/8
G2 Autoloaders in a standard 19-inch rack; includes rails and rackmount
instructions.
AH166A
NOTE: Please reference
the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at: http://www.hp.com/go/ebs.
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-4
Ultrium 1760 SAS Drive Library
AK378A
HP StorageWorks MSL2024 1 LTO-3
Ultrium 920 SAS Drive Library
AH559A
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 2 LTO-4
Ultrium 1760 SAS Drive Library
AK380A
HP StorageWorks MSL4048 1 LTO-3
Ultrium 920 SAS Drive Library
AH560A
NOTE: Please reference
the MSL Tape Library QuickSpecs at: http://www.hp.com/go/automation
for additional information needed to create a complete solution; reference
current compatibility information at: http://www.hp.com/go/ebs.
Disk-Based Backup
RDX Removable Disk Backup
HP StorageWorks RDX500 Internal
Removable Disk Backup System NOTE: 500GB of Disk Storage.
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Shock Pallet NOTE: Due to handling and shipping
requirements, AF044A is only orderable through HP Factory Express. It is
not for direct sales. Customer site surveys are required before an order
is approved. CTO orders may require additional lead time.
AF044A
10647 G2 (47U) Rack Cabinet 1200mm
Deep - Pallet
AF045A
NOTE: It is mandatory
to use a shock pallet when shipping racks with equipment installed. NOTE: xxxxxx-B22 (shock pallet) used to ship racks with equipment
installed (by custom systems, VARs and Channels).
NOTE: Cat5e cables
are required to connect Interface Adapters to Console Switches. Cat5e cables
can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
NOTE: Cat5e cables
are required to connect Serial Adapters to Serial Console Servers. Additional
Serial Adapters and Cat5e cables can be found at the following URL: http://www.hp.com/go/kvm.
NOTE: For additional
information regarding KVM switches, Serial Console servers, rack mount monitors,
keyboards and all related options please see the following URL: http://www.hp.com/go/kvm.
USB and SD Options
HP USB 2-Button Optical Scroll
Mouse (Carbonite/Silver)
Service
and Support Offerings
(HP Care Pack Services)
Hardware Services On-site Service
NOTE: To attach
3 year, 4-Hour On-site Service to Smart Buy servers, Smart Buy Care Packs
must be used. For other service levels, order standard Care Pack part numbers.
4-Hour On-site Service, 5-Day
x 13-Hour Coverage, 3 Years, Electronic
U4528E
4-Hour On-site Service, 7-Day
x 24-Hour Coverage, 3 Years, Electronic
U4529E
NOTE: Use one
of the following Smart Buy Care Packs to attach 3 year, 4-Hour On-site Service
to Smart Buy servers. For other service levels, order standard Care Pack
part numbers.
ML370 Smart Buy 4-Hour On-site
Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
UE903E
ML370 Smart Buy 4-Hour On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
UE904E
Hardware Services 6-Hour Call
to Repair On-site Service
6-Hour Call to Repair, On-site
Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
U4530E
Installation & Start-up
Services
Hardware Installation, Electronic
U4538E
Installation & Start-Up of
a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl.
HP holidays, Electronic
U4539E
Support Plus
Onsite HW support, 8am-9pm, M-F,
4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion,
8am-9pm, M-F 2hr response time excl. HP holidays, Electronic
U4540E
Support Plus 24
Onsite HW support 24x7, 4hr response
and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U4541E
Onsite HW support 24x7, 4hr response
and SuSE Linux SW Tech support offsite, onsite at HP's discretion, 24x7
2hr response time incl. HP holidays, Electronic
U6311E
Onsite HW support 24x7, 4hr response
and Red Hat ES Linux SW Tech support offsite, onsite at HP's discretion,
24x7 2hr response time incl. HP holidays, Electronic
NOTE:
Memory configurations listed do not apply to "Factory Integrated Models". NOTE: Memory DIMMs in systems with the Front Side Bus (FSB) running
at 1333 MHz will run at 667 MHz and in systems with a FSB running at 1066
MHz or 667 MHz the memory DIMMs will run at 533 MHz.
HP ProLiant ML370 G5 Models
Minimum Memory
1 GB PC2-5300 Fully Buffered DIMMs (DDR2-667) running at 533 MHz (2 x
512 MB)
Maximum Memory Replaced with Optional Memory
Up to 64 GB of memory is available with the removal of the standard 1
GB of memory. With 2 memory cards: 4 GB PC2-5300 Fully Buffered DIMMs
(DDR2-667) running at 533 MHz (16 x 4 GB with 2 memory cards).
NOTE: Not all FB DIMM sizes available
at product launch. NOTE: This chart does not represent all possible memory configurations.
NOTE: Memory DIMMs in systems with the Front Side Bus (FSB) running
at 1333 MHz will run at 667 MHz and in systems with a FSB running at 1066
MHz or 667 MHz the memory DIMMs will run at 533 MHz.
ML370 G5 Hard Drives NOTE: The components of a storage
subsystem (e.g. the drive, the HBA/controller, firmware, and the server
backplane) should operate at the same data transfer rate or the system bandwidth
will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty;
refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF Enterprise
(ENT) Drives
Quantity
Supported
Position
Supported
Controller
300GB 6G SAS 10K DP 300GB 3G SAS
10K DP 146GB 6G SAS 15K DP 146GB 3G SAS 15K DP 146GB 6G SAS 10K DP
146GB 3G SAS 10K DP
72GB 6G SAS 15K DP 72GB 3G SAS 10K DP
72GB 3G SAS 15K DP
Up to 16
1-16
HP Smart Array E200/64MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256MB Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller
SAS Hot Plug SFF Midline
(MDL) Drives
Quantity
Supported
Position
Supported
Controller
500GB 6G SAS 7.2K DP
Up to 16
1-16
HP Smart Array E200/64MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256MB Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller
SATA Hot Plug SFF
Midline (MDL) Drives
Quantity
Supported
Position
Supported
Controller
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
Up to 16
1-16
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller
SATA Hot Plug SFF
Entry (ETY) Drives
Quantity
Supported
Position
Supported
Controller
250GB 3G SATA 5.4K
120GB 1.5G SATA 5.4K
Up to 16
1-16
HP 8 Internal Port SAS HBA with
RAID NOTE: When using the 8 Internal Port
SAS HBA with SATA Hard Drives, 1.5G SATA Hard Drives are required. NOTE: Transfer rate 1.5 Gb/s SATA, 3Gb/s SAS.
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller
SATA Hot Plug Midline
(MDL) Solid State Drives
Quantity
Supported
Position
Supported
Controller
60GB 3.0G SATA SSD
120GB 3.0G SATA SSD
Up to 16
1-16
HP 8 Internal Port SAS HBA with
RAID NOTE: When using the 8 Internal Port
SAS HBA with SATA Hard Drives, 1.5G SATA Hard Drives are required. NOTE: Transfer rate 1.5 Gb/s SATA, 3Gb/s SAS.
HP Smart Array E200/64 MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array E500/256MB Controller
HP Smart Array P400/256 MB Controller
HP Smart Array P400/512 MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
HP Smart Array P800/512 BBWC Controller
External Storage
Quantity
Supported
Position
Supported
Host Controller or Adapter
50
Modular Smart Array
1
per external VHDCI SCSI connector
External
HP
Smart Array P600/256 BBWC Controller
60
Modular Smart Array
Up
to 8
External
HP
Smart Array E500/256MB Controller
Up
to 4
HP Smart Array P600/256
BBWC Controller
Up
to 8
HP Smart Array P800/512
BBWC Controller
70
Modular Smart Array
Up
to 4
External
HP
Smart Array E500/256MB Controller
Up
to 2
HP Smart Array P600/256
BBWC Controller
Up
to 4
HP Smart Array P800/512
BBWC Controller
Tape
and Disk-Based Backup
NOTE: For a complete listing of compatible
tape and disk-based backup offerings, please visit: www.hp.com/go/connect
Position
Supported
Controller
Controller/HBA
Option Kit Part Number
Internal
USB Tape Drives DAT 40 USB DAT 72 USB DAT 160 USB
B,C
USB
2.0 Port
N/A
USB Tape Drives, External
DAT 40 USB DAT 72 USB DAT 160 USB 1U Rack-Mount Kit
External
USB
2.0 Port
N/A
SCSI Tape Drives, Internal
LTO-1 Ultrium 232 LTO-2 Ultrium 448 LTO-3 Ultrium 920 LTO-4 Ultrium
1760 DAT 40 DAT 72 DAT 160
SAS Tape
Drives, External DAT 160 SAS LTO-2 Ultrium 448 SAS LTO-3 Ultrium
920 SAS LTO-4 Ultrium 1760 SAS LTO-4 Ultrium 1840 SAS 1U Rack-Mount
3U Rack-Mount
To drill down to calculators:
- Click on: "ProLiant Servers"
- Click on the Server of interest. Example: ML370 G5
- Click on: "Power Calculator" link. (You may need to scroll
down to see it)
- Click on the system of interest. Example: ML370 G5
- Follow the instructions of the next screens
Power
Supply Output (per power supply)
Rated
Steady-State Power
800 W
(at 100 VAC) 850 W (at 120 VAC) 1000 W (at 200-240 VAC)
Maximum Peak Power
800
W (at 100 VAC) 850 W (at 120 VAC) 1000 W (at 200-240 VAC)
System Inlet Temperature
Operating
10°
to 35°C (50° to 95°F) at sea level with an altitude derating of 1.0°C
per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of
3050 m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr
(18°F/hr). The upper limit may be limited by the type and number of options
installed. System performance may be reduced if operating with a fan fault
or above 30°C (86°F).
Non-operating
-30°
to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Relative
Humidity (non-condensing)
Operating
10
to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet bulb temperature,
non-condensing.
Non-operating
5
to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature,
non-condensing.
Altitude
Operating
3050
m (10,000 ft). This value may be limited by the type and number of options installed.
Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Non-operating
9144
m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed
are the declared A-Weighted sound power levels (LWAd) and declared average bystander
position A-Weighted sound pressure levels (LpAm) when the product is operating
in a 23°C ambient environment. Noise emissions were measured in accordance
with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.2
B for Redundant 6.3 B for Non-Redundant
LpAm
43
dBA for Redundant 44 dBA for Non-Redundant
Operating
LWAd
6.2
B for Redundant 6.3 B for Non-Redundant
LpAm
43
dBA for Redundant 44 dBA for Non-Redundant
Emissions
Classification (EMC)
FCC
Rating
Class B
Normative
Standards
CISPR 22; EN55022; EN55024;
FCC CFR 47, Pt 15; ICES-003; CNS13438; GB9254; K22;K24; EN 61000-3-2; EN 61000-3-3;
EN 60950-1; IEC 60950-1
NOTE:
Product conformance to cited product specifications is based on sample (type)
testing, evaluation, or assessment. This product or family of products is eligible
to bear the appropriate compliance logos and statements.
Smart Array P400
Controller
Disk Drive and Enclosure
Interface
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology
Attachment)
SAS Connectors
2 internal (SFF8484) x4 wide port
connectors
Cache Memory Speed
DDR2-533MHz with 40 or 72-bit wide
bus provides up to 4.2 GB/s maximum bandwidth.
64-bit, supporting greater than
4GB server memory space
RAID Support
RAID 6 with ADG (Advanced Data Guarding)
requires Battery Backed Write Cache Upgrade
RAID 5 (Distributed Data Guarding)
RAID 1, 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Two embedded NC373i Multifunction Gigabit Server Adapters
Network
Interface
10Base-T/100Base-TX/1000Base-TX
Compatibility
IEEE
802.3 10Base-T
IEEE
802.3ab 1000Base-T
IEEE
802.3u 100Base-TX
Data
Transfer Method
PCI
Express, four lanes (x4)
Network
Transfer Rate
10Base-T (Half-Duplex)
10
Mb/s
10Base-T (Full-Duplex)
20
Mb/s
100Base-TX (Half-Duplex)
100
Mb/s
100Base-TX (Full-Duplex)
200
Mb/s
1000BaseTX (Half
and Full-Duplex)
2000 Mb/s
Connector
RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m)
100Base-TX
Category 5 or higher UTP;
up to 328 ft (100 m)
1000Base-TX
Category
5 or higher UTP; up to 328 ft (100 m)
Environment-friendly Products and Approach
End-of-life
Management and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green.
To recycle your product, please go to: http://www.hp.com/go/green
or contact your nearest HP sales office. Products returned to HP will be recycled,
recovered or disposed of in a responsible manner.
The EU WEEE directive
(2002/95/EC) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly
instructions) is posted on the Hewlett Packard web site at: http://www.hp.com/go/green.
These instructions may be used by recyclers and other WEEE treatment facilities
as well as HP OEM customers who integrate and re-sell HP equipment.
DL QuickSpecs
US QuickSpecs 
405132-B21
